[PATCH v3 1/2] automation: add Ubuntu container for Xilinx hardware tests

[Stefano Stabellini <sstabellini@xxxxxxxxxx>]

From: Stefano Stabellini <stefano.stabellini@xxxxxxx>

This container is only run on the controller PC (x86) to trigger the
test on a connected Xilinx ZCU102 physical board.

Signed-off-by: Stefano Stabellini <stefano.stabellini@xxxxxxx>
Reviewed-by: Michal Orzel <michal.orzel@xxxxxxx>
---
Changes in v3:
- improve in-code comment
- add reviewed-by
---
 .../build/ubuntu/xenial-xilinx.dockerfile     | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)
 create mode 100644 automation/build/ubuntu/xenial-xilinx.dockerfile

diff --git a/automation/build/ubuntu/xenial-xilinx.dockerfile 
b/automation/build/ubuntu/xenial-xilinx.dockerfile
new file mode 100644
index 0000000000..5f70871352
--- /dev/null
+++ b/automation/build/ubuntu/xenial-xilinx.dockerfile
@@ -0,0 +1,25 @@
+FROM ubuntu:16.04
+LABEL maintainer.name="The Xen Project " \
+      maintainer.email="xen-devel@xxxxxxxxxxxxxxxxxxxx"
+
+ENV DEBIAN_FRONTEND=noninteractive
+ENV USER root
+
+RUN mkdir /build
+WORKDIR /build
+
+# board bringup depends
+RUN apt-get update && \
+    apt-get --quiet --yes install \
+        snmp \
+        snmp-mibs-downloader \
+        u-boot-tools \
+        device-tree-compiler \
+        cpio \
+        git \
+        gzip \
+        file \
+        && \
+        apt-get autoremove -y && \
+        apt-get clean && \
+        rm -rf /var/lib/apt/lists* /tmp/* /var/tmp/*
-- 
2.25.1