[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[XEN v4 05/11] xen/arm: Introduce a wrapper for dt_device_get_address() to handle paddr_t


  • To: <xen-devel@xxxxxxxxxxxxxxxxxxxx>
  • From: Ayan Kumar Halder <ayan.kumar.halder@xxxxxxx>
  • Date: Tue, 21 Mar 2023 14:03:51 +0000
  • Arc-authentication-results: i=1; mx.microsoft.com 1; spf=pass (sender ip is 165.204.84.17) smtp.rcpttodomain=lists.xenproject.org smtp.mailfrom=amd.com; dmarc=pass (p=quarantine sp=quarantine pct=100) action=none header.from=amd.com; dkim=none (message not signed); arc=none
  • Arc-message-signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=P4RP/khVYxFpfabYrxxnK0TXYG+4GHlNXLJPkm8V9rs=; b=Hzt2eubqp1swpkIv6WnEGcAdTpxHMzXY8iswQptp1hGweFk/CMNnCBTV8p+D5CP7F9asaM2dqW8XtD4nEBgBkWb9aZgD4LI/Iw0Ucr0WuBeAsbKu+aY8xakrqQnkjmMOvN+kyKD6zGUgrSdQjdwH7coUu/FqpkAuJBKFe1i/ErDmil3BTCmRdkP6bvTsp75mQt4pF0JO4XPudesmoov2/41+Gum5dpBO8q7/MihOyKS+NUdYWJLzxgZk2yNu2a3HWcb/UsVvxYaHMvus9kBIAnD1eAYalLybqQchlfGaEKYtW8MthlpJndH+UTuBHZ2Wu8hObr3YqmBsCcBq5y7tCQ==
  • Arc-seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=J2FVm2VlfD1TF+Ul4CNvNF2Xks2b8HHe6jC4SZfWmN6+4YUbRahAuUHbZ53kao12RyNga5M/vChdUMW2ZuEytByZbPUSJQdRISZy7cP9shCVzo4K9ru8N2rCoNlz6qMVy3H+Ejr3YFpTsXVMrKclE3jq9GYZ1bnrj8tSAgDpqWzzSo3cUm/aG/qt+7P+TxXsSfzjo6J1AqYWDwz++gc/cuVX3pum0Ue/023rqhYmABTjtSiaSHHMMwxmDTPIOVdXZ57MVa2pVhcElDOLXOAx0AwKW+IcMK45JTFg9V9wdkIbutdK8AciPh9nHxL4ZGOi37PKUOA1JN1rSh1uKBG9hw==
  • Cc: <sstabellini@xxxxxxxxxx>, <stefano.stabellini@xxxxxxx>, <julien@xxxxxxx>, <Volodymyr_Babchuk@xxxxxxxx>, <bertrand.marquis@xxxxxxx>, <andrew.cooper3@xxxxxxxxxx>, <george.dunlap@xxxxxxxxxx>, <jbeulich@xxxxxxxx>, <wl@xxxxxxx>, <rahul.singh@xxxxxxx>, Ayan Kumar Halder <ayan.kumar.halder@xxxxxxx>
  • Delivery-date: Tue, 21 Mar 2023 14:05:32 +0000
  • List-id: Xen developer discussion <xen-devel.lists.xenproject.org>

dt_device_get_address() can accept uint64_t only for address and size.
However, the address/size denotes physical addresses. Thus, they should
be represented by 'paddr_t'.
Consequently, we introduce a wrapper for dt_device_get_address() ie
dt_device_get_paddr() which accepts address/size as paddr_t and inturn
invokes dt_device_get_address() after converting address/size to
uint64_t.

The reason for introducing doing this is that in future 'paddr_t' may
be defined as uint32_t. Thus, we need an explicit wrapper to do the type
conversion and return an error in case of truncation.

With this, callers now invoke dt_device_get_paddr().
dt_device_get_address() is invoked by dt_device_get_paddr() only.

Signed-off-by: Ayan Kumar Halder <ayan.kumar.halder@xxxxxxx>
---
Changes from -

v1 - 1. New patch.

v2 - 1. Extracted part of "[XEN v2 05/11] xen/arm: Use paddr_t instead of u64 
for address/size"
into this patch.

2. dt_device_get_address() callers now invoke dt_device_get_paddr() instead.

3. Logged error in case of truncation.

v3 - 1. Modified the truncation checks as "dt_addr != (paddr_t)dt_addr".
2. Some sanity fixes. 

 xen/arch/arm/domain_build.c                | 10 +++---
 xen/arch/arm/gic-v2.c                      | 10 +++---
 xen/arch/arm/gic-v3-its.c                  |  4 +--
 xen/arch/arm/gic-v3.c                      | 10 +++---
 xen/arch/arm/pci/pci-host-common.c         |  6 ++--
 xen/arch/arm/platforms/brcm-raspberry-pi.c |  2 +-
 xen/arch/arm/platforms/brcm.c              |  4 +--
 xen/arch/arm/platforms/exynos5.c           | 32 ++++++++---------
 xen/arch/arm/platforms/sunxi.c             |  2 +-
 xen/arch/arm/platforms/xgene-storm.c       |  2 +-
 xen/common/device_tree.c                   | 40 ++++++++++++++++++++--
 xen/drivers/char/cadence-uart.c            |  4 +--
 xen/drivers/char/exynos4210-uart.c         |  4 +--
 xen/drivers/char/imx-lpuart.c              |  4 +--
 xen/drivers/char/meson-uart.c              |  4 +--
 xen/drivers/char/mvebu-uart.c              |  4 +--
 xen/drivers/char/ns16550.c                 |  2 +-
 xen/drivers/char/omap-uart.c               |  4 +--
 xen/drivers/char/pl011.c                   |  6 ++--
 xen/drivers/char/scif-uart.c               |  4 +--
 xen/drivers/passthrough/arm/ipmmu-vmsa.c   |  8 ++---
 xen/drivers/passthrough/arm/smmu-v3.c      |  2 +-
 xen/drivers/passthrough/arm/smmu.c         |  8 ++---
 xen/include/xen/device_tree.h              |  6 ++--
 24 files changed, 109 insertions(+), 73 deletions(-)

diff --git a/xen/arch/arm/domain_build.c b/xen/arch/arm/domain_build.c
index 6573d15302..b4ae6a2548 100644
--- a/xen/arch/arm/domain_build.c
+++ b/xen/arch/arm/domain_build.c
@@ -1698,13 +1698,13 @@ static int __init find_memory_holes(const struct 
kernel_info *kinfo,
     dt_for_each_device_node( dt_host, np )
     {
         unsigned int naddr;
-        u64 addr, size;
+        paddr_t addr, size;
 
         naddr = dt_number_of_address(np);
 
         for ( i = 0; i < naddr; i++ )
         {
-            res = dt_device_get_address(np, i, &addr, &size);
+            res = dt_device_get_paddr(np, i, &addr, &size);
             if ( res )
             {
                 printk(XENLOG_ERR "Unable to retrieve address %u for %s\n",
@@ -2478,7 +2478,7 @@ static int __init handle_device(struct domain *d, struct 
dt_device_node *dev,
     unsigned int naddr;
     unsigned int i;
     int res;
-    u64 addr, size;
+    paddr_t addr, size;
     bool own_device = !dt_device_for_passthrough(dev);
     /*
      * We want to avoid mapping the MMIO in dom0 for the following cases:
@@ -2533,7 +2533,7 @@ static int __init handle_device(struct domain *d, struct 
dt_device_node *dev,
     /* Give permission and map MMIOs */
     for ( i = 0; i < naddr; i++ )
     {
-        res = dt_device_get_address(dev, i, &addr, &size);
+        res = dt_device_get_paddr(dev, i, &addr, &size);
         if ( res )
         {
             printk(XENLOG_ERR "Unable to retrieve address %u for %s\n",
@@ -2964,7 +2964,7 @@ static int __init handle_passthrough_prop(struct 
kernel_info *kinfo,
         if ( res )
         {
             printk(XENLOG_ERR "Unable to permit to dom%d access to"
-                   " 0x%"PRIx64" - 0x%"PRIx64"\n",
+                   " 0x%"PRIpaddr" - 0x%"PRIpaddr"\n",
                    kinfo->d->domain_id,
                    mstart & PAGE_MASK, PAGE_ALIGN(mstart + size) - 1);
             return res;
diff --git a/xen/arch/arm/gic-v2.c b/xen/arch/arm/gic-v2.c
index 5d4d298b86..6476ff4230 100644
--- a/xen/arch/arm/gic-v2.c
+++ b/xen/arch/arm/gic-v2.c
@@ -993,7 +993,7 @@ static void gicv2_extension_dt_init(const struct 
dt_device_node *node)
             continue;
 
         /* Get register frame resource from DT. */
-        if ( dt_device_get_address(v2m, 0, &addr, &size) )
+        if ( dt_device_get_paddr(v2m, 0, &addr, &size) )
             panic("GICv2: Cannot find a valid v2m frame address\n");
 
         /*
@@ -1018,19 +1018,19 @@ static void __init gicv2_dt_init(void)
     paddr_t vsize;
     const struct dt_device_node *node = gicv2_info.node;
 
-    res = dt_device_get_address(node, 0, &dbase, NULL);
+    res = dt_device_get_paddr(node, 0, &dbase, NULL);
     if ( res )
         panic("GICv2: Cannot find a valid address for the distributor\n");
 
-    res = dt_device_get_address(node, 1, &cbase, &csize);
+    res = dt_device_get_paddr(node, 1, &cbase, &csize);
     if ( res )
         panic("GICv2: Cannot find a valid address for the CPU\n");
 
-    res = dt_device_get_address(node, 2, &hbase, NULL);
+    res = dt_device_get_paddr(node, 2, &hbase, NULL);
     if ( res )
         panic("GICv2: Cannot find a valid address for the hypervisor\n");
 
-    res = dt_device_get_address(node, 3, &vbase, &vsize);
+    res = dt_device_get_paddr(node, 3, &vbase, &vsize);
     if ( res )
         panic("GICv2: Cannot find a valid address for the virtual CPU\n");
 
diff --git a/xen/arch/arm/gic-v3-its.c b/xen/arch/arm/gic-v3-its.c
index 1ec9934191..3aa4edda10 100644
--- a/xen/arch/arm/gic-v3-its.c
+++ b/xen/arch/arm/gic-v3-its.c
@@ -1004,12 +1004,12 @@ static void gicv3_its_dt_init(const struct 
dt_device_node *node)
      */
     dt_for_each_child_node(node, its)
     {
-        uint64_t addr, size;
+        paddr_t addr, size;
 
         if ( !dt_device_is_compatible(its, "arm,gic-v3-its") )
             continue;
 
-        if ( dt_device_get_address(its, 0, &addr, &size) )
+        if ( dt_device_get_paddr(its, 0, &addr, &size) )
             panic("GICv3: Cannot find a valid ITS frame address\n");
 
         add_to_host_its_list(addr, size, its);
diff --git a/xen/arch/arm/gic-v3.c b/xen/arch/arm/gic-v3.c
index bb59ea94cd..4e6c98bada 100644
--- a/xen/arch/arm/gic-v3.c
+++ b/xen/arch/arm/gic-v3.c
@@ -1377,7 +1377,7 @@ static void __init gicv3_dt_init(void)
     int res, i;
     const struct dt_device_node *node = gicv3_info.node;
 
-    res = dt_device_get_address(node, 0, &dbase, NULL);
+    res = dt_device_get_paddr(node, 0, &dbase, NULL);
     if ( res )
         panic("GICv3: Cannot find a valid distributor address\n");
 
@@ -1393,9 +1393,9 @@ static void __init gicv3_dt_init(void)
 
     for ( i = 0; i < gicv3.rdist_count; i++ )
     {
-        uint64_t rdist_base, rdist_size;
+        paddr_t rdist_base, rdist_size;
 
-        res = dt_device_get_address(node, 1 + i, &rdist_base, &rdist_size);
+        res = dt_device_get_paddr(node, 1 + i, &rdist_base, &rdist_size);
         if ( res )
             panic("GICv3: No rdist base found for region %d\n", i);
 
@@ -1417,10 +1417,10 @@ static void __init gicv3_dt_init(void)
      * For GICv3 supporting GICv2, GICC and GICV base address will be
      * provided.
      */
-    res = dt_device_get_address(node, 1 + gicv3.rdist_count,
+    res = dt_device_get_paddr(node, 1 + gicv3.rdist_count,
                                 &cbase, &csize);
     if ( !res )
-        dt_device_get_address(node, 1 + gicv3.rdist_count + 2,
+        dt_device_get_paddr(node, 1 + gicv3.rdist_count + 2,
                               &vbase, &vsize);
 }
 
diff --git a/xen/arch/arm/pci/pci-host-common.c 
b/xen/arch/arm/pci/pci-host-common.c
index a8ece94303..5550f9478d 100644
--- a/xen/arch/arm/pci/pci-host-common.c
+++ b/xen/arch/arm/pci/pci-host-common.c
@@ -93,7 +93,7 @@ gen_pci_init(struct dt_device_node *dev, const struct 
pci_ecam_ops *ops)
         cfg_reg_idx = 0;
 
     /* Parse our PCI ecam register address */
-    err = dt_device_get_address(dev, cfg_reg_idx, &addr, &size);
+    err = dt_device_get_paddr(dev, cfg_reg_idx, &addr, &size);
     if ( err )
         goto err_exit;
 
@@ -349,10 +349,10 @@ int __init pci_host_bridge_mappings(struct domain *d)
 
         for ( i = 0; i < dt_number_of_address(dev); i++ )
         {
-            uint64_t addr, size;
+            paddr_t addr, size;
             int err;
 
-            err = dt_device_get_address(dev, i, &addr, &size);
+            err = dt_device_get_paddr(dev, i, &addr, &size);
             if ( err )
             {
                 printk(XENLOG_ERR
diff --git a/xen/arch/arm/platforms/brcm-raspberry-pi.c 
b/xen/arch/arm/platforms/brcm-raspberry-pi.c
index 811b40b1a6..407ec07f63 100644
--- a/xen/arch/arm/platforms/brcm-raspberry-pi.c
+++ b/xen/arch/arm/platforms/brcm-raspberry-pi.c
@@ -64,7 +64,7 @@ static void __iomem *rpi4_map_watchdog(void)
     if ( !node )
         return NULL;
 
-    ret = dt_device_get_address(node, 0, &start, &len);
+    ret = dt_device_get_paddr(node, 0, &start, &len);
     if ( ret )
     {
         printk("Cannot read watchdog register address\n");
diff --git a/xen/arch/arm/platforms/brcm.c b/xen/arch/arm/platforms/brcm.c
index d481b2c60f..4310feee73 100644
--- a/xen/arch/arm/platforms/brcm.c
+++ b/xen/arch/arm/platforms/brcm.c
@@ -40,7 +40,7 @@ static __init int brcm_get_dt_node(char *compat_str,
                                    u32 *reg_base)
 {
     const struct dt_device_node *node;
-    u64 reg_base_64;
+    paddr_t reg_base_64;
     int rc;
 
     node = dt_find_compatible_node(NULL, NULL, compat_str);
@@ -50,7 +50,7 @@ static __init int brcm_get_dt_node(char *compat_str,
         return -ENOENT;
     }
 
-    rc = dt_device_get_address(node, 0, &reg_base_64, NULL);
+    rc = dt_device_get_paddr(node, 0, &reg_base_64, NULL);
     if ( rc )
     {
         dprintk(XENLOG_ERR, "%s: missing \"reg\" prop\n", __func__);
diff --git a/xen/arch/arm/platforms/exynos5.c b/xen/arch/arm/platforms/exynos5.c
index 6560507092..c48093cd4f 100644
--- a/xen/arch/arm/platforms/exynos5.c
+++ b/xen/arch/arm/platforms/exynos5.c
@@ -42,8 +42,8 @@ static int exynos5_init_time(void)
     void __iomem *mct;
     int rc;
     struct dt_device_node *node;
-    u64 mct_base_addr;
-    u64 size;
+    paddr_t mct_base_addr;
+    paddr_t size;
 
     node = dt_find_compatible_node(NULL, NULL, "samsung,exynos4210-mct");
     if ( !node )
@@ -52,14 +52,14 @@ static int exynos5_init_time(void)
         return -ENXIO;
     }
 
-    rc = dt_device_get_address(node, 0, &mct_base_addr, &size);
+    rc = dt_device_get_paddr(node, 0, &mct_base_addr, &size);
     if ( rc )
     {
         dprintk(XENLOG_ERR, "Error in \"samsung,exynos4210-mct\"\n");
         return -ENXIO;
     }
 
-    dprintk(XENLOG_INFO, "mct_base_addr: %016llx size: %016llx\n",
+    dprintk(XENLOG_INFO, "mct_base_addr: 0x%"PRIpaddr" size: 0x%"PRIpaddr"\n",
             mct_base_addr, size);
 
     mct = ioremap_nocache(mct_base_addr, size);
@@ -97,9 +97,9 @@ static int __init exynos5_smp_init(void)
     struct dt_device_node *node;
     void __iomem *sysram;
     char *compatible;
-    u64 sysram_addr;
-    u64 size;
-    u64 sysram_offset;
+    paddr_t sysram_addr;
+    paddr_t size;
+    paddr_t sysram_offset;
     int rc;
 
     node = dt_find_compatible_node(NULL, NULL, "samsung,secure-firmware");
@@ -125,13 +125,13 @@ static int __init exynos5_smp_init(void)
         return -ENXIO;
     }
 
-    rc = dt_device_get_address(node, 0, &sysram_addr, &size);
+    rc = dt_device_get_paddr(node, 0, &sysram_addr, &size);
     if ( rc )
     {
         dprintk(XENLOG_ERR, "Error in %s\n", compatible);
         return -ENXIO;
     }
-    dprintk(XENLOG_INFO, "sysram_addr: %016llx size: %016llx offset: 
%016llx\n",
+    dprintk(XENLOG_INFO,"sysram_addr: 0x%"PRIpaddr" size: 0x%"PRIpaddr"offset: 
0x%"PRIpaddr"\n",
             sysram_addr, size, sysram_offset);
 
     sysram = ioremap_nocache(sysram_addr, size);
@@ -189,7 +189,7 @@ static int exynos5_cpu_power_up(void __iomem *power, int 
cpu)
     return 0;
 }
 
-static int exynos5_get_pmu_baseandsize(u64 *power_base_addr, u64 *size)
+static int exynos5_get_pmu_baseandsize(paddr_t *power_base_addr, paddr_t *size)
 {
     struct dt_device_node *node;
     int rc;
@@ -208,14 +208,14 @@ static int exynos5_get_pmu_baseandsize(u64 
*power_base_addr, u64 *size)
         return -ENXIO;
     }
 
-    rc = dt_device_get_address(node, 0, power_base_addr, size);
+    rc = dt_device_get_paddr(node, 0, power_base_addr, size);
     if ( rc )
     {
         dprintk(XENLOG_ERR, "Error in \"samsung,exynos5XXX-pmu\"\n");
         return -ENXIO;
     }
 
-    dprintk(XENLOG_DEBUG, "power_base_addr: %016llx size: %016llx\n",
+    dprintk(XENLOG_DEBUG, "power_base_addr: 0x%"PRIpaddr" size: 
0x%"PRIpaddr"\n",
             *power_base_addr, *size);
 
     return 0;
@@ -223,8 +223,8 @@ static int exynos5_get_pmu_baseandsize(u64 
*power_base_addr, u64 *size)
 
 static int exynos5_cpu_up(int cpu)
 {
-    u64 power_base_addr;
-    u64 size;
+    paddr_t power_base_addr;
+    paddr_t size;
     void __iomem *power;
     int rc;
 
@@ -256,8 +256,8 @@ static int exynos5_cpu_up(int cpu)
 
 static void exynos5_reset(void)
 {
-    u64 power_base_addr;
-    u64 size;
+    paddr_t power_base_addr;
+    paddr_t size;
     void __iomem *pmu;
     int rc;
 
diff --git a/xen/arch/arm/platforms/sunxi.c b/xen/arch/arm/platforms/sunxi.c
index e8e4d88bef..2b2c215f20 100644
--- a/xen/arch/arm/platforms/sunxi.c
+++ b/xen/arch/arm/platforms/sunxi.c
@@ -50,7 +50,7 @@ static void __iomem *sunxi_map_watchdog(bool *new_wdt)
         return NULL;
     }
 
-    ret = dt_device_get_address(node, 0, &wdt_start, &wdt_len);
+    ret = dt_device_get_paddr(node, 0, &wdt_start, &wdt_len);
     if ( ret )
     {
         dprintk(XENLOG_ERR, "Cannot read watchdog register address\n");
diff --git a/xen/arch/arm/platforms/xgene-storm.c 
b/xen/arch/arm/platforms/xgene-storm.c
index befd0c3c2d..6fc2f9679e 100644
--- a/xen/arch/arm/platforms/xgene-storm.c
+++ b/xen/arch/arm/platforms/xgene-storm.c
@@ -50,7 +50,7 @@ static void __init xgene_check_pirq_eoi(void)
     if ( !node )
         panic("%s: Can not find interrupt controller node\n", __func__);
 
-    res = dt_device_get_address(node, 0, &dbase, NULL);
+    res = dt_device_get_paddr(node, 0, &dbase, NULL);
     if ( res )
         panic("%s: Cannot find a valid address for the distributor\n", 
__func__);
 
diff --git a/xen/common/device_tree.c b/xen/common/device_tree.c
index 6c9712ab7b..0d2922ad85 100644
--- a/xen/common/device_tree.c
+++ b/xen/common/device_tree.c
@@ -934,8 +934,9 @@ bail:
 }
 
 /* dt_device_address - Translate device tree address and return it */
-int dt_device_get_address(const struct dt_device_node *dev, unsigned int index,
-                          u64 *addr, u64 *size)
+static int dt_device_get_address(const struct dt_device_node *dev,
+                                 unsigned int index,
+                                 u64 *addr, u64 *size)
 {
     const __be32 *addrp;
     unsigned int flags;
@@ -955,6 +956,41 @@ int dt_device_get_address(const struct dt_device_node 
*dev, unsigned int index,
     return 0;
 }
 
+int dt_device_get_paddr(const struct dt_device_node *dev, unsigned int index,
+                        paddr_t *addr, paddr_t *size)
+{
+    uint64_t dt_addr = 0, dt_size = 0;
+    int ret;
+
+    ret = dt_device_get_address(dev, index, &dt_addr, &dt_size);
+    if ( ret )
+        return ret;
+
+    if ( addr )
+    {
+        if ( dt_addr != (paddr_t)dt_addr )
+        {
+            printk("Error: Physical address 0x%"PRIx64" for node=%s is greater 
than max width (%zu bytes) supported\n",
+                   dt_addr, dev->name, sizeof(paddr_t));
+            return -ERANGE;
+        }
+
+        *addr = dt_addr;
+    }
+
+    if ( size )
+    {
+        if ( dt_size != (paddr_t)dt_size )
+        {
+            printk("Error: Physical size 0x%"PRIx64" for node=%s is greater 
than max width (%zu bytes) supported\n",
+                   dt_size, dev->name, sizeof(paddr_t));
+            return -ERANGE;
+        }
+        *size = dt_size;
+    }
+
+    return ret;
+}
 
 int dt_for_each_range(const struct dt_device_node *dev,
                       int (*cb)(const struct dt_device_node *,
diff --git a/xen/drivers/char/cadence-uart.c b/xen/drivers/char/cadence-uart.c
index 22905ba66c..c38d7ed143 100644
--- a/xen/drivers/char/cadence-uart.c
+++ b/xen/drivers/char/cadence-uart.c
@@ -158,14 +158,14 @@ static int __init cuart_init(struct dt_device_node *dev, 
const void *data)
     const char *config = data;
     struct cuart *uart;
     int res;
-    u64 addr, size;
+    paddr_t addr, size;
 
     if ( strcmp(config, "") )
         printk("WARNING: UART configuration is not supported\n");
 
     uart = &cuart_com;
 
-    res = dt_device_get_address(dev, 0, &addr, &size);
+    res = dt_device_get_paddr(dev, 0, &addr, &size);
     if ( res )
     {
         printk("cadence: Unable to retrieve the base"
diff --git a/xen/drivers/char/exynos4210-uart.c 
b/xen/drivers/char/exynos4210-uart.c
index 43aaf02e18..2503392ccd 100644
--- a/xen/drivers/char/exynos4210-uart.c
+++ b/xen/drivers/char/exynos4210-uart.c
@@ -303,7 +303,7 @@ static int __init exynos4210_uart_init(struct 
dt_device_node *dev,
     const char *config = data;
     struct exynos4210_uart *uart;
     int res;
-    u64 addr, size;
+    paddr_t addr, size;
 
     if ( strcmp(config, "") )
         printk("WARNING: UART configuration is not supported\n");
@@ -316,7 +316,7 @@ static int __init exynos4210_uart_init(struct 
dt_device_node *dev,
     uart->parity    = PARITY_NONE;
     uart->stop_bits = 1;
 
-    res = dt_device_get_address(dev, 0, &addr, &size);
+    res = dt_device_get_paddr(dev, 0, &addr, &size);
     if ( res )
     {
         printk("exynos4210: Unable to retrieve the base"
diff --git a/xen/drivers/char/imx-lpuart.c b/xen/drivers/char/imx-lpuart.c
index 9c1f3b71a3..77f70c2719 100644
--- a/xen/drivers/char/imx-lpuart.c
+++ b/xen/drivers/char/imx-lpuart.c
@@ -204,7 +204,7 @@ static int __init imx_lpuart_init(struct dt_device_node 
*dev,
     const char *config = data;
     struct imx_lpuart *uart;
     int res;
-    u64 addr, size;
+    paddr_t addr, size;
 
     if ( strcmp(config, "") )
         printk("WARNING: UART configuration is not supported\n");
@@ -216,7 +216,7 @@ static int __init imx_lpuart_init(struct dt_device_node 
*dev,
     uart->parity = 0;
     uart->stop_bits = 1;
 
-    res = dt_device_get_address(dev, 0, &addr, &size);
+    res = dt_device_get_paddr(dev, 0, &addr, &size);
     if ( res )
     {
         printk("imx8-lpuart: Unable to retrieve the base"
diff --git a/xen/drivers/char/meson-uart.c b/xen/drivers/char/meson-uart.c
index b1e25e0468..c627328122 100644
--- a/xen/drivers/char/meson-uart.c
+++ b/xen/drivers/char/meson-uart.c
@@ -209,14 +209,14 @@ static int __init meson_uart_init(struct dt_device_node 
*dev, const void *data)
     const char *config = data;
     struct meson_uart *uart;
     int res;
-    u64 addr, size;
+    paddr_t addr, size;
 
     if ( strcmp(config, "") )
         printk("WARNING: UART configuration is not supported\n");
 
     uart = &meson_com;
 
-    res = dt_device_get_address(dev, 0, &addr, &size);
+    res = dt_device_get_paddr(dev, 0, &addr, &size);
     if ( res )
     {
         printk("meson: Unable to retrieve the base address of the UART\n");
diff --git a/xen/drivers/char/mvebu-uart.c b/xen/drivers/char/mvebu-uart.c
index a00618b96f..cc55173513 100644
--- a/xen/drivers/char/mvebu-uart.c
+++ b/xen/drivers/char/mvebu-uart.c
@@ -231,14 +231,14 @@ static int __init mvebu_uart_init(struct dt_device_node 
*dev, const void *data)
     const char *config = data;
     struct mvebu3700_uart *uart;
     int res;
-    u64 addr, size;
+    paddr_t addr, size;
 
     if ( strcmp(config, "") )
         printk("WARNING: UART configuration is not supported\n");
 
     uart = &mvebu3700_com;
 
-    res = dt_device_get_address(dev, 0, &addr, &size);
+    res = dt_device_get_paddr(dev, 0, &addr, &size);
     if ( res )
     {
         printk("mvebu3700: Unable to retrieve the base address of the UART\n");
diff --git a/xen/drivers/char/ns16550.c b/xen/drivers/char/ns16550.c
index 2e8a9cfb24..732c1e5c71 100644
--- a/xen/drivers/char/ns16550.c
+++ b/xen/drivers/char/ns16550.c
@@ -1772,7 +1772,7 @@ static int __init ns16550_uart_dt_init(struct 
dt_device_node *dev,
     uart->parity    = UART_PARITY_NONE;
     uart->stop_bits = 1;
 
-    res = dt_device_get_address(dev, 0, &uart->io_base, &uart->io_size);
+    res = dt_device_get_paddr(dev, 0, &uart->io_base, &uart->io_size);
     if ( res )
         return res;
 
diff --git a/xen/drivers/char/omap-uart.c b/xen/drivers/char/omap-uart.c
index d6a5d59aa2..8e643cb039 100644
--- a/xen/drivers/char/omap-uart.c
+++ b/xen/drivers/char/omap-uart.c
@@ -324,7 +324,7 @@ static int __init omap_uart_init(struct dt_device_node *dev,
     struct omap_uart *uart;
     u32 clkspec;
     int res;
-    u64 addr, size;
+    paddr_t addr, size;
 
     if ( strcmp(config, "") )
         printk("WARNING: UART configuration is not supported\n");
@@ -344,7 +344,7 @@ static int __init omap_uart_init(struct dt_device_node *dev,
     uart->parity = UART_PARITY_NONE;
     uart->stop_bits = 1;
 
-    res = dt_device_get_address(dev, 0, &addr, &size);
+    res = dt_device_get_paddr(dev, 0, &addr, &size);
     if ( res )
     {
         printk("omap-uart: Unable to retrieve the base"
diff --git a/xen/drivers/char/pl011.c b/xen/drivers/char/pl011.c
index be67242bc0..052a651251 100644
--- a/xen/drivers/char/pl011.c
+++ b/xen/drivers/char/pl011.c
@@ -222,7 +222,7 @@ static struct uart_driver __read_mostly pl011_driver = {
     .vuart_info   = pl011_vuart,
 };
 
-static int __init pl011_uart_init(int irq, u64 addr, u64 size, bool sbsa)
+static int __init pl011_uart_init(int irq, paddr_t addr, paddr_t size, bool 
sbsa)
 {
     struct pl011 *uart;
 
@@ -258,14 +258,14 @@ static int __init pl011_dt_uart_init(struct 
dt_device_node *dev,
 {
     const char *config = data;
     int res;
-    u64 addr, size;
+    paddr_t addr, size;
 
     if ( strcmp(config, "") )
     {
         printk("WARNING: UART configuration is not supported\n");
     }
 
-    res = dt_device_get_address(dev, 0, &addr, &size);
+    res = dt_device_get_paddr(dev, 0, &addr, &size);
     if ( res )
     {
         printk("pl011: Unable to retrieve the base"
diff --git a/xen/drivers/char/scif-uart.c b/xen/drivers/char/scif-uart.c
index 2fccafe340..1b28ba90e9 100644
--- a/xen/drivers/char/scif-uart.c
+++ b/xen/drivers/char/scif-uart.c
@@ -311,14 +311,14 @@ static int __init scif_uart_init(struct dt_device_node 
*dev,
     const char *config = data;
     struct scif_uart *uart;
     int res;
-    u64 addr, size;
+    paddr_t addr, size;
 
     if ( strcmp(config, "") )
         printk("WARNING: UART configuration is not supported\n");
 
     uart = &scif_com;
 
-    res = dt_device_get_address(dev, 0, &addr, &size);
+    res = dt_device_get_paddr(dev, 0, &addr, &size);
     if ( res )
     {
         printk("scif-uart: Unable to retrieve the base"
diff --git a/xen/drivers/passthrough/arm/ipmmu-vmsa.c 
b/xen/drivers/passthrough/arm/ipmmu-vmsa.c
index 091f09b217..611d9eeba5 100644
--- a/xen/drivers/passthrough/arm/ipmmu-vmsa.c
+++ b/xen/drivers/passthrough/arm/ipmmu-vmsa.c
@@ -794,7 +794,7 @@ static void ipmmu_device_reset(struct ipmmu_vmsa_device 
*mmu)
 static __init bool ipmmu_stage2_supported(void)
 {
     struct dt_device_node *np;
-    uint64_t addr, size;
+    paddr_t addr, size;
     void __iomem *base;
     uint32_t product, cut;
     bool stage2_supported = false;
@@ -806,7 +806,7 @@ static __init bool ipmmu_stage2_supported(void)
         return false;
     }
 
-    if ( dt_device_get_address(np, 0, &addr, &size) )
+    if ( dt_device_get_paddr(np, 0, &addr, &size) )
     {
         printk(XENLOG_ERR "ipmmu: Failed to get PRR MMIO\n");
         return false;
@@ -884,7 +884,7 @@ static int ipmmu_probe(struct dt_device_node *node)
 {
     const struct dt_device_match *match;
     struct ipmmu_vmsa_device *mmu;
-    uint64_t addr, size;
+    paddr_t addr, size;
     uint32_t reg;
     int irq, ret;
 
@@ -905,7 +905,7 @@ static int ipmmu_probe(struct dt_device_node *node)
     bitmap_zero(mmu->ctx, IPMMU_CTX_MAX);
 
     /* Map I/O memory and request IRQ. */
-    ret = dt_device_get_address(node, 0, &addr, &size);
+    ret = dt_device_get_paddr(node, 0, &addr, &size);
     if ( ret )
     {
         dev_err(&node->dev, "Failed to get MMIO\n");
diff --git a/xen/drivers/passthrough/arm/smmu-v3.c 
b/xen/drivers/passthrough/arm/smmu-v3.c
index bfdb62b395..b7fa2e90f7 100644
--- a/xen/drivers/passthrough/arm/smmu-v3.c
+++ b/xen/drivers/passthrough/arm/smmu-v3.c
@@ -2428,7 +2428,7 @@ static int arm_smmu_device_probe(struct platform_device 
*pdev)
        }
 
        /* Base address */
-       ret = dt_device_get_address(np, 0, &ioaddr, &iosize);
+       ret = dt_device_get_paddr(np, 0, &ioaddr, &iosize);
        if (ret)
                goto out_free_smmu;
 
diff --git a/xen/drivers/passthrough/arm/smmu.c 
b/xen/drivers/passthrough/arm/smmu.c
index 0a514821b3..79281075ba 100644
--- a/xen/drivers/passthrough/arm/smmu.c
+++ b/xen/drivers/passthrough/arm/smmu.c
@@ -73,8 +73,8 @@
 /* Xen: Helpers to get device MMIO and IRQs */
 struct resource
 {
-       u64 addr;
-       u64 size;
+       paddr_t addr;
+       paddr_t size;
        unsigned int type;
 };
 
@@ -101,7 +101,7 @@ static struct resource *platform_get_resource(struct 
platform_device *pdev,
 
        switch (type) {
        case IORESOURCE_MEM:
-               ret = dt_device_get_address(pdev, num, &res.addr, &res.size);
+               ret = dt_device_get_paddr(pdev, num, &res.addr, &res.size);
 
                return ((ret) ? NULL : &res);
 
@@ -169,7 +169,7 @@ static void __iomem *devm_ioremap_resource(struct device 
*dev,
        ptr = ioremap_nocache(res->addr, res->size);
        if (!ptr) {
                dev_err(dev,
-                       "ioremap failed (addr 0x%"PRIx64" size 0x%"PRIx64")\n",
+                       "ioremap failed (addr 0x%"PRIpaddr" size 
0x%"PRIpaddr")\n",
                        res->addr, res->size);
                return ERR_PTR(-ENOMEM);
        }
diff --git a/xen/include/xen/device_tree.h b/xen/include/xen/device_tree.h
index bbc7d7377a..d72dc7c788 100644
--- a/xen/include/xen/device_tree.h
+++ b/xen/include/xen/device_tree.h
@@ -580,7 +580,7 @@ int dt_find_node_by_gpath(XEN_GUEST_HANDLE(char) u_path, 
uint32_t u_plen,
 const struct dt_device_node *dt_get_parent(const struct dt_device_node *node);
 
 /**
- * dt_device_get_address - Resolve an address for a device
+ * dt_device_get_paddr - Resolve an address for a device
  * @device: the device whose address is to be resolved
  * @index: index of the address to resolve
  * @addr: address filled by this function
@@ -589,8 +589,8 @@ const struct dt_device_node *dt_get_parent(const struct 
dt_device_node *node);
  * This function resolves an address, walking the tree, for a give
  * device-tree node. It returns 0 on success.
  */
-int dt_device_get_address(const struct dt_device_node *dev, unsigned int index,
-                          u64 *addr, u64 *size);
+int dt_device_get_paddr(const struct dt_device_node *dev, unsigned int index,
+                        paddr_t *addr, paddr_t *size);
 
 /**
  * dt_number_of_irq - Get the number of IRQ for a device
-- 
2.17.1




 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.