Re: [PATCH 5/6] automation: PCI passthrough tests on ADL hw

[Marek Marczykowski-Górecki <marmarek@xxxxxxxxxxxxxxxxxxxxxx>]

On Mon, Apr 24, 2023 at 08:01:46PM -0700, Stefano Stabellini wrote:
> On Mon, 24 Apr 2023, Marek Marczykowski-Górecki wrote:
> > Add simple PCI passthrough test to both PV and HVM domU. It passes
> > through a network adapter (the only one in the system), gets an IP via
> > DHCP (first basic test) and then ping the gateway (second basic test).
> > Finally, if device is supposed to use MSI or MSI-X (as set in the
> > PCIDEV_INTR test variable), check if it's in use via /proc/interrupts.
> > 
> > On the current runner, the device in question is this:
> > 03:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller 
> > I225-V [8086:15f3] (rev 03)
> >     Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7d25]
> >     Flags: bus master, fast devsel, latency 0, IRQ 18
> >     Memory at 50400000 (32-bit, non-prefetchable) [size=1M]
> >     Memory at 50500000 (32-bit, non-prefetchable) [size=16K]
> >     Capabilities: [40] Power Management version 3
> >     Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
> >     Capabilities: [70] MSI-X: Enable+ Count=5 Masked-
> >     Capabilities: [a0] Express Endpoint, MSI 00
> >     Capabilities: [100] Advanced Error Reporting
> >     Capabilities: [140] Device Serial Number ...
> >     Capabilities: [1c0] Latency Tolerance Reporting
> >     Capabilities: [1f0] Precision Time Measurement
> >     Capabilities: [1e0] L1 PM Substates
> >     Kernel driver in use: igc
> >     Kernel modules: igc
> > 
> > With the current Xen version, it uses MSI-X under PV and MSI under HVM.
> > 
> > This patch moves domU config to a variable, to make it configurable on
> > per-test basis. Add also a few comments for visual separation of tests.
> > 
> > Signed-off-by: Marek Marczykowski-Górecki <marmarek@xxxxxxxxxxxxxxxxxxxxxx>
> > ---
> >  automation/gitlab-ci/test.yaml     | 20 ++++++++-
> >  automation/scripts/qubes-x86-64.sh | 80 ++++++++++++++++++++++++++-----
> >  2 files changed, 89 insertions(+), 11 deletions(-)
> > 
> > diff --git a/automation/gitlab-ci/test.yaml b/automation/gitlab-ci/test.yaml
> > index d68c584269dd..1ce083e6cd88 100644
> > --- a/automation/gitlab-ci/test.yaml
> > +++ b/automation/gitlab-ci/test.yaml
> > @@ -94,6 +94,8 @@
> >      # the test controller runs on RPi4
> >      CONTAINER: alpine:3.12-arm64v8
> >      LOGFILE: smoke-test.log
> > +    PCIDEV: "03:00.0"
> > +    PCIDEV_INTR: "MSI-X"
> 
> This is minor but I would move PCIDEV_INTR to
> adl-pci-pv-x86-64-gcc-debug given that adl-pci-hvm-x86-64-gcc-debug
> already redefines it.

The device is MSI-X capable and I'd expect Linux should use MSI-X. My
guess is it's using MSI in HVM because MSI-X doesn't work (and I hope my
other series will fix that), but I have _not_ verified this theory.
If I'm right, I hope the PCIDEV_INTR="MSI" will go away from the HVM
test, and it will be testing if MSI-X didn't regressed.

> I would also move PCIDEV to adl-pci-pv-x86-64-gcc-debug and
> adl-pci-hvm-x86-64-gcc-debug, but I am fine either way.

My idea is those both are more of a test target properties, not an
individual test properties.


> However the two new tests failed for me:
> 
> https://gitlab.com/xen-project/people/sstabellini/xen/-/pipelines/847157948
> 
> 
> + grep '^Welcome to Alpine Linux' smoke.serial
> + '[' 0 -le 0 ]
> + '[' 0 -le 0 ]
> + echo 'ERROR: test timeout, aborting'
> ERROR: test timeout, aborting
> 
> The Welcome to Alpine Linux message is missing

Ah, I forgot to remove debug shell...

I'll post v2 once it passes test run (waiting in the queue...).
-- 
Best Regards,
Marek Marczykowski-Górecki
Invisible Things Lab

Attachment: signature.asc
Description: PGP signature