[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [PATCH v2 5/6] automation: PCI passthrough tests on ADL hw
Add simple PCI passthrough test to both PV and HVM domU. It passes through a network adapter (the only one in the system), gets an IP via DHCP (first basic test) and then ping the gateway (second basic test). Finally, if device is supposed to use MSI or MSI-X (as set in the PCIDEV_INTR test variable), check if it's in use via /proc/interrupts. On the current runner, the device in question is this: 03:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller I225-V [8086:15f3] (rev 03) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7d25] Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at 50400000 (32-bit, non-prefetchable) [size=1M] Memory at 50500000 (32-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [70] MSI-X: Enable+ Count=5 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ... Capabilities: [1c0] Latency Tolerance Reporting Capabilities: [1f0] Precision Time Measurement Capabilities: [1e0] L1 PM Substates Kernel driver in use: igc Kernel modules: igc With the current Xen version, it uses MSI-X under PV and MSI under HVM. This patch moves domU config to a variable, to make it configurable on per-test basis. Add also a few comments for visual separation of tests. Signed-off-by: Marek Marczykowski-Górecki <marmarek@xxxxxxxxxxxxxxxxxxxxxx> --- changes in v2: - drop leftover debug shell - fix regex -msi to not match -msi-x - fix waiting for domU startup --- automation/gitlab-ci/test.yaml | 20 +++++++- automation/scripts/qubes-x86-64.sh | 85 ++++++++++++++++++++++++++----- 2 files changed, 93 insertions(+), 12 deletions(-) diff --git a/automation/gitlab-ci/test.yaml b/automation/gitlab-ci/test.yaml index d68c584269dd..1ce083e6cd88 100644 --- a/automation/gitlab-ci/test.yaml +++ b/automation/gitlab-ci/test.yaml @@ -94,6 +94,8 @@ # the test controller runs on RPi4 CONTAINER: alpine:3.12-arm64v8 LOGFILE: smoke-test.log + PCIDEV: "03:00.0" + PCIDEV_INTR: "MSI-X" artifacts: paths: - smoke.serial @@ -147,6 +149,24 @@ adl-suspend-x86-64-gcc-debug: - *x86-64-test-needs - alpine-3.12-gcc-debug +adl-pci-pv-x86-64-gcc-debug: + extends: .adl-x86-64 + script: + - ./automation/scripts/qubes-x86-64.sh pci-pv 2>&1 | tee ${LOGFILE} + needs: + - *x86-64-test-needs + - alpine-3.12-gcc-debug + +adl-pci-hvm-x86-64-gcc-debug: + extends: .adl-x86-64 + variables: + PCIDEV_INTR: "MSI" + script: + - ./automation/scripts/qubes-x86-64.sh pci-hvm 2>&1 | tee ${LOGFILE} + needs: + - *x86-64-test-needs + - alpine-3.12-gcc-debug + qemu-smoke-dom0-arm64-gcc: extends: .qemu-arm64 script: diff --git a/automation/scripts/qubes-x86-64.sh b/automation/scripts/qubes-x86-64.sh index 6c0309704661..a01c571860ee 100755 --- a/automation/scripts/qubes-x86-64.sh +++ b/automation/scripts/qubes-x86-64.sh @@ -4,8 +4,21 @@ set -ex test_variant=$1 +### defaults wait_and_wakeup= timeout=120 +domU_config=' +type = "pvh" +name = "domU" +kernel = "/boot/vmlinuz" +ramdisk = "/boot/initrd-domU" +extra = "root=/dev/ram0 console=hvc0" +memory = 512 +vif = [ "bridge=xenbr0", ] +disk = [ ] +' + +### test: smoke test if [ -z "${test_variant}" ]; then passed="ping test passed" domU_check=" @@ -23,6 +36,8 @@ done tail -n 100 /var/log/xen/console/guest-domU.log echo \"${passed}\" " + +### test: S3 elif [ "${test_variant}" = "s3" ]; then passed="suspend test passed" wait_and_wakeup="started, suspending" @@ -48,6 +63,62 @@ xl dmesg | grep 'Finishing wakeup from ACPI S3 state' || exit 1 ping -c 10 192.168.0.2 || exit 1 echo \"${passed}\" " + +### test: pci-pv, pci-hvm +elif [ "${test_variant}" = "pci-pv" ] || [ "${test_variant}" = "pci-hvm" ]; then + + if [ -z "$PCIDEV" ]; then + echo "Please set 'PCIDEV' variable with BDF of test network adapter" >&2 + echo "Optionally set also 'PCIDEV_INTR' to 'MSI' or 'MSI-X'" >&2 + exit 1 + fi + + passed="pci test passed" + + domU_config=' +type = "'${test_variant#pci-}'" +name = "domU" +kernel = "/boot/vmlinuz" +ramdisk = "/boot/initrd-domU" +extra = "root=/dev/ram0 console=hvc0" +memory = 512 +vif = [ ] +disk = [ ] +pci = [ "'$PCIDEV',seize=1" ] +on_reboot = "destroy" +' + + domU_check=" +set -x -e +ip link set eth0 up +timeout 30s udhcpc -i eth0 +pingip=\$(ip -o -4 r show default|cut -f 3 -d ' ') +ping -c 10 \"\$pingip\" +echo domU started +cat /proc/interrupts +" + if [ "$PCIDEV_INTR" = "MSI-X" ]; then + domU_check="$domU_check +grep -- '\\(-msi-x\\|PCI-MSI-X\\).*eth0' /proc/interrupts +" + elif [ "$PCIDEV_INTR" = "MSI" ]; then + # depending on the kernel version and domain type, the MSI can be + # marked as '-msi', 'PCI-MSI', or 'PCI-MSI-<SBDF>'; be careful to not match + # -msi-x nor PCI-MSI-X + domU_check="$domU_check +grep -- '\\(-msi \\|PCI-MSI\\( \\|-[^X]\\)\\).*eth0' /proc/interrupts +" + fi + domU_check="$domU_check +echo \"${passed}\" +" + + dom0_check=" +until grep -q \"^domU Welcome to Alpine Linux\" /var/log/xen/console/guest-domU.log; do + sleep 1 +done +tail -n 100 /var/log/xen/console/guest-domU.log +" fi # DomU @@ -63,7 +134,7 @@ rm var/run echo "#!/bin/sh ${domU_check} -/bin/sh" > etc/local.d/xen.start +" > etc/local.d/xen.start chmod +x etc/local.d/xen.start echo "rc_verbose=yes" >> etc/rc.conf sed -i -e 's/^Welcome/domU \0/' etc/issue @@ -98,17 +169,7 @@ xl create /etc/xen/domU.cfg ${dom0_check} " > etc/local.d/xen.start chmod +x etc/local.d/xen.start -# just PVH for now -echo ' -type = "pvh" -name = "domU" -kernel = "/boot/vmlinuz" -ramdisk = "/boot/initrd-domU" -extra = "root=/dev/ram0 console=hvc0" -memory = 512 -vif = [ "bridge=xenbr0", ] -disk = [ ] -' > etc/xen/domU.cfg +echo "$domU_config" > etc/xen/domU.cfg echo "rc_verbose=yes" >> etc/rc.conf echo "XENCONSOLED_TRACE=all" >> etc/default/xencommons -- git-series 0.9.1
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |