[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [XEN v8 1/5] xen/arm: p2m: Use the pa_range_info table to support ARM_32 and ARM_64
Restructure the code so that one can use pa_range_info[] table for both ARM_32 as well as ARM_64. Also, removed the hardcoding for P2M_ROOT_ORDER and P2M_ROOT_LEVEL as p2m_root_order can be obtained from the pa_range_info[].root_order and p2m_root_level can be obtained from pa_range_info[].sl0. Refer ARM DDI 0406C.d ID040418, B3-1345, "Use of concatenated first-level translation tables ...However, a 40-bit input address range with a translation granularity of 4KB requires a total of 28 bits of address resolution. Therefore, a stage 2 translation that supports a 40-bit input address range requires two concatenated first-level translation tables,..." Thus, root-order is 1 for 40-bit IPA on ARM_32. Refer ARM DDI 0406C.d ID040418, B3-1348, "Determining the required first lookup level for stage 2 translations For a stage 2 translation, the output address range from the stage 1 translations determines the required input address range for the stage 2 translation. The permitted values of VTCR.SL0 are: 0b00 Stage 2 translation lookup must start at the second level. 0b01 Stage 2 translation lookup must start at the first level. VTCR.T0SZ must indicate the required input address range. The size of the input address region is 2^(32-T0SZ) bytes." Thus VTCR.SL0 = 1 (maximum value) and VTCR.T0SZ = -8 when the size of input address region is 2^40 bytes. Thus, pa_range_info[].t0sz = 1 (VTCR.S) | 8 (VTCR.T0SZ) ie 11000b which is 24. VTCR.T0SZ, is bits [5:0] for ARM_64. VTCR.T0SZ is bits [3:0] and S(sign extension), bit[4] for ARM_32. For this, we have used struct bitfields to convert pa_range_info[].t0sz to its ARM_32 variant. pa_range_info[] is indexed by ID_AA64MMFR0_EL1.PARange which is present in Arm64 only. This is the reason we do not specify the indices for ARM_32. Also, we duplicated the entry "{ 40, 24/*24*/, 1, 1 }" between ARM_64 and ARM_32. This is done to avoid introducing extra #if-defs. Signed-off-by: Ayan Kumar Halder <ayan.kumar.halder@xxxxxxx> --- Changes from - v3 - 1. New patch introduced in v4. 2. Restructure the code such that pa_range_info[] is used both by ARM_32 as well as ARM_64. v4 - 1. Removed the hardcoded definitions of P2M_ROOT_ORDER and P2M_ROOT_LEVEL. The reason being root_order will not be always 1 (See the next patch). 2. Updated the commit message to explain t0sz, sl0 and root_order values for 32-bit IPA on Arm32. 3. Some sanity fixes. v5 - pa_range_info is indexed by system_cpuinfo.mm64.pa_range. ie when PARange is 0, the PA size is 32, 1 -> 36 and so on. So pa_range_info[] has been updated accordingly. For ARM_32 pa_range_info[0] = 0 and pa_range_info[1] = 0 as we do not support 32-bit, 36-bit physical address range yet. v6 - 1. Added pa_range_info[] entries for ARM_32 without indices. Some entry may be duplicated between ARM_64 and ARM_32. 2. Recalculate p2m_ipa_bits for ARM_32 from T0SZ (similar to ARM_64). 3. Introduced an union to reinterpret T0SZ bits between ARM_32 and ARM_64. v7 - 1. Used struct bifield instead of union to reinterpret T0SZ bits between ARM_32 and ARM_64. 2. Removed the invalid entry for ARM_32. xen/arch/arm/include/asm/p2m.h | 6 ---- xen/arch/arm/p2m.c | 50 +++++++++++++++++++++++++--------- 2 files changed, 37 insertions(+), 19 deletions(-) diff --git a/xen/arch/arm/include/asm/p2m.h b/xen/arch/arm/include/asm/p2m.h index f67e9ddc72..940495d42b 100644 --- a/xen/arch/arm/include/asm/p2m.h +++ b/xen/arch/arm/include/asm/p2m.h @@ -14,16 +14,10 @@ /* Holds the bit size of IPAs in p2m tables. */ extern unsigned int p2m_ipa_bits; -#ifdef CONFIG_ARM_64 extern unsigned int p2m_root_order; extern unsigned int p2m_root_level; #define P2M_ROOT_ORDER p2m_root_order #define P2M_ROOT_LEVEL p2m_root_level -#else -/* First level P2M is always 2 consecutive pages */ -#define P2M_ROOT_ORDER 1 -#define P2M_ROOT_LEVEL 1 -#endif struct domain; diff --git a/xen/arch/arm/p2m.c b/xen/arch/arm/p2m.c index 418997843d..76388ba54b 100644 --- a/xen/arch/arm/p2m.c +++ b/xen/arch/arm/p2m.c @@ -19,9 +19,9 @@ #define INVALID_VMID 0 /* VMID 0 is reserved */ -#ifdef CONFIG_ARM_64 unsigned int __read_mostly p2m_root_order; unsigned int __read_mostly p2m_root_level; +#ifdef CONFIG_ARM_64 static unsigned int __read_mostly max_vmid = MAX_VMID_8_BIT; /* VMID is by default 8 bit width on AArch64 */ #define MAX_VMID max_vmid @@ -2247,16 +2247,6 @@ void __init setup_virt_paging(void) /* Setup Stage 2 address translation */ register_t val = VTCR_RES1|VTCR_SH0_IS|VTCR_ORGN0_WBWA|VTCR_IRGN0_WBWA; -#ifdef CONFIG_ARM_32 - if ( p2m_ipa_bits < 40 ) - panic("P2M: Not able to support %u-bit IPA at the moment\n", - p2m_ipa_bits); - - printk("P2M: 40-bit IPA\n"); - p2m_ipa_bits = 40; - val |= VTCR_T0SZ(0x18); /* 40 bit IPA */ - val |= VTCR_SL0(0x1); /* P2M starts at first level */ -#else /* CONFIG_ARM_64 */ static const struct { unsigned int pabits; /* Physical Address Size */ unsigned int t0sz; /* Desired T0SZ, minimum in comment */ @@ -2265,6 +2255,7 @@ void __init setup_virt_paging(void) } pa_range_info[] __initconst = { /* T0SZ minimum and SL0 maximum from ARM DDI 0487H.a Table D5-6 */ /* PA size, t0sz(min), root-order, sl0(max) */ +#ifdef CONFIG_ARM_64 [0] = { 32, 32/*32*/, 0, 1 }, [1] = { 36, 28/*28*/, 0, 1 }, [2] = { 40, 24/*24*/, 1, 1 }, @@ -2273,11 +2264,28 @@ void __init setup_virt_paging(void) [5] = { 48, 16/*16*/, 0, 2 }, [6] = { 52, 12/*12*/, 4, 2 }, [7] = { 0 } /* Invalid */ +#else + { 40, 24/*24*/, 1, 1 } +#endif }; unsigned int i; unsigned int pa_range = 0x10; /* Larger than any possible value */ +#ifdef CONFIG_ARM_32 + /* + * Typecast pa_range_info[].t0sz into ARM_32 bit variant. + * + * VTCR.T0SZ is bits [3:0] and S(sign extension), bit[4] for ARM_32. + * Thus, pa_range_info[].t0sz is translated to its ARM_32 variant using + * struct bitfields. + */ + struct + { + signed int val:5; + } t0sz_32; +#else + /* * Restrict "p2m_ipa_bits" if needed. As P2M table is always configured * with IPA bits == PA bits, compare against "pabits". @@ -2291,6 +2299,7 @@ void __init setup_virt_paging(void) */ if ( system_cpuinfo.mm64.vmid_bits == MM64_VMID_16_BITS_SUPPORT ) max_vmid = MAX_VMID_16_BIT; +#endif /* Choose suitable "pa_range" according to the resulted "p2m_ipa_bits". */ for ( i = 0; i < ARRAY_SIZE(pa_range_info); i++ ) @@ -2304,26 +2313,41 @@ void __init setup_virt_paging(void) /* pa_range is 4 bits but we don't support all modes */ if ( pa_range >= ARRAY_SIZE(pa_range_info) || !pa_range_info[pa_range].pabits ) - panic("Unknown encoding of ID_AA64MMFR0_EL1.PARange %x\n", pa_range); + { + /* + * In case of ARM_64, we do not support this encoding of + * ID_AA64MMFR0_EL1.PARange + */ + panic("Unsupported value for p2m_ipa_bits = 0x%x\n", p2m_ipa_bits); + } +#ifdef CONFIG_ARM_64 val |= VTCR_PS(pa_range); val |= VTCR_TG0_4K; /* Set the VS bit only if 16 bit VMID is supported. */ if ( MAX_VMID == MAX_VMID_16_BIT ) val |= VTCR_VS; +#endif + val |= VTCR_SL0(pa_range_info[pa_range].sl0); val |= VTCR_T0SZ(pa_range_info[pa_range].t0sz); p2m_root_order = pa_range_info[pa_range].root_order; p2m_root_level = 2 - pa_range_info[pa_range].sl0; + +#ifdef CONFIG_ARM_64 p2m_ipa_bits = 64 - pa_range_info[pa_range].t0sz; +#else + t0sz_32.val = pa_range_info[pa_range].t0sz; + p2m_ipa_bits = 32 - t0sz_32.val; +#endif printk("P2M: %d-bit IPA with %d-bit PA and %d-bit VMID\n", p2m_ipa_bits, pa_range_info[pa_range].pabits, ( MAX_VMID == MAX_VMID_16_BIT ) ? 16 : 8); -#endif + printk("P2M: %d levels with order-%d root, VTCR 0x%"PRIregister"\n", 4 - P2M_ROOT_LEVEL, P2M_ROOT_ORDER, val); -- 2.17.1
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |