|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [PATCH v7 06/12] vpci/header: handle p2m range sets per BAR
From: Oleksandr Andrushchenko <oleksandr_andrushchenko@xxxxxxxx>
Instead of handling a single range set, that contains all the memory
regions of all the BARs and ROM, have them per BAR.
As the range sets are now created when a PCI device is added and destroyed
when it is removed so make them named and accounted.
Note that rangesets were chosen here despite there being only up to
3 separate ranges in each set (typically just 1). But rangeset per BAR
was chosen for the ease of implementation and existing code re-usability.
This is in preparation of making non-identity mappings in p2m for the MMIOs.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@xxxxxxxx>
---
Since v6:
- update according to the new locking scheme
- remove odd fail label in modify_bars
Since v5:
- fix comments
- move rangeset allocation to init_bars and only allocate
for MAPPABLE BARs
- check for overlap with the already setup BAR ranges
Since v4:
- use named range sets for BARs (Jan)
- changes required by the new locking scheme
- updated commit message (Jan)
Since v3:
- re-work vpci_cancel_pending accordingly to the per-BAR handling
- s/num_mem_ranges/map_pending and s/uint8_t/bool
- ASSERT(bar->mem) in modify_bars
- create and destroy the rangesets on add/remove
---
xen/drivers/vpci/header.c | 238 +++++++++++++++++++++++++++-----------
xen/drivers/vpci/vpci.c | 5 +
xen/include/xen/vpci.h | 3 +-
3 files changed, 180 insertions(+), 66 deletions(-)
diff --git a/xen/drivers/vpci/header.c b/xen/drivers/vpci/header.c
index 8eebbf968b..8e722857d6 100644
--- a/xen/drivers/vpci/header.c
+++ b/xen/drivers/vpci/header.c
@@ -141,63 +141,102 @@ static void modify_decoding(const struct pci_dev *pdev,
uint16_t cmd,
bool vpci_process_pending(struct vcpu *v)
{
- if ( v->vpci.mem )
+ struct pci_dev *pdev = v->vpci.pdev;
+
+ if ( !pdev )
+ return false;
+
+ read_lock(&v->domain->vpci_rwlock);
+
+ if ( v->vpci.map_pending )
{
struct map_data data = {
.d = v->domain,
.map = v->vpci.cmd & PCI_COMMAND_MEMORY,
};
- int rc = rangeset_consume_ranges(v->vpci.mem, map_range, &data);
-
- if ( rc == -ERESTART )
- return true;
-
- read_lock(&v->domain->vpci_rwlock);
- spin_lock(&v->vpci.pdev->vpci->lock);
- /* Disable memory decoding unconditionally on failure. */
- modify_decoding(v->vpci.pdev,
- rc ? v->vpci.cmd & ~PCI_COMMAND_MEMORY : v->vpci.cmd,
- !rc && v->vpci.rom_only);
- spin_unlock(&v->vpci.pdev->vpci->lock);
- read_unlock(&v->domain->vpci_rwlock);
-
- rangeset_destroy(v->vpci.mem);
- v->vpci.mem = NULL;
- if ( rc )
- /*
- * FIXME: in case of failure remove the device from the domain.
- * Note that there might still be leftover mappings. While this is
- * safe for Dom0, for DomUs the domain will likely need to be
- * killed in order to avoid leaking stale p2m mappings on
- * failure.
- */
- vpci_remove_device(v->vpci.pdev);
+ struct vpci_header *header = &pdev->vpci->header;
+ unsigned int i;
+
+ for ( i = 0; i < ARRAY_SIZE(header->bars); i++ )
+ {
+ struct vpci_bar *bar = &header->bars[i];
+ int rc;
+
+ if ( rangeset_is_empty(bar->mem) )
+ continue;
+
+ rc = rangeset_consume_ranges(bar->mem, map_range, &data);
+
+ if ( rc == -ERESTART )
+ {
+ read_unlock(&v->domain->vpci_rwlock);
+ return true;
+ }
+
+ spin_lock(&pdev->vpci->lock);
+ /* Disable memory decoding unconditionally on failure. */
+ modify_decoding(pdev, rc ? v->vpci.cmd & ~PCI_COMMAND_MEMORY :
+ v->vpci.cmd, !rc && v->vpci.rom_only);
+ spin_unlock(&pdev->vpci->lock);
+
+ if ( rc )
+ {
+ /*
+ * FIXME: in case of failure remove the device from the domain.
+ * Note that there might still be leftover mappings. While this
+ * is safe for Dom0, for DomUs the domain needs to be killed in
+ * order to avoid leaking stale p2m mappings on failure.
+ */
+ v->vpci.map_pending = false;
+ read_unlock(&v->domain->vpci_rwlock);
+
+ if ( is_hardware_domain(v->domain) )
+ vpci_remove_device(pdev);
+ else
+ domain_crash(v->domain);
+
+ return false;
+ }
+ }
+
+ v->vpci.map_pending = false;
}
+ read_unlock(&v->domain->vpci_rwlock);
+
return false;
}
static int __init apply_map(struct domain *d, const struct pci_dev *pdev,
- struct rangeset *mem, uint16_t cmd)
+ uint16_t cmd)
{
struct map_data data = { .d = d, .map = true };
- int rc;
+ struct vpci_header *header = &pdev->vpci->header;
+ int rc = 0;
+ unsigned int i;
ASSERT(rw_is_write_locked(&d->vpci_rwlock));
- while ( (rc = rangeset_consume_ranges(mem, map_range, &data)) == -ERESTART
)
+ for ( i = 0; i < ARRAY_SIZE(header->bars); i++ )
{
- /*
- * It's safe to drop and reacquire the lock in this context
- * without risking pdev disappearing because devices cannot be
- * removed until the initial domain has been started.
- */
- write_unlock(&d->vpci_rwlock);
- process_pending_softirqs();
- write_lock(&d->vpci_rwlock);
- }
+ struct vpci_bar *bar = &header->bars[i];
+
+ if ( rangeset_is_empty(bar->mem) )
+ continue;
- rangeset_destroy(mem);
+ while ( (rc = rangeset_consume_ranges(bar->mem, map_range,
+ &data)) == -ERESTART )
+ {
+ /*
+ * It's safe to drop and reacquire the lock in this context
+ * without risking pdev disappearing because devices cannot be
+ * removed until the initial domain has been started.
+ */
+ write_unlock(&d->vpci_rwlock);
+ process_pending_softirqs();
+ write_lock(&d->vpci_rwlock);
+ }
+ }
if ( !rc )
modify_decoding(pdev, cmd, false);
@@ -205,10 +244,12 @@ static int __init apply_map(struct domain *d, const
struct pci_dev *pdev,
}
static void defer_map(struct domain *d, struct pci_dev *pdev,
- struct rangeset *mem, uint16_t cmd, bool rom_only)
+ uint16_t cmd, bool rom_only)
{
struct vcpu *curr = current;
+ ASSERT(!!rw_is_write_locked(&pdev->domain->vpci_rwlock));
+
/*
* FIXME: when deferring the {un}map the state of the device should not
* be trusted. For example the enable bit is toggled after the device
@@ -216,7 +257,7 @@ static void defer_map(struct domain *d, struct pci_dev
*pdev,
* started for the same device if the domain is not well-behaved.
*/
curr->vpci.pdev = pdev;
- curr->vpci.mem = mem;
+ curr->vpci.map_pending = true;
curr->vpci.cmd = cmd;
curr->vpci.rom_only = rom_only;
/*
@@ -231,30 +272,31 @@ static void defer_map(struct domain *d, struct pci_dev
*pdev,
static int modify_bars(const struct pci_dev *pdev, uint16_t cmd, bool rom_only)
{
struct vpci_header *header = &pdev->vpci->header;
- struct rangeset *mem = rangeset_new(NULL, NULL, 0);
struct pci_dev *tmp, *dev = NULL;
const struct vpci_msix *msix = pdev->vpci->msix;
- unsigned int i;
+ unsigned int i, j;
int rc;
-
- if ( !mem )
- return -ENOMEM;
+ bool map_pending;
/*
- * Create a rangeset that represents the current device BARs memory region
- * and compare it against all the currently active BAR memory regions. If
- * an overlap is found, subtract it from the region to be mapped/unmapped.
+ * Create a rangeset per BAR that represents the current device memory
+ * region and compare it against all the currently active BAR memory
+ * regions. If an overlap is found, subtract it from the region to be
+ * mapped/unmapped.
*
- * First fill the rangeset with all the BARs of this device or with the ROM
+ * First fill the rangesets with the BARs of this device or with the ROM
* BAR only, depending on whether the guest is toggling the memory decode
* bit of the command register, or the enable bit of the ROM BAR register.
*/
for ( i = 0; i < ARRAY_SIZE(header->bars); i++ )
{
- const struct vpci_bar *bar = &header->bars[i];
+ struct vpci_bar *bar = &header->bars[i];
unsigned long start = PFN_DOWN(bar->addr);
unsigned long end = PFN_DOWN(bar->addr + bar->size - 1);
+ if ( !bar->mem )
+ continue;
+
if ( !MAPPABLE_BAR(bar) ||
(rom_only ? bar->type != VPCI_BAR_ROM
: (bar->type == VPCI_BAR_ROM && !header->rom_enabled))
||
@@ -270,14 +312,31 @@ static int modify_bars(const struct pci_dev *pdev,
uint16_t cmd, bool rom_only)
continue;
}
- rc = rangeset_add_range(mem, start, end);
+ rc = rangeset_add_range(bar->mem, start, end);
if ( rc )
{
printk(XENLOG_G_WARNING "Failed to add [%lx, %lx]: %d\n",
start, end, rc);
- rangeset_destroy(mem);
return rc;
}
+
+ /* Check for overlap with the already setup BAR ranges. */
+ for ( j = 0; j < i; j++ )
+ {
+ struct vpci_bar *bar = &header->bars[j];
+
+ if ( rangeset_is_empty(bar->mem) )
+ continue;
+
+ rc = rangeset_remove_range(bar->mem, start, end);
+ if ( rc )
+ {
+ printk(XENLOG_G_WARNING
+ "Failed to remove overlapping range [%lx, %lx]: %d\n",
+ start, end, rc);
+ return rc;
+ }
+ }
}
/* Remove any MSIX regions if present. */
@@ -287,14 +346,21 @@ static int modify_bars(const struct pci_dev *pdev,
uint16_t cmd, bool rom_only)
unsigned long end = PFN_DOWN(vmsix_table_addr(pdev->vpci, i) +
vmsix_table_size(pdev->vpci, i) - 1);
- rc = rangeset_remove_range(mem, start, end);
- if ( rc )
+ for ( j = 0; j < ARRAY_SIZE(header->bars); j++ )
{
- printk(XENLOG_G_WARNING
- "Failed to remove MSIX table [%lx, %lx]: %d\n",
- start, end, rc);
- rangeset_destroy(mem);
- return rc;
+ const struct vpci_bar *bar = &header->bars[j];
+
+ if ( rangeset_is_empty(bar->mem) )
+ continue;
+
+ rc = rangeset_remove_range(bar->mem, start, end);
+ if ( rc )
+ {
+ printk(XENLOG_G_WARNING
+ "Failed to remove MSIX table [%lx, %lx]: %d\n",
+ start, end, rc);
+ return rc;
+ }
}
}
@@ -327,7 +393,8 @@ static int modify_bars(const struct pci_dev *pdev, uint16_t
cmd, bool rom_only)
unsigned long start = PFN_DOWN(bar->addr);
unsigned long end = PFN_DOWN(bar->addr + bar->size - 1);
- if ( !bar->enabled || !rangeset_overlaps_range(mem, start, end) ||
+ if ( !bar->enabled ||
+ !rangeset_overlaps_range(bar->mem, start, end) ||
/*
* If only the ROM enable bit is toggled check against other
* BARs in the same device for overlaps, but not against the
@@ -336,12 +403,11 @@ static int modify_bars(const struct pci_dev *pdev,
uint16_t cmd, bool rom_only)
(rom_only && tmp == pdev && bar->type == VPCI_BAR_ROM) )
continue;
- rc = rangeset_remove_range(mem, start, end);
+ rc = rangeset_remove_range(bar->mem, start, end);
if ( rc )
{
printk(XENLOG_G_WARNING "Failed to remove [%lx, %lx]: %d\n",
start, end, rc);
- rangeset_destroy(mem);
pcidevs_unlock();
return rc;
}
@@ -362,10 +428,23 @@ static int modify_bars(const struct pci_dev *pdev,
uint16_t cmd, bool rom_only)
* will always be to establish mappings and process all the BARs.
*/
ASSERT((cmd & PCI_COMMAND_MEMORY) && !rom_only);
- return apply_map(pdev->domain, pdev, mem, cmd);
+ return apply_map(pdev->domain, pdev, cmd);
}
- defer_map(dev->domain, dev, mem, cmd, rom_only);
+ /* Find out how many memory ranges has left after MSI and overlaps. */
+ map_pending = false;
+ for ( i = 0; i < ARRAY_SIZE(header->bars); i++ )
+ if ( !rangeset_is_empty(header->bars[i].mem) )
+ {
+ map_pending = true;
+ break;
+ }
+
+ /* If there's no mapping work write the command register now. */
+ if ( !map_pending )
+ pci_conf_write16(pdev->sbdf, PCI_COMMAND, cmd);
+ else
+ defer_map(dev->domain, dev, cmd, rom_only);
return 0;
}
@@ -556,6 +635,19 @@ static void cf_check rom_write(
rom->addr = val & PCI_ROM_ADDRESS_MASK;
}
+static int bar_add_rangeset(struct pci_dev *pdev, struct vpci_bar *bar, int i)
+{
+ char str[32];
+
+ snprintf(str, sizeof(str), "%pp:BAR%d", &pdev->sbdf, i);
+
+ bar->mem = rangeset_new(pdev->domain, str, RANGESETF_no_print);
+ if ( !bar->mem )
+ return -ENOMEM;
+
+ return 0;
+}
+
static int cf_check init_bars(struct pci_dev *pdev)
{
uint16_t cmd;
@@ -639,6 +731,13 @@ static int cf_check init_bars(struct pci_dev *pdev)
else
bars[i].type = VPCI_BAR_MEM32;
+ rc = bar_add_rangeset(pdev, &bars[i], i);
+ if ( rc )
+ {
+ bars[i].type = VPCI_BAR_EMPTY;
+ return rc;
+ }
+
rc = pci_size_mem_bar(pdev->sbdf, reg, &addr, &size,
(i == num_bars - 1) ? PCI_BAR_LAST : 0);
if ( rc < 0 )
@@ -690,6 +789,15 @@ static int cf_check init_bars(struct pci_dev *pdev)
rom_reg, 4, rom);
if ( rc )
rom->type = VPCI_BAR_EMPTY;
+ else
+ {
+ rc = bar_add_rangeset(pdev, rom, i);
+ if ( rc )
+ {
+ rom->type = VPCI_BAR_EMPTY;
+ return rc;
+ }
+ }
header->rom_reg = rom_reg;
}
diff --git a/xen/drivers/vpci/vpci.c b/xen/drivers/vpci/vpci.c
index 4182c65eaa..b542ddaf7b 100644
--- a/xen/drivers/vpci/vpci.c
+++ b/xen/drivers/vpci/vpci.c
@@ -39,6 +39,7 @@ extern vpci_register_init_t *const __end_vpci_array[];
void vpci_remove_device(struct pci_dev *pdev)
{
struct vpci *vpci;
+ unsigned int i;
if ( !has_vpci(pdev->domain) )
return;
@@ -73,6 +74,10 @@ void vpci_remove_device(struct pci_dev *pdev)
if ( pdev->vpci->msix->table[i] )
iounmap(pdev->vpci->msix->table[i]);
}
+
+ for ( i = 0; i < ARRAY_SIZE(vpci->header.bars); i++ )
+ rangeset_destroy(vpci->header.bars[i].mem);
+
xfree(vpci->msix);
xfree(vpci->msi);
xfree(vpci);
diff --git a/xen/include/xen/vpci.h b/xen/include/xen/vpci.h
index e9170cc8ca..1e42a59c1d 100644
--- a/xen/include/xen/vpci.h
+++ b/xen/include/xen/vpci.h
@@ -75,6 +75,7 @@ struct vpci {
/* Guest view of the BAR: address and lower bits. */
uint64_t guest_reg;
uint64_t size;
+ struct rangeset *mem;
enum {
VPCI_BAR_EMPTY,
VPCI_BAR_IO,
@@ -162,9 +163,9 @@ struct vpci {
struct vpci_vcpu {
/* Per-vcpu structure to store state while {un}mapping of PCI BARs. */
- struct rangeset *mem;
struct pci_dev *pdev;
uint16_t cmd;
+ bool map_pending : 1;
bool rom_only : 1;
};
--
2.40.1
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |