[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[XEN PATCH 1/4] automation: Add ECLAIR utilities and settings



The files with extension ecl are ECLAIR configurations that
are loaded during the analysis phase or during the report
generation phase: analysis.ecl is the main file for the analysis
phase, while reports.ecl is the one for the report phase.
All other ecl files are included by one of the two main ones.

The actions* scripts implement the integration with the CI server,
they are completely general and can be amended to work with any CI
server. Their presence in xen.git is recommended so that maintainance
would be easier.

analyze.sh is the script that actually triggers the analysis.

Signed-off-by: Simone Ballarin <simone.ballarin@xxxxxxxxxxx>

--
Changes in v3:
- split ECLAIR configurations and scripts in a separate patch;
- remove references to "Task (a): Xen Coding Guidelines v1.0".

Changes in v2:
- add ECLAIR configuration files (before they were fetched from a separate
    repository);
- now the pipeline fails if there are new violations of guidelines tagged
    with clean:added.
---
 automation/eclair_analysis/ECLAIR/Set1.ecl    |  59 ++++
 automation/eclair_analysis/ECLAIR/Set2.ecl    |  25 ++
 automation/eclair_analysis/ECLAIR/Set3.ecl    |  67 ++++
 .../eclair_analysis/ECLAIR/action.helpers     | 193 ++++++++++++
 .../eclair_analysis/ECLAIR/action.settings    | 172 ++++++++++
 .../ECLAIR/action_clean_added.sh              |  36 +++
 .../eclair_analysis/ECLAIR/action_log.sh      |  15 +
 .../ECLAIR/action_pull_request.sh             |  57 ++++
 .../eclair_analysis/ECLAIR/action_push.sh     |  95 ++++++
 .../ECLAIR/action_upload_sarif.sh             |  31 ++
 .../eclair_analysis/ECLAIR/analysis.ecl       |  25 ++
 automation/eclair_analysis/ECLAIR/analyze.sh  | 106 +++++++
 .../ECLAIR/call_properties.ecl                | 106 +++++++
 .../eclair_analysis/ECLAIR/deviations.ecl     | 298 ++++++++++++++++++
 .../eclair_analysis/ECLAIR/out_of_scope.ecl   | 127 ++++++++
 .../ECLAIR/print_analyzed_files.sh            |  66 ++++
 .../eclair_analysis/ECLAIR/public_APIs.ecl    |   6 +
 automation/eclair_analysis/ECLAIR/report.ecl  |   4 +
 automation/eclair_analysis/ECLAIR/tagging.ecl |  34 ++
 .../eclair_analysis/ECLAIR/toolchain.ecl      | 275 ++++++++++++++++
 20 files changed, 1797 insertions(+)
 create mode 100644 automation/eclair_analysis/ECLAIR/Set1.ecl
 create mode 100644 automation/eclair_analysis/ECLAIR/Set2.ecl
 create mode 100644 automation/eclair_analysis/ECLAIR/Set3.ecl
 create mode 100644 automation/eclair_analysis/ECLAIR/action.helpers
 create mode 100644 automation/eclair_analysis/ECLAIR/action.settings
 create mode 100755 automation/eclair_analysis/ECLAIR/action_clean_added.sh
 create mode 100755 automation/eclair_analysis/ECLAIR/action_log.sh
 create mode 100644 automation/eclair_analysis/ECLAIR/action_pull_request.sh
 create mode 100755 automation/eclair_analysis/ECLAIR/action_push.sh
 create mode 100755 automation/eclair_analysis/ECLAIR/action_upload_sarif.sh
 create mode 100644 automation/eclair_analysis/ECLAIR/analysis.ecl
 create mode 100755 automation/eclair_analysis/ECLAIR/analyze.sh
 create mode 100644 automation/eclair_analysis/ECLAIR/call_properties.ecl
 create mode 100644 automation/eclair_analysis/ECLAIR/deviations.ecl
 create mode 100644 automation/eclair_analysis/ECLAIR/out_of_scope.ecl
 create mode 100755 automation/eclair_analysis/ECLAIR/print_analyzed_files.sh
 create mode 100644 automation/eclair_analysis/ECLAIR/public_APIs.ecl
 create mode 100644 automation/eclair_analysis/ECLAIR/report.ecl
 create mode 100644 automation/eclair_analysis/ECLAIR/tagging.ecl
 create mode 100644 automation/eclair_analysis/ECLAIR/toolchain.ecl

diff --git a/automation/eclair_analysis/ECLAIR/Set1.ecl 
b/automation/eclair_analysis/ECLAIR/Set1.ecl
new file mode 100644
index 0000000000..86b8e7e772
--- /dev/null
+++ b/automation/eclair_analysis/ECLAIR/Set1.ecl
@@ -0,0 +1,59 @@
+-doc_begin="Set 1 of Xen MISRA C guidelines"
+-enable=MC3R1.R9.1
+-enable=MC3R1.R12.5
+-enable=MC3R1.R17.3
+-enable=MC3R1.R17.4
+-enable=MC3R1.R17.6
+-enable=MC3R1.R19.1
+-enable=MC3R1.R21.13
+-enable=MC3R1.R21.17
+-enable=MC3R1.R21.18
+-enable=MC3R1.R21.19
+-enable=MC3R1.R21.20
+-enable=MC3R1.R21.21
+-enable=MC3R1.R22.2
+-enable=MC3R1.R22.4
+-enable=MC3R1.R22.5
+-enable=MC3R1.R22.6
+-enable=MC3R1.D1.1
+-enable=MC3R1.D2.1
+-enable=MC3R1.D4.1
+-enable=MC3R1.D4.3
+-enable=MC3R1.D4.7
+-enable=MC3R1.D4.10
+-enable=MC3R1.D4.11
+-enable=MC3R1.D4.14
+-enable=MC3R1.R1.1
+-enable=MC3R1.R1.3
+-enable=MC3R1.R1.4
+-enable=MC3R1.R2.1
+-enable=MC3R1.R2.2
+-enable=MC3R1.R3.1
+-enable=MC3R1.R3.2
+-enable=MC3R1.R4.1
+-enable=MC3R1.R5.1
+-enable=MC3R1.R5.2
+-enable=MC3R1.R5.3
+-enable=MC3R1.R5.4
+-enable=MC3R1.R5.6
+-enable=MC3R1.R6.1
+-enable=MC3R1.R6.2
+-enable=MC3R1.R7.1
+-enable=MC3R1.R7.2
+-enable=MC3R1.R7.3
+-enable=MC3R1.R7.4
+-enable=MC3R1.R8.1
+-enable=MC3R1.R8.2
+-enable=MC3R1.R8.3
+-enable=MC3R1.R8.4
+-enable=MC3R1.R8.5
+-enable=MC3R1.R8.6
+-enable=MC3R1.R8.8
+-enable=MC3R1.R8.10
+-enable=MC3R1.R8.12
+-enable=MC3R1.R8.14
+-enable=MC3R1.R9.2
+-enable=MC3R1.R9.3
+-enable=MC3R1.R9.4
+-enable=MC3R1.R9.5
+-doc_end
diff --git a/automation/eclair_analysis/ECLAIR/Set2.ecl 
b/automation/eclair_analysis/ECLAIR/Set2.ecl
new file mode 100644
index 0000000000..7608335cf4
--- /dev/null
+++ b/automation/eclair_analysis/ECLAIR/Set2.ecl
@@ -0,0 +1,25 @@
+-doc_begin="Set 2 of Xen MISRA C guidelines"
+-enable=MC3R1.R10.1
+-enable=MC3R1.R10.2
+-enable=MC3R1.R10.3
+-enable=MC3R1.R10.4
+-enable=MC3R1.R10.6
+-enable=MC3R1.R10.7
+-enable=MC3R1.R10.8
+-enable=MC3R1.R11.1
+-enable=MC3R1.R11.2
+-enable=MC3R1.R11.3
+-enable=MC3R1.R11.6
+-enable=MC3R1.R11.7
+-enable=MC3R1.R11.8
+-enable=MC3R1.R11.9
+-enable=MC3R1.R12.2
+-enable=MC3R1.R13.1
+-enable=MC3R1.R13.2
+-enable=MC3R1.R13.5
+-enable=MC3R1.R13.6
+-enable=MC3R1.R14.1
+-enable=MC3R1.R14.2
+-enable=MC3R1.R14.3
+-enable=MC3R1.R14.4
+-doc_end
diff --git a/automation/eclair_analysis/ECLAIR/Set3.ecl 
b/automation/eclair_analysis/ECLAIR/Set3.ecl
new file mode 100644
index 0000000000..d2c2c4b21f
--- /dev/null
+++ b/automation/eclair_analysis/ECLAIR/Set3.ecl
@@ -0,0 +1,67 @@
+-doc_begin="Set 3 of Xen MISRA C guidelines"
+-enable=MC3R1.D4.12
+-enable=MC3R1.R5.5
+-enable=MC3R1.R5.7
+-enable=MC3R1.R5.8
+-enable=MC3R1.R15.2
+-enable=MC3R1.R15.3
+-enable=MC3R1.R15.6
+-enable=MC3R1.R15.7
+-enable=MC3R1.R16.1
+-enable=MC3R1.R16.2
+-enable=MC3R1.R16.3
+-enable=MC3R1.R16.4
+-enable=MC3R1.R16.5
+-enable=MC3R1.R16.6
+-enable=MC3R1.R16.7
+-enable=MC3R1.R17.1
+-enable=MC3R1.R17.2
+-enable=MC3R1.R17.5
+-enable=MC3R1.R17.7
+-enable=MC3R1.R18.1
+-enable=MC3R1.R18.2
+-enable=MC3R1.R18.3
+-enable=MC3R1.R18.6
+-enable=MC3R1.R18.7
+-enable=MC3R1.R18.8
+-enable=MC3R1.R20.2
+-enable=MC3R1.R20.3
+-enable=MC3R1.R20.4
+-enable=MC3R1.R20.6
+-enable=MC3R1.R20.7
+-enable=MC3R1.R20.8
+-enable=MC3R1.R20.9
+-enable=MC3R1.R20.11
+-enable=MC3R1.R20.12
+-enable=MC3R1.R20.13
+-enable=MC3R1.R20.14
+-enable=MC3R1.R21.1
+-enable=MC3R1.R21.2
+-enable=MC3R1.R21.3
+-enable=MC3R1.R21.4
+-enable=MC3R1.R21.5
+-enable=MC3R1.R21.6
+-enable=MC3R1.R21.7
+-enable=MC3R1.R21.8
+-enable=MC3R1.R21.9
+-enable=MC3R1.R21.10
+-enable=MC3R1.R21.12
+-enable=MC3R1.R21.14
+-enable=MC3R1.R21.15
+-enable=MC3R1.R21.16
+-enable=MC3R1.R22.1
+-enable=MC3R1.R22.3
+-enable=MC3R1.R22.7
+-enable=MC3R1.R22.8
+-enable=MC3R1.R22.9
+-enable=MC3R1.R22.10
+-enable=MC3R1.R2.6
+-enable=MC3R1.R4.2
+-doc_end
+
+-doc_begin="Guidelines added with Xen MISRA C Task (a): Xen Coding Guidelines 
v1.1, June 1, 2023"
+-enable=MC3R1.R21.11
+-enable=MC3R1.D4.4
+-enable=MC3R1.R8.9
+-enable=MC3R1.R12.4
+-doc_end
diff --git a/automation/eclair_analysis/ECLAIR/action.helpers 
b/automation/eclair_analysis/ECLAIR/action.helpers
new file mode 100644
index 0000000000..2ad6428eaa
--- /dev/null
+++ b/automation/eclair_analysis/ECLAIR/action.helpers
@@ -0,0 +1,193 @@
+if [ -n "${GITLAB_CI:-}" ]; then
+    ci=gitlab
+elif [ -n "${GITHUB_ACTION:-}" ]; then
+    ci=github
+elif [ -n "${JENKINS_HOME:-}" ]; then
+    ci=jenkins
+else
+    echo "Unexpected CI/CD context" >&2
+    exit 1
+fi
+
+esc=$(printf '\e')
+cr=$(printf '\r')
+
+open_section() {
+    id=$1
+    title=$2
+    collapsed=$3
+    echo "${esc}[0Ksection_start:$(date 
+%s):${id}${collapsed}${cr}${esc}[0K${esc}[1m${esc}[36m${title}${esc}[m"
+}
+
+close_section() {
+    id=$1
+    echo "${esc}[0Ksection_end:$(date +%s):${id}${cr}${esc}[0K"
+}
+
+summary() {
+    fixedReports=
+    newReports=
+    unfixedReports=
+    while read -r line; do
+        var=${line%%: *}
+        val=${line#*: }
+        eval "${var}=${val}"
+    done <"${updateLog}"
+
+    case "${ci}" in
+    github)
+        nl="\\"
+        ;;
+    gitlab)
+        nl=
+        ;;
+    jenkins)
+        nl="<br/>"
+        ;;
+    *)
+        nl=
+        ;;
+    esac
+
+    if [ -z "${newReports}" ]; then
+        fixedMsg=
+        unfixedMsg="Unfixed reports: ${unfixedReports}"
+        countsMsg="${unfixedMsg}"
+    else
+        fixedMsg="Fixed reports: ${fixedReports}"
+        unfixedMsg="Unfixed reports: ${unfixedReports} [new: ${newReports}]"
+        countsMsg="${fixedMsg}${nl}
+${unfixedMsg}"
+    fi
+    case "${ci}" in
+    jenkins)
+        cat <<EOF >"${summaryTxt}"
+${countsMsg}                                                                   
           ${nl}
+<a href="https://www.bugseng.com/eclair";>
+  <img src="${eclairReportUrlPrefix}/rsrc/eclair.svg" width="100" />
+</a>
+<h3>${jobHeadline}</h3>
+<a href="${indexHtmlUrl}">Browse analysis results</a>
+EOF
+        ;;
+    *)
+        cat <<EOF >"${summaryTxt}"
+<a href="https://www.bugseng.com/eclair";>
+  <img src="${eclairReportUrlPrefix}/rsrc/eclair.svg" width="100" />
+</a>
+Analysis Summary
+
+${jobHeadline}${nl}
+${countsMsg}${nl}
+[Browse analysis](${indexHtmlUrl})
+EOF
+        ;;
+    esac
+
+    case ${ci} in
+    github)
+        cat "${summaryTxt}" >"${GITHUB_STEP_SUMMARY}"
+        ;;
+    gitlab)
+        open_section ECLAIR_summary "ECLAIR analysis summary" ""
+        # Generate summary and print it (GitLab-specific)
+        cat <<EOF
+${jobHeadline}
+${countsMsg}
+Browse analysis: ${esc}[33m${indexHtmlUrl}${esc}[m
+EOF
+        close_section ECLAIR_summary
+        ;;
+    jenkins)
+        cat <<EOF
+${jobHeadline}
+${fixedMsg}
+${unfixedMsg}
+Browse analysis: ${indexHtmlUrl}
+EOF
+        ;;
+    *)
+        echo "Unexpected CI/CD context" >&2
+        exit 1
+        ;;
+    esac
+}
+
+log_file() {
+    section_id=$1
+    section_name=$2
+    file=$3
+    exit_code=$4
+    if [ "${exit_code}" = 0 ]; then
+        collapsed=[collapsed=true]
+    else
+        collapsed=
+    fi
+
+    case ${ci} in
+    github | jenkins)
+        echo "${section_name}"
+        ;;
+    gitlab)
+        open_section "${section_id}" "${section_name}" "${collapsed}"
+        ;;
+    *)
+        echo "Unexpected CI/CD context" >&2
+        exit 1
+        ;;
+    esac
+
+    cat "${file}"
+
+    case ${ci} in
+    github | jenkins) ;;
+    gitlab)
+        close_section "${section_id}"
+        ;;
+    *) ;;
+    esac
+}
+
+maybe_log_file_exit() {
+    section_id=$1
+    section_name=$2
+    file=$3
+    exit_code=$4
+
+    case ${ci} in
+    github | jenkins)
+        echo "${section_name}"
+        ;;
+    gitlab)
+        open_section "${section_id}" "${section_name}" ""
+        ;;
+    *)
+        echo "Unexpected CI/CD context" >&2
+        exit 1
+        ;;
+    esac
+
+    if [ "${exit_code}" != 0 ]; then
+        cat "${file}"
+    fi
+
+    case ${ci} in
+    github | jenkins) ;;
+    gitlab)
+        close_section "${section_id}"
+        ;;
+    *) ;;
+    esac
+    return "${exit_code}"
+}
+
+is_enabled() {
+    case "$1" in
+    true | TRUE | y | Y | yes | YES | 1)
+        return 0
+        ;;
+    *)
+        return 1
+        ;;
+    esac
+}
diff --git a/automation/eclair_analysis/ECLAIR/action.settings 
b/automation/eclair_analysis/ECLAIR/action.settings
new file mode 100644
index 0000000000..0f7950f5ab
--- /dev/null
+++ b/automation/eclair_analysis/ECLAIR/action.settings
@@ -0,0 +1,172 @@
+variantSubDir=
+variantHeadline=
+if [ -n "${VARIANT:-}" ]; then
+    variantSubDir="/${VARIANT}"
+    variantHeadline=" [${VARIANT}]"
+fi
+
+# AUTO PR Feature
+# If the following variables are defined, then all pipelines
+# of other branches will be considered pull-requests to
+# autoPRBranch.
+# Customized
+autoPRRepository="${AUTO_PR_REPOSITORY:-}"
+# Customized
+autoPRBranch="${AUTO_PR_BRANCH:-}"
+
+# Customized
+artifactsRoot=/var/local/eclair
+
+case "${ci}" in
+github)
+    # To be customized
+    repository="${GITHUB_REPOSITORY}"
+    jobId="${GITHUB_RUN_NUMBER}"
+
+    autoPRRemoteUrl="${GITHUB_SERVER_URL}/${autoPRRepository:-}"
+
+    case "${GITHUB_EVENT_NAME}" in
+    pull_request*)
+        event=pull_request
+        pullRequestId="${GITHUB_EVENT_PULL_REQUEST_NUMBER}"
+        pullRequestHeadRepo="${PR_HEAD_REPO}"
+        pullRequestHeadRef="${PR_HEAD_REF}"
+        pullRequestBaseRef="${PR_BASE_REF}"
+        pullRequestUser="${PR_USER}"
+        # baseCommitId and headCommitId are the most recent merge points 
without conflicts
+        git fetch -q --deepen=2
+        baseCommitId=$(git show -s --pretty=%H HEAD^1)
+        headCommitId=$(git show -s --pretty=%H HEAD^2)
+        ;;
+    push | workflow_dispatch)
+        event=push
+        # Extract the branch name from "refs/heads/<branch>"
+        branch="${GITHUB_REF#refs/heads/}"
+        headCommitId="${GITHUB_SHA}"
+        pushUser="${GITHUB_ACTOR}"
+        ;;
+    *)
+        echo "Unexpected GITHUB_REF ${GITHUB_REF}" >&2
+        exit 1
+        ;;
+    esac
+    ;;
+gitlab)
+    # Customized
+    repository="${CI_PROJECT_PATH}"
+    jobId="${CI_JOB_ID}"
+
+    
gitlabApiUrl="${CI_SERVER_PROTOCOL}://${CI_SERVER_HOST}:${CI_SERVER_PORT}/api/v4"
+    
autoPRRemoteUrl="${CI_SERVER_PROTOCOL}://${CI_SERVER_HOST}:${CI_SERVER_PORT}/${autoPRRepository:-}"
+
+    # Customized
+    gitlabBotToken="${ECLAIR_BOT_TOKEN:-}"
+
+    case "${CI_PIPELINE_SOURCE}" in
+    merge_request_event)
+        event=pull_request
+        pullRequestId="${CI_MERGE_REQUEST_IID}"
+        pullRequestHeadRef="${CI_MERGE_REQUEST_SOURCE_BRANCH_NAME}"
+        pullRequestHeadRepo="${CI_MERGE_REQUEST_SOURCE_PROJECT_PATH}"
+        pullRequestBaseRef="${CI_MERGE_REQUEST_TARGET_BRANCH_NAME}"
+        pullRequestUser="${GITLAB_USER_LOGIN}"
+        headCommitId="${CI_COMMIT_SHA}"
+        baseCommitId="${CI_MERGE_REQUEST_DIFF_BASE_SHA}"
+        ;;
+    push | pipeline | web)
+        event=push
+        branch="${CI_COMMIT_BRANCH}"
+        headCommitId="${CI_COMMIT_SHA}"
+        pushUser="${GITLAB_USER_NAME}"
+        ;;
+    *)
+        echo "Unexpected event ${CI_PIPELINE_SOURCE}" >&2
+        exit 1
+        ;;
+    esac
+    ;;
+jenkins)
+    # To be customized
+    repository="${JOB_BASE_NAME}"
+    project="${JOB_NAME}"
+    jobId="${BUILD_NUMBER}"
+
+    jenkinsApiUrl="${JENKINS_URL}"
+    autoPRRemoteUrl="${JENKINS_URL}/${autoPRRepository:-}"
+
+    # To be customized
+    jenkinsBotUsername="${ECLAIR_BOT_USERNAME:-}"
+    jenkinsBotToken="${ECLAIR_BOT_TOKEN:-}"
+
+    event=push
+    branch="${GIT_BRANCH}"
+    headCommitId="${GIT_COMMIT}"
+    pushUser=$(git show --pretty='format:%aN' -s)
+    ;;
+*)
+    echo "Unexpected CI/CD context" >&2
+    exit 1
+    ;;
+esac
+
+if [ "${event}" = "push" ] && [ -n "${autoPRBranch:-}" ]; then
+    # AUTO PR Feature enabled
+    if ! [ "${branch}" = "${autoPRBranch}" ] ||
+        ! [ "${repository}" = "${autoPRRepository}" ]; then
+        event=auto_pull_request
+    fi
+fi
+
+case "${event}" in
+pull_request)
+    subDir="${pullRequestHeadRepo}.ecdf/${pullRequestBaseRef}"
+    jobHeadline="ECLAIR ${ANALYSIS_KIND} on repository ${repository}: 
${pullRequestUser} wants to merge ${pullRequestHeadRepo}:${pullRequestHeadRef} 
(${headCommitId}) into ${pullRequestBaseRef} (${baseCommitId})"
+    ;;
+push)
+    subDir="${branch}"
+    jobHeadline="ECLAIR ${ANALYSIS_KIND} on repository ${repository}: branch 
${branch} (${headCommitId})"
+    badgeLabel="ECLAIR ${ANALYSIS_KIND} ${branch}${variantHeadline} #${jobId}"
+    ;;
+auto_pull_request)
+    git remote remove autoPRRemote || true
+    git remote add autoPRRemote "${autoPRRemoteUrl}"
+    git fetch autoPRRemote
+    subDir="${branch}"
+    baseCommitId=$(git merge-base "autoPRRemote/${autoPRBranch}" HEAD)
+    jobHeadline="ECLAIR ${ANALYSIS_KIND} on repository ${repository}: 
${pushUser} wants to merge ${repository}:${branch} (${headCommitId}) into 
${autoPRRepository}/${autoPRBranch} (${baseCommitId})"
+    ;;
+*)
+    echo "Unexpected event ${event}" >&2
+    exit 1
+    ;;
+esac
+
+case "${repository}" in
+xen-project/xen)
+    # Customized
+    keepOldAnalyses=0
+    ;;
+xen-project/*)
+    # Customized
+    keepOldAnalyses=10
+    ;;
+*)
+    echo "Unexpected repository" >&2
+    exit 1
+    ;;
+esac
+
+ECLAIR_BIN_DIR=/opt/bugseng/eclair/bin/
+
+artifactsDir="${artifactsRoot}/xen-project.ecdf/${repository}/ECLAIR_${ANALYSIS_KIND}"
+subDir="${subDir}${variantSubDir}"
+jobHeadline="${jobHeadline}${variantHeadline}"
+
+# Customized
+eclairReportUrlPrefix=https://saas.eclairit.com:3787
+
+jobDir="${artifactsDir}/${subDir}/${jobId}"
+updateLog="${analysisOutputDir}/update.log"
+commentLog="${analysisOutputDir}/comment.json"
+indexHtmlUrl="${eclairReportUrlPrefix}/fs${jobDir}/index.html"
+summaryTxt="${analysisOutputDir}/summary.txt"
diff --git a/automation/eclair_analysis/ECLAIR/action_clean_added.sh 
b/automation/eclair_analysis/ECLAIR/action_clean_added.sh
new file mode 100755
index 0000000000..59bc35fd13
--- /dev/null
+++ b/automation/eclair_analysis/ECLAIR/action_clean_added.sh
@@ -0,0 +1,36 @@
+#!/bin/sh
+
+set -eu
+
+usage() {
+    echo "Usage: $0 ANALYSIS_OUTPUT_DIR" >&2
+    exit 2
+}
+
+[ $# -eq 1 ] || usage
+
+analysisOutputDir=$1
+
+cleanAddedTxt="${analysisOutputDir}/clean_added.log"
+
+# Load settings and helpers
+. "$(dirname "$0")/action.helpers"
+. "$(dirname "$0")/action.settings"
+
+unexpectedReports=$("${ECLAIR_BIN_DIR}eclair_report" \
+    "-db='${analysisOutputDir}/PROJECT.ecd'" \
+    "-sel_unfixed=unfixed" \
+    "-sel_tag_glob=clean_added,clean,added" \
+    "-print='',reports_count()")
+
+if [ "${unexpectedReports}" -gt 0 ]; then
+    cat <<EOF >"${cleanAddedTxt}"
+Failure: ${unexpectedReports} unexpected reports found.
+Unexpected reports are tagged 'clean:added'.
+EOF
+    exit 1
+else
+    cat <<EOF >"${cleanAddedTxt}"
+Success: No unexpected reports.
+EOF
+fi
diff --git a/automation/eclair_analysis/ECLAIR/action_log.sh 
b/automation/eclair_analysis/ECLAIR/action_log.sh
new file mode 100755
index 0000000000..67125b08f3
--- /dev/null
+++ b/automation/eclair_analysis/ECLAIR/action_log.sh
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+set -eu
+
+usage() {
+    echo "Usage: $0 SECTION_ID SECTION_NAME FILE EXIT_CODE" >&2
+    exit 2
+}
+
+[ $# -eq 4 ] || usage
+
+# Load settings and helpers
+. "$(dirname "$0")/action.helpers"
+
+log_file "$@"
diff --git a/automation/eclair_analysis/ECLAIR/action_pull_request.sh 
b/automation/eclair_analysis/ECLAIR/action_pull_request.sh
new file mode 100644
index 0000000000..68f7e6282e
--- /dev/null
+++ b/automation/eclair_analysis/ECLAIR/action_pull_request.sh
@@ -0,0 +1,57 @@
+#!/bin/sh
+
+set -eu
+
+usage() {
+    echo "Usage: $0 WTOKEN ANALYSIS_OUTPUT_DIR COMMIT_ID" >&2
+    exit 2
+}
+
+[ $# -eq 2 ] || usage
+
+wtoken=$1
+analysisOutputDir=$2
+
+# Load settings and helpers
+. "$(dirname "$0")/action.helpers"
+. "$(dirname "$0")/action.settings"
+
+curl -sS "${eclairReportUrlPrefix}/ext/update_pull_request" \
+    -F "wtoken=${wtoken}" \
+    -F "artifactsDir=${artifactsDir}" \
+    -F "subDir=${subDir}" \
+    -F "jobId=${jobId}" \
+    -F "jobHeadline=${jobHeadline}" \
+    -F "baseCommitId=${baseCommitId}" \
+    -F "keepOldAnalyses=${keepOldAnalyses}" \
+    -F "db=@${analysisOutputDir}/PROJECT.ecd" \
+    >"${updateLog}"
+ex=0
+grep -Fq "unfixedReports: " "${updateLog}" || ex=$?
+maybe_log_file_exit PUBLISH_RESULT "Publishing results" "${updateLog}" "${ex}"
+
+summary
+
+if is_enabled "${ENABLE_ECLAIR_BOT:-}"; then
+    case ${ci} in
+    github)
+        ex=0
+        gh api \
+            --method POST \
+            "/repos/${repository}/issues/${pullRequestId}/comments" \
+            -F "body=@${summaryTxt}" \
+            --silent >"${commentLog}" 2>&1 || ex=$?
+        maybe_log_file_exit ADD_COMMENT "Adding comment" "${commentLog}" 
"${ex}"
+        ;;
+    gitlab)
+        curl -sS --request POST \
+            
"${gitlabApiUrl}/projects/${CI_PROJECT_ID}/merge_requests/${pullRequestId}/notes"
 \
+            -H "PRIVATE-TOKEN: ${gitlabBotToken}" \
+            -F "body=<${summaryTxt}" >"${commentLog}"
+        ex=0
+        grep -Fq "Unfixed reports: " "${commentLog}" || ex=$?
+        maybe_log_file_exit ADD_COMMENT "Adding comment" "${commentLog}" 
"${ex}"
+        ;;
+    *) ;;
+    esac
+fi
diff --git a/automation/eclair_analysis/ECLAIR/action_push.sh 
b/automation/eclair_analysis/ECLAIR/action_push.sh
new file mode 100755
index 0000000000..45215fbf00
--- /dev/null
+++ b/automation/eclair_analysis/ECLAIR/action_push.sh
@@ -0,0 +1,95 @@
+#!/bin/sh
+
+set -eu
+
+usage() {
+    echo "Usage: $0 WTOKEN ANALYSIS_OUTPUT_DIR" >&2
+    exit 2
+}
+
+[ $# -eq 2 ] || usage
+
+wtoken=$1
+analysisOutputDir=$2
+
+# Load settings and helpers
+. "$(dirname "$0")/action.helpers"
+. "$(dirname "$0")/action.settings"
+
+case "${event}" in
+push)
+    curl -sS "${eclairReportUrlPrefix}/ext/update_push" \
+        -F "wtoken=${wtoken}" \
+        -F "artifactsDir=${artifactsDir}" \
+        -F "subDir=${subDir}" \
+        -F "jobId=${jobId}" \
+        -F "jobHeadline=${jobHeadline}" \
+        -F "commitId=${headCommitId}" \
+        -F "badgeLabel=${badgeLabel}" \
+        -F "keepOldAnalyses=${keepOldAnalyses}" \
+        -F "db=@${analysisOutputDir}/PROJECT.ecd" \
+        >"${updateLog}"
+    ;;
+auto_pull_request)
+    curl -sS "${eclairReportUrlPrefix}/ext/update_pull_request" \
+        -F "wtoken=${wtoken}" \
+        -F "artifactsDir=${artifactsDir}" \
+        -F "subDir=${subDir}" \
+        -F "jobId=${jobId}" \
+        -F "jobHeadline=${jobHeadline}" \
+        -F "baseCommitId=${baseCommitId}" \
+        -F "keepOldAnalyses=${keepOldAnalyses}" \
+        -F "db=@${analysisOutputDir}/PROJECT.ecd" \
+        >"${updateLog}"
+    ;;
+*)
+    echo "Unexpected event ${event}" >&2
+    exit 1
+    ;;
+esac
+
+ex=0
+grep -Fq "unfixedReports: " "${updateLog}" || ex=$?
+maybe_log_file_exit PUBLISH_RESULT "Publishing results" "${updateLog}" "${ex}"
+
+summary
+
+if is_enabled "${ENABLE_ECLAIR_BOT:-}"; then
+    case ${ci} in
+    github)
+        ex=0
+        gh api \
+            --method POST \
+            "/repos/${repository}/commits/${headCommitId}/comments" \
+            -F "body=@${summaryTxt}" \
+            --silent >"${commentLog}" 2>&1 || ex=$?
+        maybe_log_file_exit ADD_COMMENT "Adding comment" "${commentLog}" 
"${ex}"
+        ;;
+    gitlab)
+        curl -sS --request POST \
+            
"${gitlabApiUrl}/projects/${CI_PROJECT_ID}/repository/commits/${CI_COMMIT_SHA}/comments"
 \
+            -H "PRIVATE-TOKEN: ${gitlabBotToken}" \
+            -F "note=<${summaryTxt}" >"${commentLog}"
+        ex=0
+        grep -Fq "Unfixed reports: " "${commentLog}" || ex=$?
+        maybe_log_file_exit ADD_COMMENT "Adding comment" "${commentLog}" 
"${ex}"
+        ;;
+    jenkins)
+        ex=0
+        curl \
+            --user "${jenkinsBotUsername}:${jenkinsBotToken}" \
+            --data-urlencode "description=$(cat "${summaryTxt}")" \
+            --data-urlencode "Submit=Submit" \
+            "${jenkinsApiUrl}job/${project}/${jobId}/submitDescription" \
+            >"${commentLog}" 2>&1 || ex=$?
+        curl \
+            --user "${jenkinsBotUsername}:${jenkinsBotToken}" \
+            --data-urlencode "description=$(cat "${summaryTxt}")" \
+            --data-urlencode "Submit=Submit" \
+            "${jenkinsApiUrl}job/${project}/submitDescription" \
+            >"${commentLog}" 2>&1 || ex=$?
+        maybe_log_file_exit ADD_COMMENT "Adding comment" "${commentLog}" 
"${ex}"
+        ;;
+    *) ;;
+    esac
+fi
diff --git a/automation/eclair_analysis/ECLAIR/action_upload_sarif.sh 
b/automation/eclair_analysis/ECLAIR/action_upload_sarif.sh
new file mode 100755
index 0000000000..60b8034fcc
--- /dev/null
+++ b/automation/eclair_analysis/ECLAIR/action_upload_sarif.sh
@@ -0,0 +1,31 @@
+#!/bin/sh
+
+set -eu
+
+usage() {
+    echo "Usage: $0 SARIF_FILE" >&2
+    exit 2
+}
+
+[ $# -eq 1 ] || usage
+
+HERE=$( (
+    cd "$(dirname "$0")"
+    echo "${PWD}"
+))
+
+. "${HERE}/action.helpers"
+
+sarifFile=$1
+sarifPayload=${HERE}/sarif.gz.b64
+uploadLog=${HERE}/upload_sarif.log
+
+gzip -c "${sarifFile}" | base64 -w0 >"${sarifPayload}"
+
+ex=0
+gh api --method POST -H "Accept: application/vnd.github+json" \
+    "/repos/${GITHUB_REPOSITORY}/code-scanning/sarifs" \
+    -f "commit_sha=${GITHUB_SHA}" -f "ref=${GITHUB_REF}" \
+    -F "sarif=@${sarifPayload}" \
+    --silent >"${uploadLog}" 2>&1 || ex=$?
+maybe_log_file_exit ADD_COMMENT "Uploading SARIF" "${uploadLog}" "${ex}"
diff --git a/automation/eclair_analysis/ECLAIR/analysis.ecl 
b/automation/eclair_analysis/ECLAIR/analysis.ecl
new file mode 100644
index 0000000000..fe418d6da1
--- /dev/null
+++ b/automation/eclair_analysis/ECLAIR/analysis.ecl
@@ -0,0 +1,25 @@
+-setq=set,getenv("SET")
+-project_name=getenv("ECLAIR_PROJECT_NAME")
+-project_root=getenv("ECLAIR_PROJECT_ROOT")
+
+-setq=data_dir,getenv("ECLAIR_DATA_DIR")
+
+-verbose
+
+-enable=B.REPORT.ECB
+-config=B.REPORT.ECB,output=join_paths(data_dir,"FRAME.@FRAME@.ecb")
+-config=B.REPORT.ECB,preprocessed=show
+-config=B.REPORT.ECB,macros=10
+
+-enable=B.EXPLAIN
+
+-eval_file=toolchain.ecl
+-eval_file=public_APIs.ecl
+-eval_file=out_of_scope.ecl
+-eval_file=deviations.ecl
+-eval_file=call_properties.ecl
+-eval_file=tagging.ecl
+-eval_file=concat(set,".ecl")
+
+-doc="Hide reports in external code."
+-reports+={hide,all_exp_external}
diff --git a/automation/eclair_analysis/ECLAIR/analyze.sh 
b/automation/eclair_analysis/ECLAIR/analyze.sh
new file mode 100755
index 0000000000..47cdbb03ce
--- /dev/null
+++ b/automation/eclair_analysis/ECLAIR/analyze.sh
@@ -0,0 +1,106 @@
+#!/bin/bash
+# Stop immediately if any executed command has exit status different from 0.
+set -e
+set -o pipefail
+
+script_name="$(basename "$0")"
+
+fatal() {
+  echo "${script_name}: $*" >&2
+  exit 1
+}
+
+usage() {
+  fatal "Usage: ${script_name} <ARM64|X86_64> <Set0|Set1|Set2|Set3>"
+}
+
+if [[ $# -ne 2 ]]; then
+  usage
+fi
+
+# Absolute path of the ECLAIR bin directory.
+export ECLAIR_BIN_DIR=/opt/bugseng/eclair/bin/
+
+# Directory where this script resides: usually in a directory named "ECLAIR".
+SCRIPT_DIR="$(
+  cd "$(dirname "$0")"
+  echo "${PWD}"
+)"
+# Directory where to put all ECLAIR output and temporary files.
+if [[ -z "${ECLAIR_OUTPUT_DIR:-}" ]]; then
+  ECLAIR_OUTPUT_DIR="${PWD}/ECLAIR/out"
+fi
+
+export ECLAIR_DIAGNOSTICS_OUTPUT="${ECLAIR_OUTPUT_DIR}/ANALYSIS.log"
+# Set the variable for the build log file.
+ECLAIR_BUILD_LOG=${ECLAIR_OUTPUT_DIR}/BUILD.log
+# Set the variable for the report log file.
+ECLAIR_REPORT_LOG=${ECLAIR_OUTPUT_DIR}/REPORT.log
+
+if [[ "$1" = "X86_64" ]]; then
+  export CROSS_COMPILE=
+  export XEN_TARGET_ARCH=x86_64
+  EXTRA_ECLAIR_ENV_OPTIONS=-disable=MC3R1.R20.7
+elif [[ "$1" = "ARM64" ]]; then
+  export CROSS_COMPILE=aarch64-linux-gnu-
+  export XEN_TARGET_ARCH=arm64
+else
+  fatal "Unknown configuration: $1"
+fi
+
+VARIANT="${XEN_TARGET_ARCH}"
+
+# Used in analysis.ecl
+case "$2" in
+Set0|Set1|Set2|Set3)
+  export SET="$2"
+  ;;
+*)
+  fatal "Unknown configuration: $2"
+  ;;
+esac
+
+export CC_ALIASES="${CROSS_COMPILE}gcc-12"
+export CXX_ALIASES="${CROSS_COMPILE}g++-12"
+export LD_ALIASES="${CROSS_COMPILE}ld"
+export AR_ALIASES="${CROSS_COMPILE}ar"
+export AS_ALIASES="${CROSS_COMPILE}as"
+export FILEMANIP_ALIASES="cp mv ${CROSS_COMPILE}objcopy"
+
+# ECLAIR binary data directory and workspace.
+export ECLAIR_DATA_DIR="${ECLAIR_OUTPUT_DIR}/.data"
+# ECLAIR workspace.
+export ECLAIR_WORKSPACE="${ECLAIR_DATA_DIR}/eclair_workspace"
+
+# Identifies the particular build of the project.
+export ECLAIR_PROJECT_NAME="XEN_${VARIANT}-${SET}"
+# All paths mentioned in ECLAIR reports that are below this directory
+# will be presented as relative to ECLAIR_PROJECT_ROOT.
+export ECLAIR_PROJECT_ROOT="${PWD}"
+
+# Erase and recreate the output directory and the data directory.
+rm -rf "${ECLAIR_OUTPUT_DIR:?}/*"
+mkdir -p "${ECLAIR_DATA_DIR}"
+
+# Perform the build (from scratch) in an ECLAIR environment.
+"${ECLAIR_BIN_DIR}eclair_env" \
+    "-config_file='${SCRIPT_DIR}/analysis.ecl'" \
+    "${EXTRA_ECLAIR_ENV_OPTIONS}" \
+  -- "${SCRIPT_DIR}/../build.sh" "$1" | tee "${ECLAIR_BUILD_LOG}"
+
+
+# Create the project database.
+PROJECT_ECD="${ECLAIR_OUTPUT_DIR}/PROJECT.ecd"
+find "${ECLAIR_DATA_DIR}" -maxdepth 1 -name "FRAME.*.ecb" |
+  sort | xargs cat |
+  "${ECLAIR_BIN_DIR}eclair_report" \
+    "-create_db='${PROJECT_ECD}'" \
+    -load=/dev/stdin > "${ECLAIR_REPORT_LOG}" 2>&1
+
+# Create the Jenkins reports file.
+"${ECLAIR_BIN_DIR}eclair_report" \
+  "-db='${PROJECT_ECD}'" \
+  "-eval_file='${SCRIPT_DIR}/report.ecl'" \
+  >> "${ECLAIR_REPORT_LOG}" 2>&1
+
+"${SCRIPT_DIR}/print_analyzed_files.sh" "${PROJECT_ECD}" "${ECLAIR_OUTPUT_DIR}"
diff --git a/automation/eclair_analysis/ECLAIR/call_properties.ecl 
b/automation/eclair_analysis/ECLAIR/call_properties.ecl
new file mode 100644
index 0000000000..3f7794bf8b
--- /dev/null
+++ b/automation/eclair_analysis/ECLAIR/call_properties.ecl
@@ -0,0 +1,106 @@
+
+-call_properties+={"name(printk)", {"pointee_write(1..=never)", "taken()"}}
+-call_properties+={"name(debugtrace_printk)", {"pointee_write(1..=never)", 
"taken()"}}
+-call_properties+={"name(panic)", {"pointee_write(1..=never)", "taken()"}}
+-call_properties+={"macro(^domain_crash$)", {"pointee_write(2..=never)", 
"taken()"}}
+-call_properties+={"macro(^(g?d|mm_)?printk$)", {"pointee_write(2..=never)", 
"taken()"}}
+-call_properties+={"macro(^guest_bug_on_failed$)", {"pointee_write(1=never)", 
"taken()"}}
+-call_properties+={"macro(^spin_lock_init_prof$)", {"pointee_write(2=never)", 
"taken()"}}
+-call_properties+={"macro(^sched_test_func$)", {"pointee_write(1..=never)", 
"taken()"}}
+-call_properties+={"macro(^dev_(info|warn)$)", {"pointee_write(1..=never)", 
"taken()"}}
+-call_properties+={"macro(^PAGING_DEBUG$)", {"pointee_write(1..=never)", 
"taken()"}}
+-call_properties+={"macro(^ACPI_(WARNING|ERROR|INFO)$)", 
{"pointee_write(1..=never)", "taken()"}}
+-call_properties+={"name(fdt_get_property_by_offset_)", 
{"pointee_write(3=always)", "pointee_read(3=never)", "taken()"}}
+-call_properties+={"name(read_atomic_size)", {"pointee_write(2=always)", 
"pointee_read(2=never)", "taken()"}}
+-call_properties+={"name(device_tree_get_reg)", {"pointee_write(4..=always)", 
"pointee_read(4..=never)", "taken()"}}
+-call_properties+={"name(dt_get_range)", {"pointee_write(3..=always)", 
"pointee_read(3..=never)", "taken()"}}
+-call_properties+={"name(parse_static_mem_prop)", 
{"pointee_write(2..=always)", "pointee_read(2..=never)", "taken()"}}
+-call_properties+={"name(get_ttbr_and_gran_64bit)", 
{"pointee_write(1..2=always)", "pointee_read(1..2=never)", "taken()"}}
+-call_properties+={"name(hvm_emulate_init_once)", {"pointee_write(1=always)", 
"pointee_read(1=never)", "taken()"}}
+-call_properties+={"name(__vmread)", {"pointee_write(2=always)", 
"pointee_read(2=never)", "taken()"}}
+-call_properties+={"name(hvm_pci_decode_addr)", {"pointee_write(3=always)", 
"pointee_read(3=never)", "taken()"}}
+-call_properties+={"name(vpci_mmcfg_decode_addr)", {"pointee_write(3=always)", 
"pointee_read(3=never)", "taken()"}}
+-call_properties+={"name(x86emul_decode)", {"pointee_write(1=always)", 
"pointee_read(1=never)", "taken()"}}
+-call_properties+={"name(unmap_grant_ref)", {"pointee_write(2=always)", 
"pointee_read(2=never)", "taken()"}}
+-call_properties+={"name(arm_smmu_cmdq_build_cmd)", 
{"pointee_write(1=always)", "pointee_read(1=never)", "taken()"}}
+-call_properties+={"name(pci_size_mem_bar)", {"pointee_write(4=always)", 
"pointee_read(4=never)", "taken()"}}
+-call_properties+={"name(_hvm_read_entry)", {"pointee_write(2=always)", 
"pointee_read(2=never)", "taken()"}}
+-call_properties+={"name(hvm_map_guest_frame_rw)", {"pointee_write(3=always)", 
"pointee_read(3=never)", "taken()"}}
+-call_properties+={"name(guest_cpuid)", {"pointee_write(4=always)", 
"pointee_read(4=never)", "taken()"}}
+-call_properties+={"name(epte_get_entry_emt)", {"pointee_write(5=always)", 
"pointee_read(5=never)", "taken()"}}
+-call_properties+={"name(mcheck_mca_logout)", {"pointee_write(3=always)", 
"pointee_read(3=never)", "taken()"}}
+-call_properties+={"name(set_field_in_reg_u32)", {"pointee_write(5=always)", 
"pointee_read(5=never)", "taken()"}}
+-call_properties+={"name(alloc_affinity_masks)", {"pointee_write(1=always)", 
"pointee_read(1=never)", "taken()"}}
+-call_properties+={"name(xasprintf)", {"pointee_write(1=always)", 
"pointee_read(1=never)", "taken()"}}
+-call_properties+={"name(find_non_smt)", {"pointee_write(2=always)", 
"pointee_read(2=never)", "taken()"}}
+-call_properties+={"name(call_rcu)", {"pointee_write(1=always)", 
"pointee_read(1=never)", "taken()"}}
+-call_properties+={"name(getdomaininfo)", {"pointee_write(2=always)", 
"pointee_read(2=never)", "taken()"}}
+-call_properties+={"^MAPPING_(INSERT|SEARCH)\\(.*$", 
{"pointee_write(2..=always)", "pointee_read(2..=never)", "taken()"}}
+-call_properties+={"name(FormatDec)", {"pointee_write(2=always)", 
"pointee_read(2=never)", "taken()"}}
+-call_properties+={"name(FormatHex)", {"pointee_write(3=always)", 
"pointee_read(3=never)", "taken()"}}
+-call_properties+={"name(p2m_get_ioreq_server)", {"pointee_write(2=always)", 
"pointee_read(2=never)", "taken()"}}
+-call_properties+={"name(elf_memset_unchecked)", {"pointee_write(1=always)", 
"pointee_read(1=never)", "taken()"}}
+-call_properties+={"name(set_iommu_pte_present)", {"pointee_write(7=always)", 
"pointee_read(7=never)", "taken()"}}
+-call_properties+={"name(clear_iommu_pte_present)", 
{"pointee_write(4=always)", "pointee_read(4=never)", "taken()"}}
+-call_properties+={"name(vcpu_runstate_get)", {"pointee_write(2=always)", 
"pointee_read(2=never)", "taken()"}}
+-call_properties+={"name(va_start)", {"pointee_write(1=always)", 
"pointee_read(1=never)", "taken()"}}
+-call_properties+={"name(sgi_target_init)", {"pointee_write(1=always)", 
"pointee_read(1=never)", "taken()"}}
+-call_properties+={"name(get_hw_residencies)", {"pointee_write(2=always)", 
"pointee_read(2=never)", "taken()"}}
+-call_properties+={"name(x86_cpu_policy_to_featureset)", 
{"pointee_write(2=always)", "pointee_read(2=never)", "taken()"}}
+-call_properties+={"^simple_strtou?ll?\\(.*$", {"pointee_write(2=always)", 
"pointee_read(2=never)", "taken()"}}
+-call_properties+={"name(msi_compose_msg)", {"pointee_write(3=always)", 
"pointee_read(3=never)", "taken()"}}
+-call_properties+={"name(print_tainted)", {"pointee_write(1=always)", 
"pointee_read(1=never)", "taken()"}}
+-call_properties+={"name(get_hvm_registers)", {"pointee_write(3=always)", 
"pointee_read(3=never)", "taken()"}}
+-call_properties+={"name(x86_insn_modrm)", {"pointee_write(2..3=always)", 
"pointee_read(2..3=never)", "taken()"}}
+-call_properties+={"name(cpuid_count_leaf)", {"pointee_write(3=always)", 
"pointee_read(3=never)", "taken()"}}
+-call_properties+={"name(rcu_lock_remote_domain_by_id)", 
{"pointee_write(2=always)", "pointee_read(2=never)", "taken()"}}
+-call_properties+={"name(cpuid_count)", {"pointee_write(3..=always)", 
"pointee_read(3..=never)", "taken()"}}
+-call_properties+={"name(efi_boot_mem_unused)", {"pointee_write(1..=always)", 
"pointee_read(1..=never)", "taken()"}}
+-call_properties+={"name(collect_time_info)", {"pointee_write(2=always)", 
"pointee_read(2=never)", "taken()"}}
+-call_properties+={"name(setup_xstate_comp)", {"pointee_write(1=always)", 
"pointee_read(1=never)", "taken()"}}
+-call_properties+={"name(map_domain_gfn)", {"pointee_read(5=never)", 
"taken()"}}
+-call_properties+={"name(fdt_getprop)", {"pointee_read(4=never)", "taken()"}}
+-call_properties+={"name(fdt_get_name)", {"pointee_read(3=never)", "taken()"}}
+-call_properties+={"name(fdt_get_property)", {"pointee_read(4=never)", 
"taken()"}}
+-call_properties+={"name(pci_get_host_bridge_segment)", 
{"pointee_read(2=never)", "taken()"}}
+-call_properties+={"name(dt_get_property)", {"pointee_read(3=never)", 
"taken()"}}
+-call_properties+={"name(dt_property_read_u32)", {"pointee_read(3=never)", 
"taken()"}}
+-call_properties+={"name(dt_device_get_paddr)", {"pointee_read(3..4=never)", 
"taken()"}}
+-call_properties+={"name(get_evtchn_dt_property)", 
{"pointee_write(2..3=maybe)", "pointee_read(2..3=never)", "taken()"}}
+-call_properties+={"name(setup_chosen_node)", {"pointee_write(2..3=maybe)", 
"pointee_read(2..3=never)", "taken()"}}
+-call_properties+={"name(queue_remove_raw)", {"pointee_read(2=never)", 
"taken()"}}
+-call_properties+={"macro(^memset$)", {"pointee_write(1=always)", 
"pointee_read(1=never)", "taken()"}}
+-call_properties+={"macro(^va_start$)", {"pointee_write(1=always)", 
"pointee_read(1=never)", "taken()"}}
+-call_properties+={"macro(^memcmp$)", {"pointee_write(1..2=never)", "taken()"}}
+-call_properties+={"macro(^memcpy$)", {"pointee_write(1=always&&2..=never)", 
"pointee_read(1=never&&2..=always)", "taken()"}}
+
+-doc_begin="Property inferred as a consequence of the semantics of 
device_tree_get_reg"
+-call_properties+={"name(acquire_static_memory_bank)", 
{"pointee_write(4..=always)", "pointee_read(4..=never)", "taken()"}}
+-doc_end
+
+-doc_begin="Property inferred as a consequence of the semantics of dt_set_cell"
+-call_properties+={"name(set_interrupt)", {"pointee_write(1=always)", 
"pointee_read(1=never)", "taken()"}}
+-doc_end
+
+-doc_begin="Property inferred as a consequence of the semantics of 
__p2m_get_mem_access"
+-call_properties+={"name(p2m_get_mem_access)", {"pointee_write(3=always)", 
"pointee_read(3=never)", "taken()"}}
+-doc_end
+
+-doc_begin="This function has alternative definitions with props 
{write=always,read=never} and {write=never,read=never}"
+-call_properties+={"name(alloc_cpumask_var)", {"pointee_write(1=maybe)", 
"pointee_read(1=never)", "taken()"}}
+-doc_end
+
+-doc_begin="Property inferred as a consequence of the semantics of 
alloc_cpumask_var"
+-call_properties+={"name(xenctl_bitmap_to_cpumask)", 
{"pointee_write(1=always)", "pointee_read(1=never)", "taken()"}}
+-doc_end
+
+-doc_begin="The call to bitmap_and causes the pointee of dstp to be always 
written"
+-call_properties+={"^cpumask_(and|andnot|clear|copy|complement).*$", 
{"pointee_write(1=always)", "pointee_read(1=never)" "taken()"}}
+-call_properties+={"^bitmap_(andnot|complement|fill).*$", 
{"pointee_write(1=always)", "pointee_read(1=never)", "taken()"}}
+-doc_end
+
+-doc_begin="The .*copy_(to|from).* helpers all have a memcpy-like expectation 
that the destination is a copy of the source.
+Furthermore, their uses do initialize the involved variables as needed by 
futher uses in the caller."
+-call_properties+={"macro(^(__)?(raw_)?copy_from_(paddr|guest|compat)(_offset)?$)",
 {"pointee_write(1=always)", "pointee_read(1=never)", "taken()"}}
+-call_properties+={"macro(^(__)?copy_to_(guest|compat)(_offset)?$)", 
{"pointee_write(2=always)", "pointee_read(2=never)", "taken()"}}
+-doc_end
diff --git a/automation/eclair_analysis/ECLAIR/deviations.ecl 
b/automation/eclair_analysis/ECLAIR/deviations.ecl
new file mode 100644
index 0000000000..e1a06daf2f
--- /dev/null
+++ b/automation/eclair_analysis/ECLAIR/deviations.ecl
@@ -0,0 +1,298 @@
+### Set 1 ###
+
+#
+# Series 2.
+#
+
+-doc_begin="The compiler implementation guarantees that the unreachable code 
is removed.
+Constant expressions and unreachable branches of if and switch statements are 
expected."
+-config=MC3R1.R2.1,+reports={safe,"first_area(^.*has an invariantly.*$)"}
+-config=MC3R1.R2.1,+reports={safe,"first_area(^.*incompatible with labeled 
statement$)"}
+-doc_end
+
+-doc_begin="Some functions are intended to be not referenced."
+-config=MC3R1.R2.1,+reports={deliberate,"first_area(^.*is never referenced$)"}
+-doc_end
+
+-doc_begin="Unreachability in the following macros are expected and safe."
+-config=MC3R1.R2.1,statements+={safe,"macro(name(BUG||assert_failed||ERROR_EXIT||ERROR_EXIT_DOM||PIN_FAIL))"}
+-doc_end
+
+-doc_begin="Proving compliance with respect to Rule 2.2 is generally 
impossible:
+see https://arxiv.org/abs/2212.13933 for details. Moreover, peer review gives 
us
+confidence that no evidence of errors in the program's logic has been missed 
due
+to undetected violations of Rule 2.2, if any. Testing on time behavior gives us
+confidence on the fact that, should the program contain dead code that is not
+removed by the compiler, the resulting slowdown is negligible."
+-config=MC3R1.R2.2,reports+={disapplied,"any()"}
+-doc_end
+
+#
+# Series 3.
+#
+
+-doc_begin="Comments starting with '/*' and containing hyperlinks are safe as
+they are not instances of commented-out code."
+-config=MC3R1.R3.1,reports+={safe, "first_area(text(^.*https?://.*$))"}
+-doc_end
+
+#
+# Series 4.
+#
+
+-doc_begin="The directive has been accepted only for the ARM codebase."
+-config=MC3R1.D4.3,reports+={disapplied,"!(any_area(any_loc(file(^xen/arch/arm/arm64/.*$))))"}
+-doc_end
+
+-doc_begin="Depending on the compiler, rewriting the following function-like
+macros as inline functions is not guaranteed to have the same effect."
+-config=MC3R1.D4.9,macros+={deliberate,"name(likely)"}
+-config=MC3R1.D4.9,macros+={deliberate,"name(unlikely)"}
+-config=MC3R1.D4.9,macros+={deliberate,"name(unreachable)"}
+-doc_end
+
+-doc_begin="These macros can be used on both pointers and unsigned long type 
values."
+-config=MC3R1.D4.9,macros+={safe,"name(virt_to_maddr)"}
+-config=MC3R1.D4.9,macros+={safe,"name(virt_to_mfn)"}
+-doc_end
+
+-doc_begin="Rewriting variadic macros as variadic functions might have a 
negative impact on safety."
+-config=MC3R1.D4.9,macros+={deliberate,"variadic()"}
+-doc_end
+
+-doc_begin="Rewriting macros with arguments that are, in turn, arguments of
+__builtin_constant_p() can change the behavior depending on the optimization
+level."
+-config=MC3R1.D4.9,macro_argument_context+="skip_to(class(type||expr||decl,any),
+                                            call(name(__builtin_constant_p)))"
+-doc_end
+
+-doc_begin="Function-like macros defined in public headers are meant to be
+usable in C89 mode without any extensions. Hence they cannot be replaced by
+inline functions."
+-config=MC3R1.D4.9,macros+={deliberate, "loc(file(api:public))"}
+-doc_end
+
+-doc_begin="This header file is autogenerated or empty, therefore it poses no
+risk if included more than once."
+-file_tag+={empty_header, "^xen/arch/arm/efi/runtime\\.h$"}
+-file_tag+={autogen_headers, 
"^xen/include/xen/compile\\.h$||^xen/include/generated/autoconf.h$||^xen/include/xen/hypercall-defs.h$"}
+-config=MC3R1.D4.10,reports+={safe, 
"all_area(all_loc(file(empty_header||autogen_headers)))"}
+-doc_end
+
+-doc_begin="Files that are intended to be included more than once do not need 
to
+conform to the directive."
+-config=MC3R1.D4.10,reports+={safe, "first_area(text(^/\\* This file is 
legitimately included multiple times\\. \\*/$, begin-4))"}
+-config=MC3R1.D4.10,reports+={safe, "first_area(text(^/\\* Generated file, do 
not edit! \\*/$, begin-3))"}
+-doc_end
+
+#
+# Series 5.
+#
+
+-doc_begin="The project adopted the rule with an exception listed in
+'docs/misra/rules.rst'"
+-config=MC3R1.R5.3,reports+={safe, 
"any_area(any_loc(any_exp(macro(^READ_SYSREG$))&&any_exp(macro(^WRITE_SYSREG$))))"}
+-config=MC3R1.R5.3,reports+={safe, 
"any_area(any_loc(any_exp(macro(^max_t$))&&any_exp(macro(^min_t$))))"}
+-config=MC3R1.R5.3,reports+={safe, 
"any_area(any_loc(any_exp(macro(^read[bwlq]$))&&any_exp(macro(^read[bwlq]_relaxed$))))"}
+-config=MC3R1.R5.3,reports+={safe, 
"any_area(any_loc(any_exp(macro(^per_cpu$))&&any_exp(macro(^this_cpu$))))"}
+-doc_end
+
+-doc_begin="The identifier 'fdt' is a widely-used name, for which no suitable
+substitute can be found. It is understood in 'xen/arch/arm/efi-boot.h' that the
+static variable 'fdt' cannot be confused with parameter names of the function
+declarations that are present in the file."
+-file_tag+={efi_boot_h, "^xen/arch/arm/efi/efi-boot\\.h$"}
+-config=MC3R1.R5.3,reports+={deliberate, 
"any_area(decl(kind(var)&&static_storage()&&^fdt$)&&any_loc(file(efi_boot_h)))"}
+-doc_end
+
+-doc_begin="The identifier 'start' is a widely-used name, for which no suitable
+substitute can be found. It is understood in 'xen/include/xen/kernel.h' that 
the
+extern variable 'start' cannot be confused with omonymous parameter names of 
the
+function declarations where that variable is visible."
+-file_tag+={kernel_h, "^xen/include/xen/kernel\\.h$"}
+-config=MC3R1.R5.3,reports+={deliberate, 
"any_area(decl(kind(var)&&linkage(external)&&^start$)&&any_loc(file(kernel_h)))"}
+-doc_end
+
+-doc_begin="Function-like macros cannot be confused with identifiers that are
+neither functions nor pointers to functions."
+-config=MC3R1.R5.5,reports={safe,"all_area(decl(node(enum_decl||record_decl||field_decl||param_decl||var_decl)&&!type(canonical(address((node(function||function_no_proto))))))||macro(function_like()))"}
+-doc_end
+
+-doc_begin="The use of these identifiers for both macro names and other 
entities
+is deliberate and does not generate developer confusion."
+-config=MC3R1.R5.5,reports+={safe, 
"any_area(text(^\\s*/\\*\\s+SAF-[0-9]+-safe\\s+MC3R1\\.R5\\.5.*$, begin-1))"}
+-doc_end
+
+-doc_begin="The definition of macros and functions ending in '_bit' that use 
the
+same identifier in 'bitops.h' is deliberate and safe."
+-file_tag+={bitops_h, "^xen/arch/x86/include/asm/bitops\\.h$"}
+-config=MC3R1.R5.5,reports+={safe, 
"all_area((decl(^.*_bit\\(.*$)||macro(^.*_bit$))&&all_loc(file(bitops_h)))"}
+-doc_end
+
+-doc_begin="The definition of macros and functions beginning in 'str' or 'mem'
+that use the same identifier in 'xen/include/xen/string.h' is deliberate and
+safe."
+-file_tag+={string_h, "^xen/include/xen/string\\.h$"}
+-config=MC3R1.R5.5,reports+={safe, 
"any_area((decl(^(mem|str).*$)||macro(^(mem|str).*$))&&all_loc(file(string_h)))"}
+-doc_end
+
+#
+# Series 7.
+#
+
+-doc_begin="Usage of the following constants is safe, since they are given 
as-is
+in the inflate algorithm specification and there is therefore no risk of them
+being interpreted as decimal constants."
+-config=MC3R1.R7.1,literals={safe, 
"^0(007|37|070|213|236|300|321|330|331|332|333|334|335|337|371)$"}
+-doc_end
+
+-doc_begin="Violations in files that maintainers have asked to not modify in 
the
+context of R7.2."
+-file_tag+={adopted_r7_2,"^xen/include/xen/libfdt/.*$"}
+-file_tag+={adopted_r7_2,"^xen/arch/x86/include/asm/x86_64/efibind.h$"}
+-file_tag+={adopted_r7_2,"^xen/include/efi/efiapi\\.h$"}
+-file_tag+={adopted_r7_2,"^xen/include/efi/efidef\\.h$"}
+-file_tag+={adopted_r7_2,"^xen/include/efi/efiprot\\.h$"}
+-file_tag+={adopted_r7_2,"^xen/arch/x86/cpu/intel\\.c$"}
+-file_tag+={adopted_r7_2,"^xen/arch/x86/cpu/amd\\.c$"}
+-file_tag+={adopted_r7_2,"^xen/arch/x86/cpu/common\\.c$"}
+-config=MC3R1.R7.2,reports+={deliberate,"any_area(any_loc(file(adopted_r7_2)))"}
+-doc_end
+
+-doc_begin="Violations caused by __HYPERVISOR_VIRT_START are related to the
+particular use of it done in xen_mk_ulong."
+-config=MC3R1.R7.2,reports+={deliberate,"any_area(any_loc(macro(name(BUILD_BUG_ON))))"}
+-doc_end
+
+-doc_begin="The following string literals are assigned to pointers to non
+const-qualified char."
+-config=MC3R1.R7.4,reports+={safe, 
"any_area(text(^\\s*/\\*\\s+SAF-[0-9]+-safe\\s+MC3R1\\.R7\\.4.*$, begin-1))"}
+-doc_end
+
+-doc_begin="Allow pointers of non-character type as long as the pointee is
+const-qualified."
+-config=MC3R1.R7.4,same_pointee=false
+-doc_end
+
+#
+# Series 8.
+#
+
+-doc_begin="The following variables are compiled in multiple translation units
+belonging to different executables and therefore are safe."
+-config=MC3R1.R8.6,declarations+={safe, 
"name(current_stack_pointer||bsearch||sort)"}
+-doc_end
+
+-doc_begin="Declarations without definitions are allowed (specifically when the
+definition is compiled-out or optimized-out by the compiler)"
+-config=MC3R1.R8.6,reports+={deliberate, "first_area(^.*has no definition$)"}
+-doc_end
+
+-doc_begin="The gnu_inline attribute without static is deliberately allowed."
+-config=MC3R1.R8.10,declarations+={deliberate,"property(gnu_inline)"}
+-doc_end
+
+#
+# Series 9.
+#
+
+-doc_begin="The following variables are written before being set, therefore no
+access to uninitialized memory locations happens, as explained in the deviation
+comment."
+-config=MC3R1.R9.1,reports+={safe, 
"any_area(text(^\\s*/\\*\\s+SAF-[0-9]+-safe\\s+MC3R1\\.R9\\.1.*$, begin-1))"}
+-doc_end
+
+-doc_begin="Violations in files that maintainers have asked to not modify in 
the
+context of R9.1."
+-file_tag+={adopted_r9_1,"^xen/arch/arm/arm64/lib/find_next_bit\\.c$"}
+-config=MC3R1.R9.1,reports+={deliberate,"any_area(any_loc(file(adopted_r9_1)))"}
+-doc_end
+
+-doc_begin="The possibility of committing mistakes by specifying an explicit
+dimension is higher than omitting the dimension."
+-config=MC3R1.R9.5,reports+={deliberate, "any()"}
+-doc_end
+
+### Set 2 ###
+
+#
+# Series 10.
+#
+
+-doc_begin="The value-preserving conversions of integer constants are safe"
+-config=MC3R1.R10.1,etypes={safe,"any()","preserved_integer_constant()"}
+-config=MC3R1.R10.3,etypes={safe,"any()","preserved_integer_constant()"}
+-config=MC3R1.R10.4,etypes={safe,"any()","preserved_integer_constant()||sibling(rhs,preserved_integer_constant())"}
+-doc_end
+
+-doc_begin="Shifting non-negative integers to the right is safe."
+-config=MC3R1.R10.1,etypes+={safe,
+  "stmt(node(binary_operator)&&operator(shr))",
+  "src_expr(definitely_in(0..))"}
+-doc_end
+
+-doc_begin="Shifting non-negative integers to the left is safe if the result is
+still non-negative."
+-config=MC3R1.R10.1,etypes+={safe,
+  "stmt(node(binary_operator)&&operator(shl)&&definitely_in(0..))",
+  "src_expr(definitely_in(0..))"}
+-doc_end
+
+-doc_begin="Bitwise logical operations on non-negative integers are safe."
+-config=MC3R1.R10.1,etypes+={safe,
+  "stmt(node(binary_operator)&&operator(and||or||xor))",
+  "src_expr(definitely_in(0..))"}
+-doc_end
+
+-doc_begin="The implicit conversion to Boolean for logical operator arguments 
is well known to all Xen developers to be a comparison with 0"
+-config=MC3R1.R10.1,etypes+={safe, 
"stmt(operator(logical)||node(conditional_operator||binary_conditional_operator))",
 "dst_type(ebool||boolean)"}
+-doc_end
+
+### Set 3 ###
+
+#
+# Series 18.
+#
+
+-doc_begin="FIXME: explain why pointer differences involving this macro are 
safe."
+-config=MC3R1.R18.2,reports+={safe,"all_area(all_loc(any_exp(macro(^ACPI_PTR_DIFF$))))"}
+-doc_end
+
+-doc_begin="FIXME: explain why pointer differences involving this macro are 
safe."
+-config=MC3R1.R18.2,reports+={safe,"all_area(all_loc(any_exp(macro(^page_to_mfn$))))"}
+-doc_end
+
+-doc_begin="FIXME: explain why pointer differences involving this macro are 
safe."
+-config=MC3R1.R18.2,reports+={safe,"all_area(all_loc(any_exp(macro(^page_to_pdx$))))"}
+-doc_end
+
+#
+# Series 20.
+#
+
+-doc_begin="Code violating Rule 20.7 is safe when macro parameters are used: 
(1)
+as function arguments; (2) as macro arguments; (3) as array indices; (4) as lhs
+in assignments."
+-config=MC3R1.R20.7,expansion_context=
+{safe, "context(__call_expr_arg_contexts)"},
+{safe, "context(skip_to(__expr_non_syntactic_contexts, 
stmt_child(node(array_subscript_expr), subscript)))"},
+{safe, "context(skip_to(__expr_non_syntactic_contexts, 
stmt_child(operator(assign), lhs)))"},
+{safe, "left_right(^[(,\\[]$,^[),\\]]$)"}
+-doc_end
+
+#
+# Developer confusion
+#
+
+-doc="Selection for reports that are fully contained in adopted code."
+-report_selector+={adopted_report,"all_area(!kind(culprit||evidence)||all_loc(all_exp(adopted||pseudo)))"}
+
+-doc_begin="Adopted code is not meant to be read, reviewed or modified by human
+programmers:no developers' confusion is not possible. In addition, adopted code
+is assumed to work as is. Reports that are fully contained in adopted code are
+hidden/tagged with the 'adopted' tag."
+-service_selector={developer_confusion_guidelines,"^(MC3R1\\.R2\\.1|MC3R1\\.R2\\.2|MC3R1\\.R2\\.3|MC3R1\\.R2\\.4|MC3R1\\.R2\\.5|MC3R1\\.R2\\.6|MC3R1\\.R2\\.7|MC3R1\\.R4\\.1|MC3R1\\.R5\\.3|MC3R1\\.R5\\.6|MC3R1\\.R5\\.7|MC3R1\\.R5\\.8|MC3R1\\.R5\\.9|MC3R1\\.R7\\.1|MC3R1\\.R7\\.2|MC3R1\\.R7\\.3|MC3R1\\.R8\\.7|MC3R1\\.R8\\.8|MC3R1\\.R8\\.9|MC3R1\\.R8\\.11|MC3R1\\.R8\\.12|MC3R1\\.R8\\.13|MC3R1\\.R9\\.3|MC3R1\\.R9\\.4|MC3R1\\.R9\\.5|MC3R1\\.R10\\.2|MC3R1\\.R10\\.5|MC3R1\\.R10\\.6|MC3R1\\.R10\\.7|MC3R1\\.R10\\.8|MC3R1\\.R11\\.9|MC3R1\\.R12\\.1|MC3R1\\.R12\\.3|MC3R1\\.R12\\.4|MC3R1\\.R13\\.5|MC3R1\\.R14\\.1|MC3R1\\.R14\\.2|MC3R1\\.R14\\.3|MC3R1\\.R15\\.1|MC3R1\\.R15\\.2|MC3R1\\.R15\\.3|MC3R1\\.R15\\.4|MC3R1\\.R15\\.5|MC3R1\\.R15\\.6|MC3R1\\.R15\\.7|MC3R1\\.R16\\.1|MC3R1\\.R16\\.2|MC3R1\\.R16\\.3|MC3R1\\.R16\\.4|MC3R1\\.R16\\.5|MC3R1\\.R16\\.6|MC3R1\\.R16\\.7|MC3R1\\.R17\\.7|MC3R1\\.R17\\.8|MC3R1\\.R18\\.4|MC3R1\\.R18\\.5)$"
+}
+-config=developer_confusion_guidelines,reports+={relied,adopted_report}
+-doc_end
diff --git a/automation/eclair_analysis/ECLAIR/out_of_scope.ecl 
b/automation/eclair_analysis/ECLAIR/out_of_scope.ecl
new file mode 100644
index 0000000000..44db6997b5
--- /dev/null
+++ b/automation/eclair_analysis/ECLAIR/out_of_scope.ecl
@@ -0,0 +1,127 @@
+-doc_begin="Imported from Linux: ignore for now."
+-file_tag+={adopted,"^xen/common/libfdt/.*$"}
+-file_tag+={adopted,"^xen/include/xen/libfdt/.*$"}
+-file_tag+={adopted,"^xen/common/xz/.*$"}
+-file_tag+={adopted,"^xen/common/zstd/.*$"}
+-file_tag+={adopted,"^xen/drivers/acpi/apei/.*$"}
+-file_tag+={adopted,"^xen/drivers/acpi/tables/.*$"}
+-file_tag+={adopted,"^xen/drivers/acpi/utilities/.*$"}
+-file_tag+={adopted,"^xen/drivers/video/font_.*$"}
+-file_tag+={adopted,"^xen/arch/arm/arm64/cpufeature\\.c$"}
+-file_tag+={adopted,"^xen/arch/arm/arm64/insn\\.c$"}
+-file_tag+={adopted,"^xen/arch/arm/arm64/lib/find_next_bit\\.c$"}
+-file_tag+={adopted,"^xen/common/bitmap\\.c$"}
+-file_tag+={adopted,"^xen/common/bunzip2\\.c$"}
+-file_tag+={adopted,"^xen/common/earlycpio\\.c$"}
+-file_tag+={adopted,"^xen/common/inflate\\.c$"}
+-file_tag+={adopted,"^xen/common/lzo\\.c$"}
+-file_tag+={adopted,"^xen/common/lz4/decompress\\.c$"}
+-file_tag+={adopted,"^xen/common/radix-tree\\.c$"}
+-file_tag+={adopted,"^xen/common/ubsan/ubsan\\.c$"}
+-file_tag+={adopted,"^xen/drivers/acpi/hwregs\\.c$"}
+-file_tag+={adopted,"^xen/drivers/acpi/numa\\.c$"}
+-file_tag+={adopted,"^xen/drivers/acpi/osl\\.c$"}
+-file_tag+={adopted,"^xen/drivers/acpi/tables\\.c$"}
+-file_tag+={adopted,"^xen/lib/list-sort\\.c$"}
+-file_tag+={adopted,"^xen/lib/rbtree\\.c$"}
+-file_tag+={adopted,"^xen/lib/xxhash.*\\.c$"}
+-file_tag+={adopted,"^xen/arch/x86/acpi/boot\\.c$"}
+-file_tag+={adopted,"^xen/arch/x86/acpi/cpu_idle\\.c$"}
+-file_tag+={adopted,"^xen/arch/x86/acpi/cpufreq/cpufreq\\.c$"}
+-file_tag+={adopted,"^xen/arch/x86/acpi/cpuidle_menu\\.c$"}
+-file_tag+={adopted,"^xen/arch/x86/acpi/lib\\.c$"}
+-file_tag+={adopted,"^xen/arch/x86/cpu/amd\\.c$"}
+-file_tag+={adopted,"^xen/arch/x86/cpu/centaur\\.c$"}
+-file_tag+={adopted,"^xen/arch/x86/cpu/common\\.c$"}
+-file_tag+={adopted,"^xen/arch/x86/cpu/hygon\\.c$"}
+-file_tag+={adopted,"^xen/arch/x86/cpu/intel\\.c$"}
+-file_tag+={adopted,"^xen/arch/x86/cpu/intel_cacheinfo\\.c$"}
+-file_tag+={adopted,"^xen/arch/x86/cpu/mcheck/non-fatal\\.c$"}
+-file_tag+={adopted,"^xen/arch/x86/cpu/mtrr/.*$"}
+-file_tag+={adopted,"^xen/arch/x86/cpu/mwait-idle\\.c$"}
+-file_tag+={adopted,"^xen/arch/x86/delay\\.c$"}
+-file_tag+={adopted,"^xen/arch/x86/dmi_scan\\.c$"}
+-file_tag+={adopted,"^xen/arch/x86/mpparse\\.c$"}
+-file_tag+={adopted,"^xen/arch/x86/srat\\.c$"}
+-file_tag+={adopted,"^xen/arch/x86/time\\.c$"}
+-file_tag+={adopted,"^xen/arch/x86/x86_64/mmconf-fam10h\\.c$"}
+-doc_end
+
+-doc_begin="Intel specific source files are out of scope."
+-file_tag+={out_of_scope,"^xen/arch/x86/cpu/intel\\.c$"}
+-file_tag+={out_of_scope,"^xen/arch/x86/cpu/intel_cacheinfo\\.c$"}
+-file_tag+={out_of_scope,"^xen/arch/x86/cpu/microcode/intel\\.c$"}
+-file_tag+={out_of_scope,"^xen/arch/x86/cpu/shanghai\\.c$"}
+-file_tag+={out_of_scope,"^xen/arch/x86/hvm/vmx/.*$"}
+-file_tag+={out_of_scope,"^xen/arch/x86/include/asm/hvm/vmx/.*$"}
+-file_tag+={out_of_scope,"^xen/drivers/passthrough/vtd/.*$"}
+-file_tag+={out_of_scope,"^xen/arch/x86/cpu/mcheck/mce_intel\\.c$"}
+-file_tag+={out_of_scope,"^xen/arch/x86/cpu/mwait-idle\\.c$"}
+-file_tag+={out_of_scope,"^xen/arch/x86/cpu/vpmu_intel\\.c$"}
+-file_tag+={out_of_scope,"^xen/arch/x86/tsx\\.c$"}
+-file_tag+={out_of_scope,"^xen/arch/x86/mm/altp2m\\.c$"}
+-file_tag+={out_of_scope,"^xen/arch/x86/mm/p2m-ept\\.c$"}
+-file_tag+={out_of_scope,"^xen/arch/x86/mm/hap/nested_ept\\.c$"}
+-file_tag+={out_of_scope,"^xen/arch/x86/include/asm/altp2m\\.h$"}
+-file_tag+={out_of_scope,"^xen/arch/x86/include/asm/intel-family\\.h$"}
+-doc_end
+
+-doc_begin="Not in scope initially as it generates many violations and it is 
not enabled in safety configurations."
+-file_tag+={adopted,"^xen/xsm/flask/.*$"}
+-doc_end
+
+-doc_begin="unlz4.c implementation by Yann Collet, the others un* are from 
Linux, ignore for now."
+-file_tag+={adopted,"^xen/common/un.*\\.c$"}
+-doc_end
+
+-doc_begin="Origin is external and documented in xen/crypto/README.source ."
+-file_tag+={adopted,"^xen/crypto/.*$"}
+-doc_end
+
+-doc_begin="Files imported from the gnu-efi package"
+-file_tag+={adopted,"^xen/include/efi/.*$"}
+-file_tag+={adopted,"^xen/arch/x86/include/asm/x86_64/efibind\\.h$"}
+-doc_end
+
+-doc_begin="Build tools are out of scope."
+-file_tag+={out_of_scope_tools,"^xen/tools/.*$"}
+-file_tag+={out_of_scope_tools,"^xen/arch/x86/efi/mkreloc\\.c$"}
+-file_tag+={out_of_scope_tools,"^xen/arch/x86/boot/mkelf32\\.c$"}
+-doc_end
+
+-doc_begin="Out of scope headers."
+-file_tag+={out_of_scope,"^xen/include/xen/bitmap\\.h$"}
+-file_tag+={out_of_scope,"^xen/include/xen/earlycpio\\.h$"}
+-file_tag+={out_of_scope,"^xen/include/xen/lzo\\.h$"}
+-file_tag+={out_of_scope,"^xen/include/xen/lz4\\.h$"}
+-file_tag+={out_of_scope,"^xen/common/lz4/defs\\.h$"}
+-file_tag+={out_of_scope,"^xen/include/xen/radix-tree\\.h$"}
+-file_tag+={out_of_scope,"^xen/include/xen/list_sort\\.h$"}
+-file_tag+={out_of_scope,"^xen/include/xen/rbtree\\.h$"}
+-file_tag+={out_of_scope,"^xen/include/xen/xxhash\\.h$"}
+-doc_end
+
+-doc_begin="Headers under xen/include/public/ are the description of the public
+hypercall ABI so the community is extremely conservative in making changes
+there, because the interface is maintained for backward compatibility: ignore
+for now."
+-file_tag+={hypercall_ABI, "^xen/include/public/.*$"}
+-source_files+={hide, hypercall_ABI}
+-doc_end
+
+-doc_begin="Consider out-of-scope files external to the project."
+-file_tag+={external, out_of_scope}
+-doc_end
+
+-doc_begin="Consider adopted files external to the project."
+-file_tag+={external, adopted}
+-doc_end
+
+-doc_begin="Disregard out-of-scope tools."
+-frames+={hide,"main(out_of_scope_tools)"}
+-doc_end
+
+-doc_begin="The build performs speculative calls with target /dev/null: this
+frames should be ignored."
+-frames+={hide,"target(^/dev/null$)"}
+-doc_end
diff --git a/automation/eclair_analysis/ECLAIR/print_analyzed_files.sh 
b/automation/eclair_analysis/ECLAIR/print_analyzed_files.sh
new file mode 100755
index 0000000000..c19a8ecbd0
--- /dev/null
+++ b/automation/eclair_analysis/ECLAIR/print_analyzed_files.sh
@@ -0,0 +1,66 @@
+#!/bin/bash
+# Stop immediately if any executed command has exit status different from 0.
+set -eu
+
+script_name="$(basename "$0")"
+script_dir="$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd 
)"
+
+fatal() {
+  echo "${script_name}: $*" >&2
+  exit 1
+}
+
+usage() {
+  fatal "Usage: ${script_name} DATABASE OUT_DIR"
+}
+
+extrapolate_regex() {
+  lookbehind=$1
+  file=$2
+  grep -Po "(?<=${lookbehind}\"\\^).*(?=\\$\")" "${file}" | sed 's/\\\\/\\/'
+}
+
+if [ $# -lt 2 ]; then
+  usage
+fi
+
+DB=$1
+OUT_DIR=$2
+
+files_txt="${OUT_DIR}/files.txt"
+files_c_txt="${OUT_DIR}/files_c.txt"
+files_h_txt="${OUT_DIR}/files_h.txt"
+exclusions_txt="${OUT_DIR}/exclusions.txt"
+
+
+if [[ ! -d "${OUT_DIR}" ]]; then
+  mkdir -p "${OUT_DIR}"
+else
+  rm -f "${files_txt}"
+  rm -f "${files_c_txt}"
+  rm -f "${files_h_txt}"
+  rm -f "${exclusions_txt}"
+fi
+
+# Generating txt report with files
+"${ECLAIR_BIN_DIR}eclair_report" -db="${DB}" -files_txt="${files_txt}"
+
+{
+  # Extracting out of scope code
+  out_of_scope_ecl="${script_dir}/out_of_scope.ecl"
+  extrapolate_regex adopted,             "${out_of_scope_ecl}"
+  extrapolate_regex out_of_scope_tools,  "${out_of_scope_ecl}"
+  extrapolate_regex out_of_scope,        "${out_of_scope_ecl}"
+  extrapolate_regex hypercall_ABI,       "${out_of_scope_ecl}"
+  extrapolate_regex "hide, "             "${out_of_scope_ecl}"
+} >"${exclusions_txt}"
+sort -o "${exclusions_txt}" -u "${exclusions_txt}"
+
+# Removing exclusions from files_txt
+grep -E -v "(object: |/dev/pipe)" "${files_txt}" > "${files_txt}.tmp"
+grep -vf "${exclusions_txt}" "${files_txt}.tmp" > "${files_txt}"
+rm "${files_txt}.tmp"
+# Creating files with only headers
+grep -Ev "(xen.*\.(h\w+|[^h]\w*) |.*ecl)" "${files_txt}" > "${files_h_txt}"
+# Creating files with only c files
+grep -Ev "(xen.*\.(c\w+|[^c]\w*) |.*ecl)" "${files_txt}" > "${files_c_txt}"
diff --git a/automation/eclair_analysis/ECLAIR/public_APIs.ecl 
b/automation/eclair_analysis/ECLAIR/public_APIs.ecl
new file mode 100644
index 0000000000..9701a295e6
--- /dev/null
+++ b/automation/eclair_analysis/ECLAIR/public_APIs.ecl
@@ -0,0 +1,6 @@
+# Definition of the public APIs.
+
+-doc="All Xen public headers."
+-file_tag+={api:public,"^xen/include/public/.*\\.h$"}
+
+-public_files+=api:public
diff --git a/automation/eclair_analysis/ECLAIR/report.ecl 
b/automation/eclair_analysis/ECLAIR/report.ecl
new file mode 100644
index 0000000000..6ee324746c
--- /dev/null
+++ b/automation/eclair_analysis/ECLAIR/report.ecl
@@ -0,0 +1,4 @@
+# eclair_report
+
+reports_codeclimate("gl-code-quality-report.json")
+
diff --git a/automation/eclair_analysis/ECLAIR/tagging.ecl 
b/automation/eclair_analysis/ECLAIR/tagging.ecl
new file mode 100644
index 0000000000..ef2e56e186
--- /dev/null
+++ b/automation/eclair_analysis/ECLAIR/tagging.ecl
@@ -0,0 +1,34 @@
+-doc="Hide reports marked as compliant."
+-remap_rtag={compliant,hide}
+
+-doc="Hide reports marked as safe."
+-remap_rtag={safe,hide}
+
+-doc="Hide reports marked as relied."
+-remap_rtag={relied,hide}
+
+-doc="Hide reports marked as deliberate."
+-remap_rtag={deliberate,hide}
+
+-doc="Hide reports marked as disapplied."
+-remap_rtag={disapplied,hide}
+
+#######################
+# Accepted guidelines #
+#######################
+
+-doc="Accepted guidelines as reported in XEN/docs/misra/rules.rst"
+-service_selector={accepted_guidelines,"^(MC3R1\\.D1\\.1|MC3R1\\.D2\\.1|MC3R1\\.D4\\.3|MC3R1\\.D4\\.7|MC3R1\\.D4\\.10|MC3R1\\.D4\\.11|MC3R1\\.D4\\.14|MC3R1\\.R1\\.1|MC3R1\\.R1\\.3|MC3R1\\.R1\\.4|MC3R1\\.R2\\.1|MC3R1\\.R2\\.6|MC3R1\\.R2\\.2|MC3R1\\.R3\\.1|MC3R1\\.R3\\.2|MC3R1\\.R4\\.1|MC3R1\\.R4\\.2|MC3R1\\.R5\\.1|MC3R1\\.R5\\.2|MC3R1\\.R5\\.3|MC3R1\\.R5\\.4|MC3R1\\.R5\\.6|MC3R1\\.R6\\.1|MC3R1\\.R6\\.2|MC3R1\\.R7\\.1|MC3R1\\.R7\\.2|MC3R1\\.R7\\.3|MC3R1\\.R7\\.4|MC3R1\\.R8\\.1|MC3R1\\.R8\\.2|MC3R1\\.R8\\.3|MC3R1\\.R8\\.4|MC3R1\\.R8\\.5|MC3R1\\.R8\\.6|MC3R1\\.R8\\.8|MC3R1\\.R8\\.10|MC3R1\\.R8\\.12|MC3R1\\.R8\\.14|MC3R1\\.R9\\.1|MC3R1\\.R9\\.2|MC3R1\\.R9\\.3|MC3R1\\.R9\\.4|MC3R1\\.R9\\.5|MC3R1\\.R12\\.5|MC3R1\\.R13\\.6|MC3R1\\.R13\\.1|MC3R1\\.R14\\.1|MC3R1\\.R16\\.7|MC3R1\\.R17\\.3|MC3R1\\.R17\\.4|MC3R1\\.R17\\.6|MC3R1\\.R18\\.3|MC3R1\\.R19\\.1|MC3R1\\.R20\\.7|MC3R1\\.R20\\.13|MC3R1\\.R20\\.14|MC3R1\\.R21\\.13|MC3R1\\.R21\\.17|MC3R1\\.R21\\.18|MC3R1\\.R21\\.19|MC3R1\\.R21\\.20|MC3R1\\.R21\\.21|MC3R1\\.R22\\.2|MC3R1\\.R22\\.4|MC3R1\\.R22\\.5|MC3R1\\.R22\\.6)$"
+}
+-doc="All reports of accepted guidelines are tagged as accepted."
+-reports+={status:accepted,"service(accepted_guidelines)"}
+
+####################
+# Clean guidelines #
+####################
+
+-doc_begin="Clean guidelines: new violations for these guidelines are not 
accepted."
+-service_selector={clean_guidelines,"^(MC3R1\\.D1\\.1|MC3R1\\.D2\\.1|MC3R1\\.D4\\.11|MC3R1\\.D4\\.14|MC3R1\\.R1\\.4|MC3R1\\.R2\\.2|MC3R1\\.R3\\.2|MC3R1\\.R5\\.1|MC3R1\\.R5\\.2|MC3R1\\.R5\\.4|MC3R1\\.R6\\.1|MC3R1\\.R6\\.2|MC3R1\\.R7\\.1|MC3R1\\.R8\\.1|MC3R1\\.R8\\.5|MC3R1\\.R8\\.8|MC3R1\\.R8\\.10|MC3R1\\.R8\\.12|MC3R1\\.R8\\.14|MC3R1\\.R9\\.2|MC3R1\\.R9\\.4|MC3R1\\.R9\\.5|MC3R1\\.R12\\.5|MC3R1\\.R17\\.3|MC3R1\\.R17\\.6|MC3R1\\.R21\\.13|MC3R1\\.R21\\.19|MC3R1\\.R21\\.21|MC3R1\\.R22\\.2|MC3R1\\.R22\\.4|MC3R1\\.R22\\.5)$"
+}
+-reports+={clean:added,"service(clean_guidelines)"}
+-doc_end
diff --git a/automation/eclair_analysis/ECLAIR/toolchain.ecl 
b/automation/eclair_analysis/ECLAIR/toolchain.ecl
new file mode 100644
index 0000000000..e6cd289b5e
--- /dev/null
+++ b/automation/eclair_analysis/ECLAIR/toolchain.ecl
@@ -0,0 +1,275 @@
+# Compilers.
+-file_tag+={GCC_ARM64,"^/usr/bin/aarch64-linux-gnu-gcc-12$"}
+-file_tag+={GCC_X86_64,"^/usr/bin/x86_64-linux-gnu-gcc-12$"}
+
+# Manuals.
+-setq=GCC_MANUAL,"https://gcc.gnu.org/onlinedocs/gcc-12.1.0/gcc.pdf";
+-setq=CPP_MANUAL,"https://gcc.gnu.org/onlinedocs/gcc-12.1.0/cpp.pdf";
+-setq=ARM64_ABI_MANUAL,"https://github.com/ARM-software/abi-aa/blob/60a8eb8c55e999d74dac5e368fc9d7e36e38dda4/aapcs64/aapcs64.rst";
+-setq=X86_64_ABI_MANUAL,"https://gitlab.com/x86-psABIs/x86-64-ABI/-/jobs/artifacts/master/raw/x86-64-ABI/abi.pdf?job=build";
+-setq=ARM64_LIBC_MANUAL,"https://www.gnu.org/software/libc/manual/pdf/libc.pdf";
+-setq=X86_64_LIBC_MANUAL,"https://www.gnu.org/software/libc/manual/pdf/libc.pdf";
+-setq=C99_STD,"ISO/IEC 9899:1999"
+
+-doc_begin="
+    _Static_assert: see Section \"2.1 C Language\" of "GCC_MANUAL".
+    asm, __asm__: see Sections \"6.48 Alternate Keywords\" and \"6.47 How to 
Use Inline Assembly Language in C Code\" of "GCC_MANUAL".
+    __volatile__: see Sections \"6.48 Alternate Keywords\" and \"6.47.2.1 
Volatile\" of "GCC_MANUAL".
+    __const__, __inline__, __inline: see Section \"6.48 Alternate Keywords\" 
of "GCC_MANUAL".
+    typeof, __typeof__: see Section \"6.7 Referring to a Type with typeof\" of 
"GCC_MANUAL".
+    __alignof__, __alignof: see Sections \"6.48 Alternate Keywords\" and 
\"6.44 Determining the Alignment of Functions, Types or Variables\" of 
"GCC_MANUAL".
+    __attribute__: see Section \"6.39 Attribute Syntax\" of "GCC_MANUAL".
+    __builtin_types_compatible_p: see Section \"6.59 Other Built-in Functions 
Provided by GCC\" of "GCC_MANUAL".
+    __builtin_va_arg: non-documented GCC extension.
+    __builtin_offsetof: see Section \"6.53 Support for offsetof\" of 
"GCC_MANUAL".
+"
+-config=STD.tokenext,behavior+={c99, GCC_ARM64, 
"^(_Static_assert|asm|__asm__|__volatile__|__const__|__inline__|typeof|__typeof__|__alignof__|__attribute__|__builtin_types_compatible_p|__builtin_va_arg|__builtin_offsetof)$"}
+-config=STD.tokenext,behavior+={c99, GCC_X86_64, 
"^(_Static_assert|asm|__asm__|__volatile__|__const__|__inline__|__inline|typeof|__typeof__|__alignof__|__alignof|__attribute__|__builtin_types_compatible_p|__builtin_va_arg|__builtin_offsetof)$"}
+-doc_end
+
+-doc_begin="Non-documented GCC extension."
+-config=STD.emptinit,behavior+={c99,GCC_ARM64,specified}
+-config=STD.emptinit,behavior+={c99,GCC_X86_64,specified}
+#-config=STD.emptinit,behavior+={c18,GCC_X86_64,specified}
+-doc_end
+
+-doc_begin="See Section \"6.24 Arithmetic on void- and Function-Pointers\" of 
"GCC_MANUAL"."
+-config=STD.vptrarth,behavior+={c99,GCC_ARM64,specified}
+-config=STD.vptrarth,behavior+={c99,GCC_X86_64,specified}
+-doc_end
+
+-doc_begin="See Section \"6.1 Statements and Declarations in Expressions\" of 
"GCC_MANUAL"."
+-config=STD.stmtexpr,behavior+={c99,GCC_ARM64,specified}
+-config=STD.stmtexpr,behavior+={c99,GCC_X86_64,specified}
+-doc_end
+
+-doc_begin="See Section \"6.19 Structures with No Members\" of "GCC_MANUAL"."
+-config=STD.emptrecd,behavior+={c99,GCC_ARM64,specified}
+-config=STD.emptrecd,behavior+={c99,GCC_X86_64,specified}
+-doc_end
+
+-doc_begin="See Section \"6.18 Arrays of Length Zero\" of "GCC_MANUAL"."
+-config=STD.arayzero,behavior+={c99,GCC_ARM64,specified}
+-config=STD.arayzero,behavior+={c99,GCC_X86_64,specified}
+-doc_end
+
+-doc_begin="See Section \"6.8 Conditionals with Omitted Operands\" of 
"GCC_MANUAL"."
+-config=STD.bincondl,behavior+={c99,GCC_ARM64,specified}
+-config=STD.bincondl,behavior+={c99,GCC_X86_64,specified}
+-doc_end
+
+-doc_begin="See Section \"6.30 Case Ranges\" of "GCC_MANUAL"."
+-config=STD.caseuplw,behavior+={c99,GCC_ARM64,specified}
+-config=STD.caseuplw,behavior+={c99,GCC_X86_64,specified}
+-doc_end
+
+-doc_begin="See Section \"6.63 Unnamed Structure and Union Fields\" of 
"GCC_MANUAL"."
+-config=STD.anonfild,behavior+={c99,GCC_ARM64,specified}
+-config=STD.anonfild,behavior+={c99,GCC_X86_64,specified}
+-doc_end
+
+-doc_begin="Non-documented GCC extension."
+-config=STD.emptdecl,behavior+={c99,GCC_ARM64,specified}
+-config=STD.emptdecl,behavior+={c99,GCC_X86_64,specified}
+-doc_end
+
+-doc_begin="Non-documented GCC extension."
+-config=STD.emptenum,behavior+={c99,GCC_ARM64,specified}
+-doc_end
+
+-doc_begin="Non-documented GCC extension."
+-config=STD.pteincmp,behavior+={c99,GCC_ARM64,specified}
+-config=STD.pteincmp,behavior+={c99,GCC_X86_64,specified}
+#-config=STD.pteincmp,behavior+={c18,GCC_X86_64,specified}
+-doc_end
+
+-doc_begin="Non-documented GCC extension."
+-config=STD.funojptr,behavior+={c99,GCC_X86_64,specified}
+-doc_end
+
+-doc_begin="
+    ext_paste_comma: see Section \"6.21 Macros with a Variable Number of 
Arguments\" of "GCC_MANUAL".
+    ext_missing_varargs_arg: see Section \"6.21 Macros with a Variable Number 
of Arguments\" of "GCC_MANUAL".
+    ext_named_variadic_macro: see Section \"6.21 Macros with a Variable Number 
of Arguments\" of "GCC_MANUAL".
+    ext_return_has_void_expr: see the documentation for -Wreturn-type in 
Section \"3.8 Options to Request or Suppress Warnings\" of "GCC_MANUAL".
+    ext_gnu_statement_expr_macro: see Section \"6.1 Statements and 
Declarations in Expressions\" of "GCC_MANUAL".
+    ext_sizeof_alignof_void_type: see Section \"6.24 Arithmetic on void- and 
Function-Pointers\" of "GCC_MANUAL".
+    ext_forward_ref_enum_def: see Section \"6.49 Incomplete enum Types\" of 
"GCC_MANUAL".
+    ext_flexible_array_in_struct: see Section \"6.18 Arrays of Length Zero\" 
of "GCC_MANUAL".
+    ext_flexible_array_in_array: see Section \"6.18 Arrays of Length Zero\" of 
"GCC_MANUAL".
+    ext_enum_value_not_int: non-documented GCC extension.
+    ext_gnu_array_range: see Section \"6.29 Designated Initializers\" of 
"GCC_MANUAL".
+"
+-config=STD.diag,behavior+={c99,GCC_ARM64,"^(ext_paste_comma|ext_missing_varargs_arg|ext_named_variadic_macro|ext_return_has_void_expr|ext_gnu_statement_expr_macro|ext_sizeof_alignof_void_type|ext_forward_ref_enum_def|ext_gnu_array_range)$"}
+-config=STD.diag,behavior+={c99,GCC_X86_64,"^(ext_paste_comma|ext_missing_varargs_arg|ext_named_variadic_macro|ext_return_has_void_expr|ext_gnu_statement_expr_macro|ext_sizeof_alignof_void_type|ext_flexible_array_in_struct|ext_flexible_array_in_array|ext_enum_value_not_int|ext_gnu_array_range)$"}
+-doc_end
+
+-doc_begin="The maximum size of an object is defined in the MAX_SIZE macro, 
and for a 32 bit architecture is 8MB.
+    The maximum size for an array is defined in the PTRDIFF_MAX and in a 32 
bit architecture is 2^30-1.
+    See occurrences of these macros in "GCC_MANUAL"."
+-config=STD.byteobjt,behavior+={c99, GCC_ARM64, 8388608}
+-config=STD.byteobjt,behavior+={c99, GCC_X86_64, 8388608}
+-doc_end
+
+-doc_begin="See Section \"11.2 Implementation limits\" of "CPP_MANUAL"."
+-config=STD.charline,behavior+={c99, GCC_ARM64, 5000}
+-config=STD.charline,behavior+={c99, GCC_X86_64, 12000}
+-doc_end
+
+-doc_begin="See Section \"11.2 Implementation limits\" of "CPP_MANUAL"."
+-config=STD.inclnest,behavior+={c99, GCC_ARM64, 24}
+-config=STD.inclnest,behavior+={c99, GCC_X86_64, 32}
+-doc_end
+
+-doc_begin="FIXME: why is C90 used?"
+-config=STD.ppifnest,behavior+={c90, GCC_X86_64, 32}
+-doc_end
+
+-doc_begin="See Section \"4.12 Statements\" of "GCC_MANUAL"."
+-config=STD.caselimt,behavior+={c99, GCC_X86_64, 1500}
+-doc_end
+
+-doc_begin="See Section \"6.9 128-bit Integers\" of "GCC_MANUAL"."
+-config=STD.stdtypes,behavior+={c99, GCC_X86_64, "__uint128_t"}
+-doc_end
+
+-doc_begin="FIXME: Non-documented GCC extension?"
+-config=STD.charescp,behavior={c99, GCC_X86_64, "^m$"}
+-doc_end
+
+-doc_begin="See Section \"4.9 Structures, Unions, Enumerations, and 
Bit-Fields\" of "GCC_MANUAL"."
+-config=STD.bitfldtp, +behavior={c99, GCC_ARM64, "unsigned char;unsigned 
short;unsigned long;unsigned long long"}
+-config=STD.bitfldtp, +behavior={c99, GCC_X86_64, "unsigned char;unsigned 
short;unsigned long;enum"}
+-doc_end
+
+-doc_begin="
+    #pragma pack: see Section \"6.62.11 Structure-Layout Pragmas\" of 
"GCC_MANUAL".
+    #pragma GCC visibility: see Section \"6.62.14 Visibility Pragmas\" of 
"GCC_MANUAL".
+"
+-config=STD.nonstdc,behavior={c99, GCC_ARM64, "^(pack\\(|GCC visibility 
(push|pop)).*$"}
+-config=STD.nonstdc,behavior={c99, GCC_X86_64, "^(pack\\(|GCC visibility 
(push|pop)).*$"}
+-doc_end
+
+-doc_begin="See Section \"1.1 Character sets\" of "CPP_MANUAL".  We assume the 
locale is not restricting any UTF-8 characters being part of the source 
character set."
+-config=STD.charset,behavior={c99, GCC_ARM64, "utf8"}
+-doc_end
+
+-doc_begin="See Section \"4.3 Identifiers\" of "GCC_MANUAL"."
+-config=STD.extidsig, behavior+={c99, GCC_ARM64, "63"}
+-config=STD.extidsig, behavior+={c99, GCC_X86_64, "63"}
+-doc_end
+
+#
+# Documentation for relied-upon implementation-defined behaviors (Dir 1.1)
+#
+
+-doc_begin="See Section \"4.4 Characters\" of "GCC_MANUAL" and Section \"8.1 
Data types\" of "ARM64_ABI_MANUAL"."
+-config=STD.bytebits,behavior={c99, GCC_ARM64, "8"}
+-config=STD.charsobj,behavior={c99, GCC_ARM64, "utf8"}
+-config=STD.charsval,behavior={c99, GCC_ARM64, "utf8"}
+-doc_end
+
+-doc_begin="See Section \"4.4 Characters\" of "GCC_MANUAL" and Section \"3.1.2 
Data Representation\" of "X86_64_ABI_MANUAL"."
+-config=STD.bytebits,behavior={c99, GCC_X86_64, "8"}
+-config=STD.charsobj,behavior={c99, GCC_X86_64, "utf8"}
+-config=STD.charsval,behavior={c99, GCC_X86_64, "utf8"}
+-doc_end
+
+-doc_begin="See Section \"4.4 Characters\" of "GCC_MANUAL" and the 
documentation for -finput-charset=charset in the same manual."
+-config=STD.charsmap,behavior={c99, GCC_ARM64, "specified"}
+-config=STD.charsmap,behavior={c99, GCC_X86_64, "specified"}
+-doc_end
+
+-doc_begin="See Section \"4.4 Characters\" of "GCC_MANUAL" and the 
documentation for -fexec-charset=charset and -finput-charset=charset in the 
same manual."
+-config=STD.charsmem,behavior={c99, GCC_ARM64, "utf8"}
+-config=STD.charsmem,behavior={c99, GCC_X86_64, "utf8"}
+-doc_end
+
+-doc_begin="See Section \"4.1 Translation\" of "GCC_MANUAL"."
+-config=STD.diagidnt,behavior={c99, GCC_ARM64, "specified"}
+-config=STD.diagidnt,behavior={c99, GCC_X86_64, "specified"}
+-doc_end
+
+-doc_begin="See Section \"4.4 Characters\" of "GCC_MANUAL" and the 
documentation for -fexec-charset=charset in the same manual."
+-config=STD.execvals,behavior={c99, GCC_ARM64, "specified"}
+-config=STD.execvals,behavior={c99, GCC_X86_64, "specified"}
+-doc_end
+
+-doc_begin="Given that Xen is compiled in hosted mode, ECLAIR cannot exclude 
the independency from program termination implementation-defined behavior.  See 
\"Section 25.7 Program Termination\" of "ARM64_LIBC_MANUAL"."
+-config=STD.exitstat,behavior={c99, GCC_ARM64, "specified"}
+-doc_end
+
+-doc_begin="Given that Xen is compiled in hosted mode, ECLAIR cannot exclude 
the independency from program termination implementation-defined behavior.  See 
\"Section 25.7 Program Termination\" of "X86_64_LIBC_MANUAL"."
+-config=STD.exitstat,behavior={c99, GCC_X86_64, "specified"}
+-doc_end
+
+-doc_begin="See Chapter \"2 Header Files\" of "CPP_MANUAL"."
+-config=STD.inclangl,behavior={c99, GCC_ARM64, "specified"}
+-config=STD.inclangl,behavior={c99, GCC_X86_64, "specified"}
+-config=STD.inclfile,behavior={c99, GCC_ARM64, "specified"}
+-config=STD.inclfile,behavior={c99, GCC_X86_64, "specified"}
+-config=STD.inclhead,behavior={c99, GCC_ARM64, "specified"}
+-config=STD.inclhead,behavior={c99, GCC_X86_64, "specified"}
+-doc_end
+
+-doc_begin="See Section \"4.5 Integers\" of "GCC_MANUAL"."
+-config=STD.signdint,behavior={c99, GCC_ARM64, "specified"}
+-config=STD.signdint,behavior={c99, GCC_X86_64, "specified"}
+-doc_end
+
+-doc_begin="See Section \"4.15 Architecture\" of "GCC_MANUAL" and Chapter \"5  
 Data types and alignment\" of "ARM64_ABI_MANUAL"."
+-config=STD.objbytes,behavior={c99, GCC_ARM64, "specified"}
+-doc_end
+
+-doc_begin="See Section \"4.15 Architecture\" of "GCC_MANUAL" and Section 
\"3.1.2 Data Representation\" of "X86_64_ABI_MANUAL"."
+-config=STD.objbytes,behavior={c99, GCC_X86_64, "specified"}
+-doc_end
+
+-doc_begin="See Section \"3.4 Stringizing\" of "CPP_MANUAL"."
+-config=STD.stringfy,behavior={c99, GCC_ARM64, "specified"}
+-config=STD.stringfy,behavior={c99, GCC_X86_64, "specified"}
+-doc_end
+
+-doc_begin="See Section \"4.9 Structures, Unions, Enumerations, and 
Bit-Fields\"
+ of "GCC_MANUAL" and Section \"8.1.8 Bit-fields\" of "ARM64_ABI_MANUAL"."
+-config=STD.bitfldby,+behavior={c99, GCC_ARM64, "specified"}
+-config=STD.bitfldor,+behavior={c99, GCC_ARM64, "specified"}
+-doc_end
+
+-doc_begin="See Section \"4.9 Structures, Unions, Enumerations, and 
Bit-Fields\"
+ of "GCC_MANUAL" and Section \"3.1.2 Data Representation\" of 
"X86_64_ABI_MANUAL"."
+-config=STD.bitfldby,+behavior={c99, GCC_X86_64, "specified"}
+-config=STD.bitfldor,+behavior={c99, GCC_X86_64, "specified"}
+-doc_end
+
+-doc_begin="See Section \"4.10 Qualifiers\" of "GCC_MANUAL"."
+-config=STD.volatltp,+behavior={c99, GCC_ARM64, "specified"}
+-config=STD.volatltp,+behavior={c99, GCC_X86_64, "specified"}
+-doc_end
+
+-doc_begin="See Section \"4.15 Architecture\" of "GCC_MANUAL" and Chapter \"5  
 Data types and alignment\" of "ARM64_ABI_MANUAL"."
+-config=STD.stdmacro,behavior={c99, GCC_ARM64, "specified"}
+-doc_end
+
+-doc_begin="See Section \"4.15 Architecture\" of "GCC_MANUAL" and Section 
\"3.1.2 Data Representation\" of "X86_64_ABI_MANUAL"."
+-config=STD.stdmacro,behavior={c99, GCC_X86_64, "specified"}
+-doc_end
+
+-doc_begin="See Section \"4.4 Characters\" of "GCC_MANUAL" and Section \"11.1 
Implementation-defined behavior\" of "CPP_MANUAL"."
+-config=STD.widestng,behavior={c99, GCC_ARM64, "specified"}
+-config=STD.widestng,behavior={c99, GCC_X86_64, "specified"}
+-config=STD.multbtsl,behavior={c99, GCC_X86_64, "specified"}
+-doc_end
+
+-doc_begin="See Section \"4.13 Preprocessing Directives\" of "GCC_MANUAL" and 
Section \"7 Pragmas\" of "CPP_MANUAL"."
+-config=STD.pragmdir,behavior={c99, GCC_ARM64, "^(pack\\(|GCC visibility 
(push|pop)).*$"}
+-config=STD.pragmdir,behavior={c99, GCC_X86_64, "^(pack\\(|GCC visibility 
(push|pop)).*$"}
+-doc_end
+
+-doc_begin="See Section \"6.9 128-bit Integers\" of "GCC_MANUAL"."
+-config=STD.extinttp,behavior={c99, GCC_X86_64, "__uint128_t"}
+-doc_end
+
+-doc_begin="See Section \"4.13 Preprocessing Directives\" of "GCC_MANUAL" and 
Section \"11.1 Implementation-defined behavior\" of "CPP_MANUAL"."
+-config=STD.inclexpd,behavior={c99, GCC_X86_64, "specified"}
+-doc_end
-- 
2.34.1




 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.