[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [PATCH V4] xen: privcmd: Add support for irqfd
On 25.07.23 12:57, Viresh Kumar wrote: Xen provides support for injecting interrupts to the guests via the HYPERVISOR_dm_op() hypercall. The same is used by the Virtio based device backend implementations, in an inefficient manner currently. Generally, the Virtio backends are implemented to work with the Eventfd based mechanism. In order to make such backends work with Xen, another software layer needs to poll the Eventfds and raise an interrupt to the guest using the Xen based mechanism. This results in an extra context switch. This is not a new problem in Linux though. It is present with other hypervisors like KVM, etc. as well. The generic solution implemented in the kernel for them is to provide an IOCTL call to pass the interrupt details and eventfd, which lets the kernel take care of polling the eventfd and raising of the interrupt, instead of handling this in user space (which involves an extra context switch). This patch adds support to inject a specific interrupt to guest using the eventfd mechanism, by preventing the extra context switch. Inspired by existing implementations for KVM, etc.. Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx> --- V3->V4 - Drop the imported definitions to hvm/dm_op.h. - Make the caller pass a pointer to pre-filled "struct xen_dm_op" instance and get rid of irq and level fields. - Enable the irqfd feature under a new Kconfig entry. V2->V3 - Select EVENTFD from Kconfig V1->V2: - Improve error handling. - Remove the unnecessary usage of list_for_each_entry_safe(). - Restrict the use of XEN_DMOP_set_irq_level to only ARM64. - Import definitions from Xen to hvm/dm_op.h. drivers/xen/Kconfig | 8 ++ drivers/xen/privcmd.c | 286 ++++++++++++++++++++++++++++++++++++- include/uapi/xen/privcmd.h | 14 ++ 3 files changed, 306 insertions(+), 2 deletions(-) diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig index d5d7c402b651..c7fabfab4c20 100644 --- a/drivers/xen/Kconfig +++ b/drivers/xen/Kconfig @@ -269,6 +269,14 @@ config XEN_PRIVCMD disaggregated Xen setups this driver might be needed for other domains, too.+config XEN_PRIVCMD_IRQFD+ bool "Xen irqfd support" + depends on XEN_PRIVCMD && XEN_VIRTIO && EVENTFD + default m "m"? I guess you meant "n"? In this case the "default" line should just be dropped. + help + irqfd is a mechanism to inject a specific interrupt to a User VM using + a decoupled eventfd mechanism. I think the help text should mention "virtio". What about: "Using the irqfd mechanism a virtio backend running in a daemon can speed up interrupt injection into a guest." + config XEN_ACPI_PROCESSOR tristate "Xen ACPI processor" depends on XEN && XEN_PV_DOM0 && X86 && ACPI_PROCESSOR && CPU_FREQ diff --git a/drivers/xen/privcmd.c b/drivers/xen/privcmd.c index e2f580e30a86..584c8de56c5e 100644 --- a/drivers/xen/privcmd.c +++ b/drivers/xen/privcmd.c @@ -9,11 +9,16 @@#define pr_fmt(fmt) "xen:" KBUILD_MODNAME ": " fmt +#include <linux/eventfd.h>+#include <linux/file.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/mutex.h> +#include <linux/poll.h> #include <linux/sched.h> #include <linux/slab.h> #include <linux/string.h> +#include <linux/workqueue.h> #include <linux/errno.h> #include <linux/mm.h> #include <linux/mman.h> @@ -833,6 +838,267 @@ static long privcmd_ioctl_mmap_resource(struct file *file, return rc; }+#ifdef CONFIG_XEN_PRIVCMD_IRQFD+/* Irqfd support */ +static struct workqueue_struct *irqfd_cleanup_wq; +static DEFINE_MUTEX(irqfds_lock); +static LIST_HEAD(irqfds_list); + +struct privcmd_kernel_irqfd { + struct xen_dm_op_buf xbufs; + domid_t dom; + bool error; + struct eventfd_ctx *eventfd; + struct work_struct shutdown; + wait_queue_entry_t wait; + struct list_head list; + poll_table pt; +}; + +static void irqfd_deactivate(struct privcmd_kernel_irqfd *kirqfd) +{ + lockdep_assert_held(&irqfds_lock); + + list_del_init(&kirqfd->list); + queue_work(irqfd_cleanup_wq, &kirqfd->shutdown); +} + +static void irqfd_shutdown(struct work_struct *work) +{ + struct privcmd_kernel_irqfd *kirqfd = + container_of(work, struct privcmd_kernel_irqfd, shutdown); + u64 cnt; + + eventfd_ctx_remove_wait_queue(kirqfd->eventfd, &kirqfd->wait, &cnt); + eventfd_ctx_put(kirqfd->eventfd); + kfree(kirqfd); +} + +static void irqfd_inject(struct privcmd_kernel_irqfd *kirqfd) +{ + u64 cnt; + long rc; + + eventfd_ctx_do_read(kirqfd->eventfd, &cnt); + + xen_preemptible_hcall_begin(); + rc = HYPERVISOR_dm_op(kirqfd->dom, 1, &kirqfd->xbufs); + xen_preemptible_hcall_end(); + + /* Don't repeat the error message for consecutive failures */ + if (rc && !kirqfd->error) { + pr_err("Failed to configure irq for guest domain: %d\n", + kirqfd->dom); + } + + kirqfd->error = !!rc; No need for the "!!". +} + +static int +irqfd_wakeup(wait_queue_entry_t *wait, unsigned int mode, int sync, void *key) +{ + struct privcmd_kernel_irqfd *kirqfd = + container_of(wait, struct privcmd_kernel_irqfd, wait); + __poll_t flags = key_to_poll(key); + + if (flags & EPOLLIN) + irqfd_inject(kirqfd); + + if (flags & EPOLLHUP) { + mutex_lock(&irqfds_lock); + irqfd_deactivate(kirqfd); + mutex_unlock(&irqfds_lock); + } + + return 0; +} + +static void +irqfd_poll_func(struct file *file, wait_queue_head_t *wqh, poll_table *pt) +{ + struct privcmd_kernel_irqfd *kirqfd = + container_of(pt, struct privcmd_kernel_irqfd, pt); + + add_wait_queue_priority(wqh, &kirqfd->wait); +} + +static int privcmd_irqfd_assign(struct privcmd_irqfd *irqfd) +{ + struct privcmd_kernel_irqfd *kirqfd, *tmp; + struct eventfd_ctx *eventfd; + __poll_t events; + struct fd f; + void *dm_op; + int ret; + + kirqfd = kzalloc(sizeof(*kirqfd) + irqfd->size, GFP_KERNEL); + if (!kirqfd) + return -ENOMEM; + dm_op = kirqfd + 1; + + if (copy_from_user(dm_op, irqfd->dm_op, irqfd->size)) { + ret = -EFAULT; + goto error_kfree; + } + + kirqfd->xbufs.size = irqfd->size; + set_xen_guest_handle(kirqfd->xbufs.h, dm_op); + kirqfd->dom = irqfd->dom; + INIT_LIST_HEAD(&kirqfd->list); I don't think INIT_LIST_HEAD() is needed here. list_add_tail() doesn't require that. + INIT_WORK(&kirqfd->shutdown, irqfd_shutdown); + + f = fdget(irqfd->fd); + if (!f.file) { + ret = -EBADF; + goto error_kfree; + } + + eventfd = eventfd_ctx_fileget(f.file); + if (IS_ERR(eventfd)) { + ret = PTR_ERR(eventfd); + goto error_fd_put; + } + + kirqfd->eventfd = eventfd; I don't see why you need the local eventfd variable. + + /* + * Install our own custom wake-up handling so we are notified via a + * callback whenever someone signals the underlying eventfd. + */ + init_waitqueue_func_entry(&kirqfd->wait, irqfd_wakeup); + init_poll_funcptr(&kirqfd->pt, irqfd_poll_func); + + mutex_lock(&irqfds_lock); + + list_for_each_entry(tmp, &irqfds_list, list) { + if (kirqfd->eventfd == tmp->eventfd) { + ret = -EBUSY; + mutex_unlock(&irqfds_lock); + goto error_eventfd; + } + } + + list_add_tail(&kirqfd->list, &irqfds_list); + mutex_unlock(&irqfds_lock); + + /* + * Check if there was an event already pending on the eventfd before we + * registered, and trigger it as if we didn't miss it. + */ + events = vfs_poll(f.file, &kirqfd->pt); + if (events & EPOLLIN) + irqfd_inject(kirqfd); + + /* + * Do not drop the file until the kirqfd is fully initialized, otherwise + * we might race against the EPOLLHUP. + */ + fdput(f); + return 0; + +error_eventfd: + eventfd_ctx_put(eventfd); + +error_fd_put: + fdput(f); + +error_kfree: + kfree(kirqfd); + return ret; +} Juergen Attachment:
OpenPGP_0xB0DE9DD628BF132F.asc Attachment:
OpenPGP_signature.asc
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |