[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [PULL 31/41] hw/usb: spelling fixes
From: Michael Tokarev <mjt@xxxxxxxxxx> Signed-off-by: Michael Tokarev <mjt@xxxxxxxxxx> Message-ID: <20230823065335.1919380-14-mjt@xxxxxxxxxx> Signed-off-by: Philippe Mathieu-Daudé <philmd@xxxxxxxxxx> --- hw/usb/quirks.h | 2 +- hw/usb/ccid-card-emulated.c | 2 +- hw/usb/hcd-ehci.c | 6 +++--- hw/usb/hcd-ohci.c | 2 +- hw/usb/redirect.c | 2 +- hw/usb/xen-usb.c | 2 +- hw/usb/trace-events | 2 +- 7 files changed, 9 insertions(+), 9 deletions(-) diff --git a/hw/usb/quirks.h b/hw/usb/quirks.h index c3e595f40b..94b2c95341 100644 --- a/hw/usb/quirks.h +++ b/hw/usb/quirks.h @@ -67,7 +67,7 @@ static const struct usb_device_id usbredir_raw_serial_ids[] = { { USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */ { USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */ { USB_DEVICE(0x10C4, 0x8044) }, /* Cygnal Debug Adapter */ - { USB_DEVICE(0x10C4, 0x804E) }, /* Software Bisque Paramount ME build-in converter */ + { USB_DEVICE(0x10C4, 0x804E) }, /* Software Bisque Paramount ME built-in converter */ { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */ { USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */ { USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */ diff --git a/hw/usb/ccid-card-emulated.c b/hw/usb/ccid-card-emulated.c index c328660075..3ee9c73b87 100644 --- a/hw/usb/ccid-card-emulated.c +++ b/hw/usb/ccid-card-emulated.c @@ -518,7 +518,7 @@ static void emulated_realize(CCIDCardState *base, Error **errp) goto out2; } - /* TODO: a passthru backened that works on local machine. third card type?*/ + /* TODO: a passthru backend that works on local machine. third card type?*/ if (card->backend == BACKEND_CERTIFICATES) { if (card->cert1 != NULL && card->cert2 != NULL && card->cert3 != NULL) { ret = emulated_initialize_vcard_from_certificates(card); diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c index c930c60921..19b4534c20 100644 --- a/hw/usb/hcd-ehci.c +++ b/hw/usb/hcd-ehci.c @@ -1464,7 +1464,7 @@ static int ehci_process_itd(EHCIState *ehci, usb_handle_packet(dev, &ehci->ipacket); usb_packet_unmap(&ehci->ipacket, &ehci->isgl); } else { - DPRINTF("ISOCH: attempt to addess non-iso endpoint\n"); + DPRINTF("ISOCH: attempt to address non-iso endpoint\n"); ehci->ipacket.status = USB_RET_NAK; ehci->ipacket.actual_length = 0; } @@ -1513,7 +1513,7 @@ static int ehci_process_itd(EHCIState *ehci, /* This state is the entry point for asynchronous schedule - * processing. Entry here consitutes a EHCI start event state (4.8.5) + * processing. Entry here constitutes a EHCI start event state (4.8.5) */ static int ehci_state_waitlisthead(EHCIState *ehci, int async) { @@ -2458,7 +2458,7 @@ static void usb_ehci_vm_state_change(void *opaque, bool running, RunState state) /* * The schedule rebuilt from guest memory could cause the migration dest * to miss a QH unlink, and fail to cancel packets, since the unlinked QH - * will never have existed on the destination. Therefor we must flush the + * will never have existed on the destination. Therefore we must flush the * async schedule on savevm to catch any not yet noticed unlinks. */ if (state == RUN_STATE_SAVE_VM) { diff --git a/hw/usb/hcd-ohci.c b/hw/usb/hcd-ohci.c index cc5cde6983..7ff1b65ced 100644 --- a/hw/usb/hcd-ohci.c +++ b/hw/usb/hcd-ohci.c @@ -1355,7 +1355,7 @@ static uint32_t ohci_get_frame_remaining(OHCIState *ohci) if ((ohci->ctl & OHCI_CTL_HCFS) != OHCI_USB_OPERATIONAL) { return ohci->frt << 31; } - /* Being in USB operational state guarnatees sof_time was set already. */ + /* Being in USB operational state guarantees sof_time was set already. */ tks = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) - ohci->sof_time; if (tks < 0) { tks = 0; diff --git a/hw/usb/redirect.c b/hw/usb/redirect.c index 4bbf8afb33..c9893df867 100644 --- a/hw/usb/redirect.c +++ b/hw/usb/redirect.c @@ -471,7 +471,7 @@ static int bufp_alloc(USBRedirDevice *dev, uint8_t *data, uint16_t len, DPRINTF("bufpq overflow, dropping packets ep %02X\n", ep); dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 1; } - /* Since we're interupting the stream anyways, drop enough packets to get + /* Since we're interrupting the stream anyways, drop enough packets to get back to our target buffer size */ if (dev->endpoint[EP2I(ep)].bufpq_dropping_packets) { if (dev->endpoint[EP2I(ep)].bufpq_size > diff --git a/hw/usb/xen-usb.c b/hw/usb/xen-usb.c index 38ee660a30..09ec326aea 100644 --- a/hw/usb/xen-usb.c +++ b/hw/usb/xen-usb.c @@ -451,7 +451,7 @@ static int usbback_check_and_submit(struct usbback_req *usbback_req) wValue = le16_to_cpu(ctrl->wValue); /* - * When the device is first connected or resetted, USB device has no + * When the device is first connected or reset, USB device has no * address. In this initial state, following requests are sent to device * address (#0), * diff --git a/hw/usb/trace-events b/hw/usb/trace-events index 6bb9655c8d..ed7dc210d3 100644 --- a/hw/usb/trace-events +++ b/hw/usb/trace-events @@ -248,7 +248,7 @@ usb_set_device_feature(int addr, int feature, int ret) "dev %d, feature %d, ret # dev-hub.c usb_hub_reset(int addr) "dev %d" -usb_hub_control(int addr, int request, int value, int index, int length) "dev %d, req 0x%x, value %d, index %d, langth %d" +usb_hub_control(int addr, int request, int value, int index, int length) "dev %d, req 0x%x, value %d, index %d, length %d" usb_hub_get_port_status(int addr, int nr, int status, int changed) "dev %d, port %d, status 0x%x, changed 0x%x" usb_hub_set_port_feature(int addr, int nr, const char *f) "dev %d, port %d, feature %s" usb_hub_clear_port_feature(int addr, int nr, const char *f) "dev %d, port %d, feature %s" -- 2.41.0
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |