[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [PATCH v8 3/8] xen/arm: Fold mmu_init_secondary_cpu() to head.S
Currently mmu_init_secondary_cpu() only enforces the page table should not contain mapping that are both Writable and eXecutables after boot. To ease the arch/arm/mm.c split work, fold this function to head.S. For arm32, introduce an assembly macro pt_enforce_wxn. The macro is called before secondary CPUs jumping into the C world. For arm64, set the SCTLR_Axx_ELx_WXN flag right when the MMU is enabled. This would avoid the extra TLB flush and SCTLR dance. Signed-off-by: Henry Wang <Henry.Wang@xxxxxxx> Co-authored-by: Julien Grall <jgrall@xxxxxxxxxx> Signed-off-by: Julien Grall <jgrall@xxxxxxxxxx> --- v8: - Change the setting of SCTLR_Axx_ELx_WXN for arm64 to set the flag right when the MMU is enabled. v7: - No change. v6: - New patch. --- xen/arch/arm/arm32/head.S | 20 ++++++++++++++++++++ xen/arch/arm/arm64/mmu/head.S | 18 +++++++++++------- xen/arch/arm/include/asm/mm.h | 2 -- xen/arch/arm/mm.c | 6 ------ xen/arch/arm/smpboot.c | 2 -- 5 files changed, 31 insertions(+), 17 deletions(-) diff --git a/xen/arch/arm/arm32/head.S b/xen/arch/arm/arm32/head.S index 33b038e7e0..39218cf15f 100644 --- a/xen/arch/arm/arm32/head.S +++ b/xen/arch/arm/arm32/head.S @@ -83,6 +83,25 @@ isb .endm +/* + * Enforce Xen page-tables do not contain mapping that are both + * Writable and eXecutables. + * + * This should be called on each secondary CPU. + */ +.macro pt_enforce_wxn tmp + mrc CP32(\tmp, HSCTLR) + orr \tmp, \tmp, #SCTLR_Axx_ELx_WXN + dsb + mcr CP32(\tmp, HSCTLR) + /* + * The TLBs may cache SCTLR_EL2.WXN. So ensure it is synchronized + * before flushing the TLBs. + */ + isb + flush_xen_tlb_local \tmp +.endm + /* * Common register usage in this file: * r0 - @@ -254,6 +273,7 @@ secondary_switched: /* Use a virtual address to access the UART. */ mov_w r11, EARLY_UART_VIRTUAL_ADDRESS #endif + pt_enforce_wxn r0 PRINT("- Ready -\r\n") /* Jump to C world */ mov_w r2, start_secondary diff --git a/xen/arch/arm/arm64/mmu/head.S b/xen/arch/arm/arm64/mmu/head.S index 88075ef083..df06cefbbe 100644 --- a/xen/arch/arm/arm64/mmu/head.S +++ b/xen/arch/arm/arm64/mmu/head.S @@ -264,10 +264,11 @@ ENDPROC(create_page_tables) * Inputs: * x0 : Physical address of the page tables. * - * Clobbers x0 - x4 + * Clobbers x0 - x6 */ enable_mmu: mov x4, x0 + mov x5, x1 PRINT("- Turning on paging -\r\n") /* @@ -283,6 +284,7 @@ enable_mmu: mrs x0, SCTLR_EL2 orr x0, x0, #SCTLR_Axx_ELx_M /* Enable MMU */ orr x0, x0, #SCTLR_Axx_ELx_C /* Enable D-cache */ + orr x0, x0, x5 /* Enable extra flags */ dsb sy /* Flush PTE writes and finish reads */ msr SCTLR_EL2, x0 /* now paging is enabled */ isb /* Now, flush the icache */ @@ -297,16 +299,17 @@ ENDPROC(enable_mmu) * Inputs: * lr : Virtual address to return to. * - * Clobbers x0 - x5 + * Clobbers x0 - x6 */ ENTRY(enable_secondary_cpu_mm) - mov x5, lr + mov x6, lr load_paddr x0, init_ttbr ldr x0, [x0] + mov x1, #SCTLR_Axx_ELx_WXN /* Enable WxN from the start */ bl enable_mmu - mov lr, x5 + mov lr, x6 /* Return to the virtual address requested by the caller. */ ret @@ -320,14 +323,15 @@ ENDPROC(enable_secondary_cpu_mm) * Inputs: * lr : Virtual address to return to. * - * Clobbers x0 - x5 + * Clobbers x0 - x6 */ ENTRY(enable_boot_cpu_mm) - mov x5, lr + mov x6, lr bl create_page_tables load_paddr x0, boot_pgtable + mov x1, #0 /* No extra SCTLR flags */ bl enable_mmu /* @@ -337,7 +341,7 @@ ENTRY(enable_boot_cpu_mm) ldr x0, =1f br x0 1: - mov lr, x5 + mov lr, x6 /* * The 1:1 map may clash with other parts of the Xen virtual memory * layout. As it is not used anymore, remove it completely to diff --git a/xen/arch/arm/include/asm/mm.h b/xen/arch/arm/include/asm/mm.h index d25e59f828..163d22ecd3 100644 --- a/xen/arch/arm/include/asm/mm.h +++ b/xen/arch/arm/include/asm/mm.h @@ -214,8 +214,6 @@ extern void remove_early_mappings(void); /* Allocate and initialise pagetables for a secondary CPU. Sets init_ttbr to the * new page table */ extern int init_secondary_pagetables(int cpu); -/* Switch secondary CPUS to its own pagetables and finalise MMU setup */ -extern void mmu_init_secondary_cpu(void); /* * For Arm32, set up the direct-mapped xenheap: up to 1GB of contiguous, * always-mapped memory. Base must be 32MB aligned and size a multiple of 32MB. diff --git a/xen/arch/arm/mm.c b/xen/arch/arm/mm.c index b7eb3a6e08..923a90925c 100644 --- a/xen/arch/arm/mm.c +++ b/xen/arch/arm/mm.c @@ -326,12 +326,6 @@ void __init setup_pagetables(unsigned long boot_phys_offset) #endif } -/* MMU setup for secondary CPUS (which already have paging enabled) */ -void mmu_init_secondary_cpu(void) -{ - xen_pt_enforce_wnx(); -} - #ifdef CONFIG_ARM_32 /* * Set up the direct-mapped xenheap: diff --git a/xen/arch/arm/smpboot.c b/xen/arch/arm/smpboot.c index ec76de3cac..beb137d06e 100644 --- a/xen/arch/arm/smpboot.c +++ b/xen/arch/arm/smpboot.c @@ -361,8 +361,6 @@ void start_secondary(void) */ update_system_features(¤t_cpu_data); - mmu_init_secondary_cpu(); - gic_init_secondary_cpu(); set_current(idle_vcpu[cpuid]); -- 2.25.1
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |