|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [PATCH 2/2] xen/arm32: head: Improve logging in head.S
From: Julien Grall <jgrall@xxxxxxxxxx>
The sequence to enable the MMU on arm32 is quite complex as we may need
to jump to a temporary mapping to map Xen.
Recently, we had one bug in the logic (see f5a49eb7f8b3 ("xen/arm32:
head: Add mising isb in switch_to_runtime_mapping()") and it was
a pain to debug because there are no logging.
In order to improve the logging in the MMU switch we need to add
support for early printk while running on the identity mapping
and also on the temporary mapping.
For the identity mapping, we have only the first page of Xen mapped.
So all the strings should reside in the first page. For that purpose
a new macro PRINT_ID is introduced.
For the temporary mapping, the fixmap is already linked the temporary
area (and so does the UART). So we just need to update the register
storing the UART address (i.e. r11) to point to the UART temporary
mapping.
Take the opportunity to introduce mov_w_on_cond in order to
conditionally execute mov_w and avoid branches.
Signed-off-by: Julien Grall <jgrall@xxxxxxxxxx>
---
xen/arch/arm/arm32/head.S | 68 ++++++++++++++++++++-----
xen/arch/arm/include/asm/asm_defns.h | 6 ++-
xen/arch/arm/include/asm/early_printk.h | 3 ++
xen/arch/arm/include/asm/mmu/layout.h | 4 ++
xen/arch/arm/mm.c | 5 ++
xen/arch/arm/xen.lds.S | 1 +
6 files changed, 71 insertions(+), 16 deletions(-)
diff --git a/xen/arch/arm/arm32/head.S b/xen/arch/arm/arm32/head.S
index fec2433e568f..bd61521a9dea 100644
--- a/xen/arch/arm/arm32/head.S
+++ b/xen/arch/arm/arm32/head.S
@@ -46,9 +46,13 @@
* Move an immediate constant into a 32-bit register using movw/movt
* instructions.
*/
+.macro mov_w_on_cond cond, reg, word
+ movw\cond \reg, #:lower16:\word
+ movt\cond \reg, #:upper16:\word
+.endm
+
.macro mov_w reg, word
- movw \reg, #:lower16:\word
- movt \reg, #:upper16:\word
+ mov_w_on_cond al, \reg, \word
.endm
/*
@@ -104,16 +108,26 @@
*/
#ifdef CONFIG_EARLY_PRINTK
/*
- * Macro to print a string to the UART, if there is one.
+ * Macros to print a string to the UART, if there is one.
+ *
+ * There are multiple flavors:
+ * - PRINT_SECT(section, string): The @string will be located in @section
+ * - PRINT(): The string will be located in .rodata.str.
+ * - PRINT_ID(): When Xen is running on the Identity Mapping, it is
+ * only possible to have a limited amount of Xen. This will create
+ * the string in .rodata.idmap which will always be mapped.
*
* Clobbers r0 - r3
*/
-#define PRINT(_s) \
- mov r3, lr ;\
- adr_l r0, 98f ;\
- bl puts ;\
- mov lr, r3 ;\
- RODATA_STR(98, _s)
+#define PRINT_SECT(section, string) \
+ mov r3, lr ;\
+ adr_l r0, 98f ;\
+ bl puts ;\
+ mov lr, r3 ;\
+ RODATA_SECT(section, 98, string)
+
+#define PRINT(string) PRINT_SECT(.rodata.str, string)
+#define PRINT_ID(string) PRINT_SECT(.rodata.idmap, string)
/*
* Macro to print the value of register \rb
@@ -129,6 +143,7 @@
#else /* CONFIG_EARLY_PRINTK */
#define PRINT(s)
+#define PRINT_ID(s)
.macro print_reg rb
.endm
@@ -183,11 +198,6 @@ past_zImage:
bl check_cpu_mode
bl cpu_init
bl create_page_tables
- /* Add the UART mapping if requested */
-#ifdef CONFIG_EARLY_PRINTK
- mov_w r0, EARLY_UART_VIRTUAL_ADDRESS
- create_mapping_entry xen_fixmap, r0, r11, type=PT_DEV_L3
-#endif
/* Address in the runtime mapping to jump to after the MMU is enabled
*/
mov_w lr, primary_switched
@@ -593,6 +603,21 @@ enable_mmu:
mcr CP32(r0, HSCTLR) /* now paging is enabled */
isb /* Now, flush the icache */
+ /*
+ * At this stage, the UART address will depend on whether the
+ * temporary mapping was created or not.
+ *
+ * If it was, then the UART will be mapped in the temporary
+ * area. Otherwise, it will be mapped at runtime virtual
+ * mapping.
+ */
+#ifdef CONFIG_EARLY_PRINTK
+ teq r12, #1 /* Was the temporary mapping created? */
+ mov_w_on_cond eq, r11, TEMPORARY_EARLY_UART_VIRTUAL_ADDRESS
+ mov_w_on_cond ne, r11, EARLY_UART_VIRTUAL_ADDRESS
+#endif
+ PRINT_ID("- Paging turned on -\r\n")
+
/*
* The MMU is turned on and we are in the 1:1 mapping. Switch
* to the runtime mapping.
@@ -643,12 +668,14 @@ switch_to_runtime_mapping:
teq r12, #0
beq ready_to_switch
+ PRINT_ID("- Switching to the temporary mapping -\r\n")
/* We are still in the 1:1 mapping. Jump to the temporary Virtual
address. */
mov_w r0, 1f
add r0, r0, #XEN_TEMPORARY_OFFSET /* r0 := address in temporary
mapping */
mov pc, r0
1:
+ PRINT("- Running on the temporary mapping -\r\n")
/* Remove boot_second_id */
mov r2, #0
mov r3, #0
@@ -659,6 +686,8 @@ switch_to_runtime_mapping:
flush_xen_tlb_local r0
+ PRINT("- 1:1 mapping removed -\r\n")
+
/* Map boot_second into boot_pgtable */
mov_w r0, XEN_VIRT_START
create_table_entry boot_pgtable, boot_second, r0, 1
@@ -671,7 +700,10 @@ switch_to_runtime_mapping:
*/
isb
+ PRINT("- Runtime mapping mapped -\r\n")
ready_to_switch:
+ PRINT("- Jumping to runtime address -\r\n")
+
mov pc, lr
ENDPROC(switch_to_runtime_mapping)
@@ -795,6 +827,14 @@ init_uart:
early_uart_init r11, r1, r2
#endif
PRINT("- UART enabled -\r\n")
+
+ /*
+ * Add the UART mapping to the fixmap so the UART can be used
+ * as the MMU is on.
+ */
+ mov_w r0, EARLY_UART_VIRTUAL_ADDRESS
+ create_mapping_entry xen_fixmap, r0, r11, type=PT_DEV_L3
+
mov pc, lr
ENDPROC(init_uart)
diff --git a/xen/arch/arm/include/asm/asm_defns.h
b/xen/arch/arm/include/asm/asm_defns.h
index 29a9dbb002fa..ec803c0a370c 100644
--- a/xen/arch/arm/include/asm/asm_defns.h
+++ b/xen/arch/arm/include/asm/asm_defns.h
@@ -22,11 +22,13 @@
# error "unknown ARM variant"
#endif
-#define RODATA_STR(label, msg) \
-.pushsection .rodata.str, "aMS", %progbits, 1 ; \
+#define RODATA_SECT(section, label, msg) \
+.pushsection section, "aMS", %progbits, 1 ; \
label: .asciz msg; \
.popsection
+#define RODATA_STR(label, msg) RODATA_SECT(.rodata.str, label, msg)
+
#define ASM_INT(label, val) \
.p2align 2; \
label: .long (val); \
diff --git a/xen/arch/arm/include/asm/early_printk.h
b/xen/arch/arm/include/asm/early_printk.h
index c5149b2976da..c1e84f8b0009 100644
--- a/xen/arch/arm/include/asm/early_printk.h
+++ b/xen/arch/arm/include/asm/early_printk.h
@@ -19,6 +19,9 @@
#define EARLY_UART_VIRTUAL_ADDRESS \
(FIXMAP_ADDR(FIXMAP_CONSOLE) + (CONFIG_EARLY_UART_BASE_ADDRESS &
~PAGE_MASK))
+#define TEMPORARY_EARLY_UART_VIRTUAL_ADDRESS \
+ (TEMPORARY_FIXMAP_ADDR(FIXMAP_CONSOLE) + (CONFIG_EARLY_UART_BASE_ADDRESS &
~PAGE_MASK))
+
#endif /* !CONFIG_EARLY_PRINTK */
#endif
diff --git a/xen/arch/arm/include/asm/mmu/layout.h
b/xen/arch/arm/include/asm/mmu/layout.h
index da6be276ac5f..68855c4f3184 100644
--- a/xen/arch/arm/include/asm/mmu/layout.h
+++ b/xen/arch/arm/include/asm/mmu/layout.h
@@ -113,6 +113,10 @@
(TEMPORARY_AREA_FIRST_SLOT << XEN_PT_LEVEL_SHIFT(1)))
#define TEMPORARY_XEN_VIRT_START TEMPORARY_AREA_ADDR(XEN_VIRT_START)
+#define TEMPORARY_FIXMAP_VIRT_START TEMPORARY_AREA_ADDR(FIXMAP_VIRT_START)
+
+#define TEMPORARY_FIXMAP_ADDR(n) \
+ (TEMPORARY_FIXMAP_VIRT_START + (n) * PAGE_SIZE)
#else /* ARM_64 */
diff --git a/xen/arch/arm/mm.c b/xen/arch/arm/mm.c
index c34cc94c907a..6ffa45c53be6 100644
--- a/xen/arch/arm/mm.c
+++ b/xen/arch/arm/mm.c
@@ -193,7 +193,12 @@ static void __init __maybe_unused build_assertions(void)
#ifdef CONFIG_ARM_32
CHECK_SAME_SLOT(first, TEMPORARY_XEN_VIRT_START, DOMHEAP_VIRT_START);
CHECK_DIFFERENT_SLOT(first, XEN_VIRT_START, TEMPORARY_XEN_VIRT_START);
+ CHECK_SAME_SLOT(first, TEMPORARY_XEN_VIRT_START,
+ TEMPORARY_FIXMAP_VIRT_START);
+ CHECK_SAME_SLOT(first, TEMPORARY_XEN_VIRT_START,
+ TEMPORARY_FIXMAP_VIRT_START);
CHECK_SAME_SLOT(second, XEN_VIRT_START, TEMPORARY_XEN_VIRT_START);
+ CHECK_SAME_SLOT(second, FIXMAP_VIRT_START, TEMPORARY_FIXMAP_VIRT_START);
#endif
#undef CHECK_SAME_SLOT
diff --git a/xen/arch/arm/xen.lds.S b/xen/arch/arm/xen.lds.S
index 59b80d122fd0..20598c6963ce 100644
--- a/xen/arch/arm/xen.lds.S
+++ b/xen/arch/arm/xen.lds.S
@@ -35,6 +35,7 @@ SECTIONS
_idmap_start = .;
*(.text.header)
*(.text.idmap)
+ *(.rodata.idmap)
_idmap_end = .;
*(.text.cold)
--
2.40.1
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |