[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [PATCH v2 1/2] xen/arm32: head: Introduce enable_{boot,secondary}_cpu_mm()
All the MMU related functionality have been clubbed together in enable_boot_cpu_mm() for booting primary cpu and enable_secondary_cpu_mm() for booting secondary cpus. This is done in preparation for moving the code related to MMU in MMU specific file and in order to support non MMU cpus in future. This is based on d2f8df5b3ede commit. Signed-off-by: Ayan Kumar Halder <ayan.kumar.halder@xxxxxxx> --- Changes from :- v1 - 1. Added a proper commit message. 2. Some style and other fixes suggested in v1. xen/arch/arm/arm32/head.S | 89 +++++++++++++++++++++++++++++---------- 1 file changed, 67 insertions(+), 22 deletions(-) diff --git a/xen/arch/arm/arm32/head.S b/xen/arch/arm/arm32/head.S index 2d7e690bf5..7004443798 100644 --- a/xen/arch/arm/arm32/head.S +++ b/xen/arch/arm/arm32/head.S @@ -201,13 +201,11 @@ past_zImage: bl check_cpu_mode bl cpu_init - bl create_page_tables - /* Address in the runtime mapping to jump to after the MMU is enabled */ mov_w lr, primary_switched - b enable_mmu + b enable_boot_cpu_mm + primary_switched: - bl setup_fixmap #ifdef CONFIG_EARLY_PRINTK /* Use a virtual address to access the UART. */ mov_w r11, EARLY_UART_VIRTUAL_ADDRESS @@ -249,27 +247,11 @@ GLOBAL(init_secondary) #endif bl check_cpu_mode bl cpu_init - bl create_page_tables - /* Address in the runtime mapping to jump to after the MMU is enabled */ mov_w lr, secondary_switched - b enable_mmu -secondary_switched: - /* - * Non-boot CPUs need to move on to the proper pagetables, which were - * setup in prepare_secondary_mm. - * - * XXX: This is not compliant with the Arm Arm. - */ - mov_w r4, init_ttbr /* VA of HTTBR value stashed by CPU 0 */ - ldrd r4, r5, [r4] /* Actual value */ - dsb - mcrr CP64(r4, r5, HTTBR) - dsb - isb - flush_xen_tlb_local r0 - pt_enforce_wxn r0 + b enable_secondary_cpu_mm +secondary_switched: #ifdef CONFIG_EARLY_PRINTK /* Use a virtual address to access the UART. */ mov_w r11, EARLY_UART_VIRTUAL_ADDRESS @@ -692,6 +674,69 @@ ready_to_switch: mov pc, lr ENDPROC(switch_to_runtime_mapping) +/* + * Enable mm (turn on the data cache and the MMU) for secondary CPUs. + * The function will return to the virtual address provided in LR (e.g. the + * runtime mapping). + * + * Inputs: + * lr : Virtual address to return to. + * + * Clobbers r0 - r6 + */ +enable_secondary_cpu_mm: + mov r6, lr + + bl create_page_tables + + /* Address in the runtime mapping to jump to after the MMU is enabled */ + mov_w lr, 1f + b enable_mmu +1: + /* + * Non-boot CPUs need to move on to the proper pagetables, which were + * setup in prepare_secondary_mm. + * + * XXX: This is not compliant with the Arm Arm. + */ + mov_w r4, init_ttbr /* VA of HTTBR value stashed by CPU 0 */ + ldrd r4, r5, [r4] /* Actual value */ + dsb + mcrr CP64(r4, r5, HTTBR) + dsb + isb + flush_xen_tlb_local r0 + pt_enforce_wxn r0 + + /* Return to the virtual address requested by the caller. */ + mov pc, r6 +ENDPROC(enable_secondary_cpu_mm) + +/* + * Enable mm (turn on the data cache and the MMU) for the boot CPU. + * The function will return to the virtual address provided in LR (e.g. the + * runtime mapping). + * + * Inputs: + * lr : Virtual address to return to. + * + * Clobbers r0 - r6 + */ +enable_boot_cpu_mm: + mov r6, lr + + bl create_page_tables + + /* Address in the runtime mapping to jump to after the MMU is enabled */ + mov_w lr, 1f + b enable_mmu +1: + /* Return to the virtual address requested by the caller. */ + mov lr, r6 + + b setup_fixmap +ENDPROC(enable_boot_cpu_mm) + /* * Remove the 1:1 map from the page-tables. It is not easy to keep track * where the 1:1 map was mapped, so we will look for the top-level entry -- 2.25.1
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |