[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [PATCH for-8.3 v2 26/46] hw/net/lan9118: use qemu_configure_nic_device()
From: David Woodhouse <dwmw@xxxxxxxxxxxx> Some callers instantiate the device unconditionally, others will do so only if there is a NICInfo to go with it. This appears to be fairly random, but preseve the existing behaviour for now. Signed-off-by: David Woodhouse <dwmw@xxxxxxxxxxxx> --- hw/arm/kzm.c | 4 ++-- hw/arm/mps2.c | 2 +- hw/arm/realview.c | 6 ++---- hw/arm/vexpress.c | 4 ++-- hw/net/lan9118.c | 5 ++--- include/hw/net/lan9118.h | 2 +- 6 files changed, 10 insertions(+), 13 deletions(-) diff --git a/hw/arm/kzm.c b/hw/arm/kzm.c index 9be91ebeaa..2ccd6f8a76 100644 --- a/hw/arm/kzm.c +++ b/hw/arm/kzm.c @@ -113,8 +113,8 @@ static void kzm_init(MachineState *machine) alias_offset += ram[i].size; } - if (nd_table[0].used) { - lan9118_init(&nd_table[0], KZM_LAN9118_ADDR, + if (qemu_find_nic_info("lan9118", true, NULL)) { + lan9118_init(KZM_LAN9118_ADDR, qdev_get_gpio_in(DEVICE(&s->soc.avic), 52)); } diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index d92fd60684..cb3da1ef5c 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -458,7 +458,7 @@ static void mps2_common_init(MachineState *machine) /* In hardware this is a LAN9220; the LAN9118 is software compatible * except that it doesn't support the checksum-offload feature. */ - lan9118_init(&nd_table[0], mmc->ethernet_base, + lan9118_init(mmc->ethernet_base, qdev_get_gpio_in(armv7m, mmc->fpga_type == FPGA_AN511 ? 47 : 13)); diff --git a/hw/arm/realview.c b/hw/arm/realview.c index 6e7529d98f..1f88da3702 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -84,7 +84,6 @@ static void realview_init(MachineState *machine, SysBusDevice *busdev; qemu_irq pic[64]; PCIBus *pci_bus = NULL; - NICInfo *nd; DriveInfo *dinfo; I2CBus *i2c; int n; @@ -295,10 +294,9 @@ static void realview_init(MachineState *machine, } } - nd = qemu_find_nic_info(is_pb ? "lan9118" : "smc91c111", true, NULL); - if (nd) { + if (qemu_find_nic_info(is_pb ? "lan9118" : "smc91c111", true, NULL)) { if (is_pb) { - lan9118_init(nd, 0x4e000000, pic[28]); + lan9118_init(0x4e000000, pic[28]); } else { smc91c111_init(0x4e000000, pic[28]); } diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index 8ff37f52ca..4a6cb3bdf5 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -686,8 +686,8 @@ static void vexpress_common_init(MachineState *machine) memory_region_add_subregion(sysmem, map[VE_VIDEORAM], &vms->vram); /* 0x4e000000 LAN9118 Ethernet */ - if (nd_table[0].used) { - lan9118_init(&nd_table[0], map[VE_ETHERNET], pic[15]); + if (qemu_find_nic_info("lan9118", true, NULL)) { + lan9118_init(map[VE_ETHERNET], pic[15]); } /* VE_USB: not modelled */ diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index e5c4af182d..42fe5efd8c 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -1407,14 +1407,13 @@ static void lan9118_register_types(void) /* Legacy helper function. Should go away when machine config files are implemented. */ -void lan9118_init(NICInfo *nd, uint32_t base, qemu_irq irq) +void lan9118_init(uint32_t base, qemu_irq irq) { DeviceState *dev; SysBusDevice *s; - qemu_check_nic_model(nd, "lan9118"); dev = qdev_new(TYPE_LAN9118); - qdev_set_nic_properties(dev, nd); + qemu_configure_nic_device(dev, true, NULL); s = SYS_BUS_DEVICE(dev); sysbus_realize_and_unref(s, &error_fatal); sysbus_mmio_map(s, 0, base); diff --git a/include/hw/net/lan9118.h b/include/hw/net/lan9118.h index 3d0c67f339..4bf9da7a63 100644 --- a/include/hw/net/lan9118.h +++ b/include/hw/net/lan9118.h @@ -15,6 +15,6 @@ #define TYPE_LAN9118 "lan9118" -void lan9118_init(NICInfo *, uint32_t, qemu_irq); +void lan9118_init(uint32_t, qemu_irq); #endif -- 2.41.0
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |