|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [BUG]i2c_hid_acpi broken with 4.17.2 on Framework Laptop 13 AMD
Hello, Trying to get the Framework Laptop 13 AMD to work with QubesOS I hit the following Xen issue : Xen version : 4.17.2 Kernel : 6.5.12-300.fc39.x86_64 CPU model name : AMD Ryzen 7 7840U w/ Radeon 780M Graphics The touchpad is not working (not detected by evtest) because ( see below for XXXXXXX values) : [ 10.215870] i2c_hid_acpi i2c-FRMXXXXXXX: failed to reset device: -61 which is maybe related to the previous messages : [ 2.065750] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) ... [ 2.464598] amd_gpio AMDI0030:00: failed to enable wake-up interrupt QubesOS issue : https://github.com/QubesOS/qubes-issues/issues/8734 Possibly related issues : Here's the complete diff of dmesg with and without xen loaded up to the failed i2c_hid_acpi init : [ 0.000000] Command line: placeholder root=UUID=71b1dc59-ea00-484c-b5e4-ee77ede771db ro rhgb quiet [ 0.000000] Released 0 page(s) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: ACPI=0x5affe000 ACPI 2.0=0x5affe014 TPMFinalLog=0x5af3f000 SMBIOS=0x51677000 SMBIOS 3.0=0x51674000 (MEMATTR=0x4b719018 unusable) ESRT=0x5af9b018 MOKvar=0x5187c000 [ 0.000000] Hypervisor detected: Xen PV [ 0.026644] tsc: Detected 3294.105 MHz processor [ 0.026645] tsc: Detected 3293.856 MHz TSC [ 0.026732] MTRR map: 3 entries (0 fixed + 3 variable; max 16), built from 8 variable MTRRs [ 0.026733] MTRRs set to read-only [ 0.026735] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.026753] esrt: Reserving ESRT space from 0x000000005af9b018 to 0x000000005af9b050. [ 1.042047] ACPI: BGRT 0x000000005AFB8000 000038 (v01 INSYDE EDK2 00000002 ACPI 00040000) [ 1.042095] Setting APIC routing to Xen PV. [ 1.042116] NUMA turned off [ 1.101730] On node 0, zone DMA: 128 pages in unavailable ranges [ 1.136828] p2m virtual area at (____ptrval____), size is 40000000 [ 1.401457] Remapped 728641 page(s) [ 1.402499] Booting kernel on Xen [ 1.402500] Xen version: 4.17.2 (preserve-AD) [ 1.406607] xen: PV spinlocks enabled [ 1.406609] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.406610] Kernel command line: placeholder root=UUID=71b1dc59-ea00-484c-b5e4-ee77ede771db ro rhgb quiet [ 1.406661] Unknown kernel command line parameters "placeholder rhgb", will be passed to user space. [ 1.406867] random: crng init done [ 1.411447] Built 1 zonelists, mobility grouping on. Total pages: 15403418 [ 1.497107] Memory: 60184272K/62591736K available (18432K kernel code, 3267K rwdata, 14476K rodata, 4532K init, 17364K bss, 2407212K reserved, 0K cma-reserved) [ 1.508627] xen:events: Using FIFO-based ABI [ 1.508634] xen: --> pirq=1 -> irq=1 (gsi=1) [ 1.508636] xen: --> pirq=2 -> irq=2 (gsi=2) [ 1.508638] xen: --> pirq=3 -> irq=3 (gsi=3) [ 1.508639] xen: --> pirq=4 -> irq=4 (gsi=4) [ 1.508640] xen: --> pirq=5 -> irq=5 (gsi=5) [ 1.508642] xen: --> pirq=6 -> irq=6 (gsi=6) [ 1.508643] xen: --> pirq=7 -> irq=7 (gsi=7) [ 1.508644] xen: --> pirq=8 -> irq=8 (gsi=8) [ 1.508646] xen: --> pirq=9 -> irq=9 (gsi=9) [ 1.508647] xen: --> pirq=10 -> irq=10 (gsi=10) [ 1.508649] xen: --> pirq=11 -> irq=11 (gsi=11) [ 1.508650] xen: --> pirq=12 -> irq=12 (gsi=12) [ 1.508652] xen: --> pirq=13 -> irq=13 (gsi=13) [ 1.508653] xen: --> pirq=14 -> irq=14 (gsi=14) [ 1.508654] xen: --> pirq=15 -> irq=15 (gsi=15) [ 1.508913] printk: console [hvc0] enabled [ 1.543395] ACPI BIOS Warning (bug): Incorrect checksum in table [BGRT] - 0xC1, should be 0x4C (20230331/utcksum-58) [ 1.543432] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 1.543434] Xen: using vcpuop timer interface [ 1.543436] installing Xen timer for CPU 0 [ 1.543449] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2f7aa0787ee, max_idle_ns: 440795321263 ns [ 1.543452] Calibrating delay loop (skipped), value calculated using timer frequency.. 6587.71 BogoMIPS (lpj=3293856) [ 1.543485] Spectre V2 : Mitigation: Retpolines [ 1.543487] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.543489] Speculative Store Bypass: Vulnerable [ 1.543505] x86/fpu: Enabled xstate features 0xe7, context size is 2432 bytes, using 'compacted' format. [ 1.556516] cpu 0 spinlock event irq 57 [ 1.556526] VPMU disabled by hypervisor. [ 1.556812] Performance Events: PMU not available due to virtualization, using software events only. [ 1.559433] NMI watchdog: Perf NMI watchdog permanently disabled [ 1.559727] installing Xen timer for CPU 1 [ 1.559965] installing Xen timer for CPU 2 [ 1.560180] installing Xen timer for CPU 3 [ 1.560396] installing Xen timer for CPU 4 [ 1.560599] installing Xen timer for CPU 5 [ 1.560813] installing Xen timer for CPU 6 [ 1.561021] installing Xen timer for CPU 7 [ 1.561230] installing Xen timer for CPU 8 [ 1.561420] installing Xen timer for CPU 9 [ 1.561597] installing Xen timer for CPU 10 [ 1.561783] installing Xen timer for CPU 11 [ 1.561980] installing Xen timer for CPU 12 [ 1.562155] installing Xen timer for CPU 13 [ 1.562327] installing Xen timer for CPU 14 [ 1.562503] installing Xen timer for CPU 15 [ 1.562551] cpu 1 spinlock event irq 137 [ 1.562551] cpu 2 spinlock event irq 138 [ 1.562551] cpu 3 spinlock event irq 139 [ 1.562551] cpu 4 spinlock event irq 140 [ 1.562551] cpu 5 spinlock event irq 141 [ 1.562551] cpu 6 spinlock event irq 142 [ 1.562551] cpu 7 spinlock event irq 143 [ 1.562551] cpu 8 spinlock event irq 144 [ 1.563499] cpu 9 spinlock event irq 145 [ 1.563502] cpu 10 spinlock event irq 146 [ 1.563502] cpu 11 spinlock event irq 147 [ 1.563502] cpu 12 spinlock event irq 148 [ 1.563502] cpu 13 spinlock event irq 149 [ 1.563502] cpu 14 spinlock event irq 150 [ 1.563502] cpu 15 spinlock event irq 151 [ 1.573211] PM: RTC time: 09:08:20, date: 2023-12-03 [ 1.573947] xen:grant_table: Grant tables using version 1 layout [ 1.573958] Grant table initialized [ 1.574502] audit: type=2000 audit(1701594499.512:1): state=initialized audit_enabled=0 res=1 [ 1.606054] xen: registering gsi 9 triggering 0 polarity 1 [ 1.697597] xen: registering gsi 8 triggering 1 polarity 0 [ 1.697705] xen: registering gsi 13 triggering 1 polarity 0 [ 1.700360] xen: registering gsi 7 triggering 0 polarity 1 [ 1.700819] xen: registering gsi 10 triggering 1 polarity 0 [ 1.701110] xen: registering gsi 6 triggering 1 polarity 0 [ 1.701690] xen: registering gsi 50 triggering 0 polarity 1 [ 1.701706] xen: --> pirq=50 -> irq=50 (gsi=50) [ 1.701757] xen: registering gsi 51 triggering 0 polarity 1 [ 1.701768] xen: --> pirq=51 -> irq=51 (gsi=51) [ 1.701810] xen: registering gsi 52 triggering 0 polarity 1 [ 1.701818] xen: --> pirq=52 -> irq=52 (gsi=52) [ 1.701860] xen: registering gsi 53 triggering 0 polarity 1 [ 1.701869] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.707071] xen:balloon: Initialising balloon driver [ 1.743187] resource: Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 1.743524] sysfb: VRAM smaller than advertised [ 1.759417] hugetlbfs: disabling because there are no supported hugepage sizes [ 1.765826] xen: registering gsi 1 triggering 1 polarity 0 [ 1.771944] PM-Timer failed consistency check (0xffffff) - aborting. [ 1.775360] xen: registering gsi 40 triggering 0 polarity 1 [ 1.775387] xen: --> pirq=40 -> irq=40 (gsi=40) [ 1.775481] xen: registering gsi 37 triggering 0 polarity 1 [ 1.775494] xen: --> pirq=37 -> irq=37 (gsi=37) [ 1.775841] xen: registering gsi 38 triggering 0 polarity 1 [ 1.775855] xen: --> pirq=38 -> irq=38 (gsi=38) [ 1.776235] xen: registering gsi 40 triggering 0 polarity 1 [ 1.776238] Already setup the GSI :40 [ 1.776281] xen: registering gsi 46 triggering 0 polarity 1 [ 1.776293] xen: --> pirq=46 -> irq=46 (gsi=46) [ 1.776646] xen: registering gsi 47 triggering 0 polarity 1 [ 1.776656] xen: --> pirq=47 -> irq=47 (gsi=47) [ 1.777614] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f7aa0787ee, max_idle_ns: 440795321263 ns [ 1.777677] clocksource: Switched to clocksource tsc [ 2.061207] pcieport 0000:00:02.2: PME: Signaling with IRQ 162 [ 2.061369] pcieport 0000:00:02.4: PME: Signaling with IRQ 163 [ 2.061604] pcieport 0000:00:03.1: PME: Signaling with IRQ 164 [ 2.062263] pcieport 0000:00:04.1: PME: Signaling with IRQ 165 [ 2.062813] pcieport 0000:00:08.1: PME: Signaling with IRQ 166 [ 2.062953] xen: registering gsi 40 triggering 0 polarity 1 [ 2.062967] Already setup the GSI :40 [ 2.063063] pcieport 0000:00:08.2: PME: Signaling with IRQ 167 [ 2.063213] pcieport 0000:00:08.3: PME: Signaling with IRQ 168 [ 2.063345] efifb: probing for efifb [ 2.063985] efifb: No BGRT, not showing boot graphics [ 2.063986] efifb: framebuffer at 0x8800000000, using 13536k, total 13536k [ 2.063988] efifb: mode is 2256x1504x32, linelength=9216, pages=1 [ 2.063989] efifb: scrolling: redraw [ 2.063990] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.064032] fbcon: Deferring console take-over [ 2.064033] fb0: EFI VGA frame buffer device [ 2.065750] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 2.065860] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 2.066008] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 2.066140] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 2.066370] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 2.066586] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 2.066818] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 2.066923] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 2.067082] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 2.067170] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 2.067296] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 2.067473] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 2.067669] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 2.067973] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 2.068215] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 2.068522] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) [ 2.068923] ACPI: thermal: Thermal Zone [TZ00] (26 C) [ 2.069085] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 2.069242] ACPI: thermal: Thermal Zone [TZ02] (28 C) [ 2.069402] ACPI: thermal: Thermal Zone [TZ03] (46 C) [ 2.072038] hpet_acpi_add: no address or irqs in _CRS [ 2.092763] xen: registering gsi 37 triggering 0 polarity 1 [ 2.092769] Already setup the GSI :37 [ 2.101751] xen: registering gsi 38 triggering 0 polarity 1 [ 2.101755] Already setup the GSI :38 [ 2.105493] xen: registering gsi 46 triggering 0 polarity 1 [ 2.105496] Already setup the GSI :46 [ 2.109521] xen: registering gsi 47 triggering 0 polarity 1 [ 2.109525] Already setup the GSI :47 [ 2.116721] rtc_cmos 00:01: setting system clock to 2023-12-03T09:08:21 UTC (1701594501) [ 2.117134] amd_pstate: driver load is disabled, boot with specific mode to enable this [ 2.130271] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 2.138905] sched_clock: Marking stable (2104001974, 34790120)->(2142780210, -3988116) [ 2.464598] amd_gpio AMDI0030:00: failed to enable wake-up interrupt [ 2.465229] amd_gpio AMDI0030:00: failed to enable wake-up interrupt [ 2.465462] amd_gpio AMDI0030:00: failed to enable wake-up interrupt [ 2.465694] amd_gpio AMDI0030:00: failed to enable wake-up interrupt [ 2.466003] amd_gpio AMDI0030:00: failed to enable wake-up interrupt [ 2.466189] amd_gpio AMDI0030:00: failed to enable wake-up interrupt [ 2.466387] amd_gpio AMDI0030:00: failed to enable wake-up interrupt [ 2.466584] amd_gpio AMDI0030:00: failed to enable wake-up interrupt [ 3.790268] placeholder [ 3.809946] usb 1-2: New USB device found, idVendor=1e7d, idProduct=2e22, bcdDevice= 1.01 [ 3.809950] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.809952] usb 1-2: Product: ROCCAT Kone XTD [ 3.809953] usb 1-2: Manufacturer: ROCCAT [ 3.826019] systemd[1]: Detected virtualization vm-other. [ 3.941883] usb 1-4: new full-speed USB device number 3 using xhci_hcd [ 4.099853] usb 1-4: New USB device found, idVendor=27c6, idProduct=609c, bcdDevice= 1.00 [ 4.099862] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.099866] usb 1-4: Product: Goodix USB2.0 MISC [ 4.099869] usb 1-4: Manufacturer: Goodix Technology Co., Ltd. [ 4.099873] usb 1-4: SerialNumber: UIDD5F04A7B_XXXX_MOC_B0 [ 4.193119] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 4.221808] usb 1-5: new high-speed USB device number 4 using xhci_hcd [ 4.936497] xen: registering gsi 36 triggering 0 polarity 1 [ 4.936543] xen: --> pirq=36 -> irq=36 (gsi=36) [ 4.948276] ccp 0000:c1:00.2: tee: ring init command failed (0x00000005) [ 4.948285] ccp 0000:c1:00.2: tee: failed to init ring buffer [ 4.948287] ccp 0000:c1:00.2: tee initialization failed [ 4.948302] ccp 0000:c1:00.2: psp initialization failed [ 5.018031] fbcon: Taking over console [ 5.018181] Console: switching to colour frame buffer device 282x94 [ 10.215870] i2c_hid_acpi i2c-FRMW0005:00: failed to reset device: -61 [ 10.215917] i2c_hid_acpi i2c-PIXA3854:00: failed to reset device: -61 [ 10.215950] i2c_hid_acpi i2c-FRMW0004:00: failed to reset device: -61 [ 10.220217] i2c_hid_acpi i2c-FRMW0004:00: failed to change power setting. [ 16.359856] i2c_hid_acpi i2c-PIXA3854:00: failed to reset device: -61 [ 16.359856] i2c_hid_acpi i2c-FRMW0004:00: failed to reset device: -61 [ 16.359871] i2c_hid_acpi i2c-FRMW0005:00: failed to reset device: -61 [ 22.503879] i2c_hid_acpi i2c-FRMW0005:00: failed to reset device: -61 [ 22.503915] i2c_hid_acpi i2c-PIXA3854:00: failed to reset device: -61 [ 22.503921] i2c_hid_acpi i2c-FRMW0004:00: failed to reset device: -61 [ 28.647874] i2c_hid_acpi i2c-FRMW0005:00: failed to reset device: -61 [ 28.647879] i2c_hid_acpi i2c-PIXA3854:00: failed to reset device: -61 [ 28.647910] i2c_hid_acpi i2c-FRMW0004:00: failed to reset device: -61 [ 29.671873] i2c_hid_acpi i2c-FRMW0005:00: can't add hid device: -61 [ 29.671874] i2c_hid_acpi i2c-FRMW0004:00: can't add hid device: -61 [ 29.671874] i2c_hid_acpi i2c-PIXA3854:00: can't add hid device: -61 [ 29.686460] i2c_hid_acpi: probe of i2c-FRMW0005:00 failed with error -61 [ 29.686492] i2c_hid_acpi: probe of i2c-PIXA3854:00 failed with error -61 [ 29.686683] i2c_hid_acpi: probe of i2c-FRMW0004:00 failed with error -61 Sébastien
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |