Re: [RFC XEN PATCH v2 1/3] xen/vpci: Clear all vpci status of device

["Daniel P. Smith" <dpsmith@xxxxxxxxxxxxxxxxxxxx>]

V/r,
Daniel P. Smith
Apertus Solutions, LLC

On 12/4/23 06:10, Roger Pau Monné wrote:
> On Mon, Dec 04, 2023 at 06:57:03AM +0000, Chen, Jiqian wrote:
> > Hi Daniel P. Smith,
> >
> > On 2023/11/30 22:52, Roger Pau Monné wrote:
> > > On Thu, Nov 30, 2023 at 07:39:38AM -0500, Daniel P. Smith wrote:
> > > > On 11/30/23 07:25, Daniel P. Smith wrote:
> > > > > On 11/30/23 01:22, Chen, Jiqian wrote:
> > > > > > Hi Roger and Daniel P. Smith,
> > > > > >
> > > > > > On 2023/11/28 22:08, Roger Pau Monné wrote:
> > > > > > > On Fri, Nov 24, 2023 at 06:41:34PM +0800, Jiqian Chen wrote:
> > > > > > > > When a device has been reset on dom0 side, the vpci on Xen
> > > > > > > > side won't get notification, so the cached state in vpci is
> > > > > > > > all out of date compare with the real device state.
> > > > > > > > To solve that problem, this patch add new hypercall to clear
> > > > > > > > all vpci device state. And when reset device happens on dom0
> > > > > > > > side, dom0 can call this hypercall to notify vpci.
> > > > > > > >
> > > > > > > > Signed-off-by: Jiqian Chen <Jiqian.Chen@xxxxxxx>
> > > > > > > > Signed-off-by: Huang Rui <ray.huang@xxxxxxx>
> > > > > > > > ---
> > > > > > > >    xen/arch/x86/hvm/hypercall.c  |  1 +
> > > > > > > >    xen/drivers/passthrough/pci.c | 21 +++++++++++++++++++++
> > > > > > > >    xen/drivers/pci/physdev.c     | 14 ++++++++++++++
> > > > > > > >    xen/drivers/vpci/vpci.c       |  9 +++++++++
> > > > > > > >    xen/include/public/physdev.h  |  2 ++
> > > > > > > >    xen/include/xen/pci.h         |  1 +
> > > > > > > >    xen/include/xen/vpci.h        |  6 ++++++
> > > > > > > >    7 files changed, 54 insertions(+)
> > > > > > > >
> > > > > > > > diff --git a/xen/arch/x86/hvm/hypercall.c
> > > > > > > > b/xen/arch/x86/hvm/hypercall.c
> > > > > > > > index eeb73e1aa5..6ad5b4d5f1 100644
> > > > > > > > --- a/xen/arch/x86/hvm/hypercall.c
> > > > > > > > +++ b/xen/arch/x86/hvm/hypercall.c
> > > > > > > > @@ -84,6 +84,7 @@ long hvm_physdev_op(int cmd,
> > > > > > > > XEN_GUEST_HANDLE_PARAM(void) arg)
> > > > > > > >        case PHYSDEVOP_pci_mmcfg_reserved:
> > > > > > > >        case PHYSDEVOP_pci_device_add:
> > > > > > > >        case PHYSDEVOP_pci_device_remove:
> > > > > > > > +    case PHYSDEVOP_pci_device_state_reset:
> > > > > > > >        case PHYSDEVOP_dbgp_op:
> > > > > > > >            if ( !is_hardware_domain(currd) )
> > > > > > > >                return -ENOSYS;
> > > > > > > > diff --git a/xen/drivers/passthrough/pci.c
> > > > > > > > b/xen/drivers/passthrough/pci.c
> > > > > > > > index 04d00c7c37..f871715585 100644
> > > > > > > > --- a/xen/drivers/passthrough/pci.c
> > > > > > > > +++ b/xen/drivers/passthrough/pci.c
> > > > > > > > @@ -824,6 +824,27 @@ int pci_remove_device(u16 seg, u8 bus, u8 devfn)
> > > > > > > >        return ret;
> > > > > > > >    }
> > > > > > > > +int pci_reset_device_state(u16 seg, u8 bus, u8 devfn)
> > > > > > > You could use pci_sbdf_t here instead of 3 parameters.
> > > > > > Will change in next version, thank you.
> > > > > >
> > > > > > > I'm however unsure whether we really need this helper just to fetch
> > > > > > > the pdev and call vpci_reset_device_state(), I think you could place
> > > > > > > this logic directly in pci_physdev_op().  Unless there are plans to
> > > > > > > use such logic outside of pci_physdev_op().
> > > > > > If I place the logic of pci_reset_device_state directly in
> > > > > > pci_physdev_op. I think I need to declare vpci_reset_device_state in
> > > > > > pci.h? If it is suitable, I will change in next version.
> > > > > >
> > > > > > > > +{
> > > > > > > > +    struct pci_dev *pdev;
> > > > > > > > +    int ret = -ENODEV;
> > > > > > > Some XSM check should be introduced fro this operation, as none of the
> > > > > > > existing ones is suitable.  See xsm_resource_unplug_pci() for example.
> > > > > > >
> > > > > > > xsm_resource_reset_state_pci() or some such I would assume.
> > > > > > I don't know what I should do in XSM function(assume it is
> > > > > > xsm_resource_reset_state_pci).
> > > > > > Hi Daniel P. Smith, could you please give me some suggestions?
> > > > > > Just to check the XSM_PRIV action?
> > > > > Roger, thank you for seeing this and adding me in!
> > > > >
> > > > > Jiqian, I just wanted to let you know I have seen your post but I have
> > > > > been a little tied up this week. Just with the cursory look, I think
> > > > > Roger is suggesting a new XSM check/hook is warranted.
> > > > >
> > > > > If you would like to attempt at writing the dummy policy side, mimic
> > > > > xsm_resource_plug_pci in xen/include/xsm/dummy.h and
> > > > > xen/include/xsm/xsm.h, then I can look at handling the FLASK portion
> > > > > next week and provide it to you for inclusion into the series. If you
> > > > > are not comfortable with it, I can look at the whole thing next week.
> > > > > Just let me know what you would be comfortable with.
> > > > Apologies, thinking about for a moment and was thinking the hook should be
> > > > called xsm_resource_config_pci. I would reset as a config operation and
> > > > there might be new ones in the future. I do not believe there is a need to
> > > > have fine grain access control down to individual config operation, thus
> > > > they could all be captured under this one hook. Roger, what are your
> > > > thoughts about this, in particular how you see vpci evolving?
> > > So the configuration space reset should only be done by the domain
> > > that's also capable of triggering the physical device reset, usually
> > > the hardware domain.  I don't think it's possible ATM to allow a
> > > domain different than the hardware domain to perform a PCI reset, as
> > > doing it requires unmediated access to the PCI config space.
> > >
> > > So resetting the vPCI state should either be limited to the hardware
> > > domain, or to a pci reset capability explicitly
> > > (xsm_resource_reset_pci or some such?).  Or maybe
> > > xsm_resource_config_pci if that denotes unmediated access to the PCI
> > > config space.
> > >
> > > Thanks, Roger.
> > Is it like below that I need to add for XSM?
> > diff --git a/xen/xsm/dummy.c b/xen/xsm/dummy.c
> > index e6ffa948f7..7a289ba5d8 100644
> > --- a/xen/xsm/dummy.c
> > +++ b/xen/xsm/dummy.c
> > @@ -91,6 +91,7 @@ static const struct xsm_ops __initconst_cf_clobber dummy_ops 
> > = {
> >       .resource_plug_pci             = xsm_resource_plug_pci,
> >       .resource_unplug_pci           = xsm_resource_unplug_pci,
> >       .resource_setup_pci            = xsm_resource_setup_pci,
> > +    .resource_config_pci            = xsm_resource_config_pci,
> Now that I look at it, using the existing xsm_resource_setup_pci might
> be enough, no need to introduce a xsm_resource_config_pci.
Ack.