[PATCH v4 12/47] hw/mips/fuloong2e: use pci_init_nic_devices()

[David Woodhouse <dwmw2@xxxxxxxxxxxxx>]

From: David Woodhouse <dwmw@xxxxxxxxxxxx>

The previous behaviour was: *if* the first NIC specified on the command
line was an RTL8139 (or unspecified model) then it gets assigned to PCI
slot 7, which is where the Fuloong board had an RTL8139. All other
devices (including the first, if it was specified as anything other than
an rtl8319) get dynamically assigned on the bus.

The new behaviour is subtly different: If the first NIC was given a
specific model *other* than rtl8139, and a subsequent NIC was not,
then the rtl8139 (or unspecified) NIC will go to slot 7 and the rest
will be dynamically assigned.

Signed-off-by: David Woodhouse <dwmw@xxxxxxxxxxxx>
Reviewed-by: Thomas Huth <thuth@xxxxxxxxxx>
---
 hw/mips/fuloong2e.c | 16 +++-------------
 1 file changed, 3 insertions(+), 13 deletions(-)

diff --git a/hw/mips/fuloong2e.c b/hw/mips/fuloong2e.c
index 97b2c8ed8e..a45aac368c 100644
--- a/hw/mips/fuloong2e.c
+++ b/hw/mips/fuloong2e.c
@@ -201,19 +201,9 @@ static void main_cpu_reset(void *opaque)
 /* Network support */
 static void network_init(PCIBus *pci_bus)
 {
-    int i;
-
-    for (i = 0; i < nb_nics; i++) {
-        NICInfo *nd = &nd_table[i];
-        const char *default_devaddr = NULL;
-
-        if (i == 0 && (!nd->model || strcmp(nd->model, "rtl8139") == 0)) {
-            /* The Fuloong board has a RTL8139 card using PCI SLOT 7 */
-            default_devaddr = "07";
-        }
-
-        pci_nic_init_nofail(nd, pci_bus, "rtl8139", default_devaddr);
-    }
+    /* The Fuloong board has a RTL8139 card using PCI SLOT 7 */
+    pci_init_nic_in_slot(pci_bus, "rtl8139", NULL, "07");
+    pci_init_nic_devices(pci_bus, "rtl8139");
 }
 
 static void mips_fuloong2e_init(MachineState *machine)
-- 
2.43.0