[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [XEN PATCH v3 4/5] xen/arm: allow dynamically assigned SGI handlers
Updates so request_irq() can be used with a dynamically assigned SGI irq as input. This prepares for a later patch where an FF-A schedule receiver interrupt handler is installed for an SGI generated by the secure world. >From the Arm Base System Architecture v1.0C [1]: "The system shall implement at least eight Non-secure SGIs, assigned to interrupt IDs 0-7." gic_route_irq_to_xen() don't gic_set_irq_type() for SGIs since they are always edge triggered. gic_interrupt() is updated to route the dynamically assigned SGIs to do_IRQ() instead of do_sgi(). The latter still handles the statically assigned SGI handlers like for instance GIC_SGI_CALL_FUNCTION. [1] https://developer.arm.com/documentation/den0094/ Signed-off-by: Jens Wiklander <jens.wiklander@xxxxxxxxxx> --- v2->v3 - Rename GIC_SGI_MAX to GIC_SGI_STATIC_MAX and rename do_sgi() to do_static_sgi() - Update comment in setup_irq() to mention that SGI irq_desc is banked - Add ASSERT() in do_IRQ() that the irq isn't an SGI before injecting calling vgic_inject_irq() - Initialize local_irqs_type[] range for SGIs as IRQ_TYPE_EDGE_RISING - Adding link to the Arm Base System Architecture v1.0C v1->v2 - Update patch description as requested --- xen/arch/arm/gic.c | 12 +++++++----- xen/arch/arm/include/asm/gic.h | 2 +- xen/arch/arm/irq.c | 18 ++++++++++++++---- 3 files changed, 22 insertions(+), 10 deletions(-) diff --git a/xen/arch/arm/gic.c b/xen/arch/arm/gic.c index 44c40e86defe..882768252740 100644 --- a/xen/arch/arm/gic.c +++ b/xen/arch/arm/gic.c @@ -38,7 +38,7 @@ const struct gic_hw_operations *gic_hw_ops; static void __init __maybe_unused build_assertions(void) { /* Check our enum gic_sgi only covers SGIs */ - BUILD_BUG_ON(GIC_SGI_MAX > NR_GIC_SGI); + BUILD_BUG_ON(GIC_SGI_STATIC_MAX > NR_GIC_SGI); } void register_gic_ops(const struct gic_hw_operations *ops) @@ -117,7 +117,9 @@ void gic_route_irq_to_xen(struct irq_desc *desc, unsigned int priority) desc->handler = gic_hw_ops->gic_host_irq_type; - gic_set_irq_type(desc, desc->arch.type); + /* SGIs are always edge-triggered, so there is need to set it */ + if ( desc->irq >= NR_GIC_SGI) + gic_set_irq_type(desc, desc->arch.type); gic_set_irq_priority(desc, priority); } @@ -330,7 +332,7 @@ void gic_disable_cpu(void) gic_hw_ops->disable_interface(); } -static void do_sgi(struct cpu_user_regs *regs, enum gic_sgi sgi) +static void do_static_sgi(struct cpu_user_regs *regs, enum gic_sgi sgi) { struct irq_desc *desc = irq_to_desc(sgi); @@ -375,7 +377,7 @@ void gic_interrupt(struct cpu_user_regs *regs, int is_fiq) /* Reading IRQ will ACK it */ irq = gic_hw_ops->read_irq(); - if ( likely(irq >= 16 && irq < 1020) ) + if ( likely(irq >= GIC_SGI_STATIC_MAX && irq < 1020) ) { isb(); do_IRQ(regs, irq, is_fiq); @@ -387,7 +389,7 @@ void gic_interrupt(struct cpu_user_regs *regs, int is_fiq) } else if ( unlikely(irq < 16) ) { - do_sgi(regs, irq); + do_static_sgi(regs, irq); } else { diff --git a/xen/arch/arm/include/asm/gic.h b/xen/arch/arm/include/asm/gic.h index 03f209529b13..541f0eeb808a 100644 --- a/xen/arch/arm/include/asm/gic.h +++ b/xen/arch/arm/include/asm/gic.h @@ -285,7 +285,7 @@ enum gic_sgi { GIC_SGI_EVENT_CHECK, GIC_SGI_DUMP_STATE, GIC_SGI_CALL_FUNCTION, - GIC_SGI_MAX, + GIC_SGI_STATIC_MAX, }; /* SGI irq mode types */ diff --git a/xen/arch/arm/irq.c b/xen/arch/arm/irq.c index bcce80a4d624..d7306aa64d50 100644 --- a/xen/arch/arm/irq.c +++ b/xen/arch/arm/irq.c @@ -152,7 +152,13 @@ void __init init_IRQ(void) spin_lock(&local_irqs_type_lock); for ( irq = 0; irq < NR_LOCAL_IRQS; irq++ ) - local_irqs_type[irq] = IRQ_TYPE_INVALID; + { + /* SGIs are always edge-triggered */ + if ( irq < NR_GIC_SGI ) + local_irqs_type[irq] = DT_IRQ_TYPE_EDGE_RISING; + else + local_irqs_type[irq] = IRQ_TYPE_INVALID; + } spin_unlock(&local_irqs_type_lock); BUG_ON(init_local_irq_data(smp_processor_id()) < 0); @@ -224,9 +230,12 @@ void do_IRQ(struct cpu_user_regs *regs, unsigned int irq, int is_fiq) perfc_incr(irqs); - ASSERT(irq >= 16); /* SGIs do not come down this path */ + /* Statically assigned SGIs do not come down this path */ + ASSERT(irq >= GIC_SGI_STATIC_MAX); - if ( irq < 32 ) + if ( irq < NR_GIC_SGI ) + perfc_incr(ipis); + else if ( irq < NR_GIC_LOCAL_IRQS ) perfc_incr(ppis); else perfc_incr(spis); @@ -260,6 +269,7 @@ void do_IRQ(struct cpu_user_regs *regs, unsigned int irq, int is_fiq) * The irq cannot be a PPI, we only support delivery of SPIs to * guests. */ + ASSERT(irq >= NR_GIC_SGI); vgic_inject_irq(info->d, NULL, info->virq, true); goto out_no_end; } @@ -396,7 +406,7 @@ int setup_irq(unsigned int irq, unsigned int irqflags, struct irqaction *new) { gic_route_irq_to_xen(desc, GIC_PRI_IRQ); /* It's fine to use smp_processor_id() because: - * For PPI: irq_desc is banked + * For SGI and PPI: irq_desc is banked * For SPI: we don't care for now which CPU will receive the * interrupt * TODO: Handle case where SPI is setup on different CPU than -- 2.34.1
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |