[PATCH v2 8/8] xen/riscv: introduce early_fdt_map()

[Oleksii Kurochko <oleksii.kurochko@xxxxxxxxx>]

Introduce function which allows to map FDT to Xen.

Also, initialization of device_tree_flattened happens using early_fdt_map.

Signed-off-by: Oleksii Kurochko <oleksii.kurochko@xxxxxxxxx>
---
Changes in V2:
 - rework early_fdt_map to use map_pages_to_xen()
 - move call early_fdt_map() to C code after MMU is enabled.
---
 xen/arch/riscv/include/asm/mm.h |  2 ++
 xen/arch/riscv/mm.c             | 55 +++++++++++++++++++++++++++++++++
 xen/arch/riscv/setup.c          |  9 ++++++
 3 files changed, 66 insertions(+)

diff --git a/xen/arch/riscv/include/asm/mm.h b/xen/arch/riscv/include/asm/mm.h
index c54546c275..a12ef5bb63 100644
--- a/xen/arch/riscv/include/asm/mm.h
+++ b/xen/arch/riscv/include/asm/mm.h
@@ -266,4 +266,6 @@ static inline unsigned int arch_get_dma_bitsize(void)
 
 void setup_fixmap_mappings(void);
 
+void* early_fdt_map(paddr_t fdt_paddr);
+
 #endif /* _ASM_RISCV_MM_H */
diff --git a/xen/arch/riscv/mm.c b/xen/arch/riscv/mm.c
index 44f36359c8..428c26b636 100644
--- a/xen/arch/riscv/mm.c
+++ b/xen/arch/riscv/mm.c
@@ -1,13 +1,16 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 
+#include <xen/bootfdt.h>
 #include <xen/bug.h>
 #include <xen/compiler.h>
 #include <xen/init.h>
 #include <xen/kernel.h>
+#include <xen/libfdt/libfdt.h>
 #include <xen/macros.h>
 #include <xen/mm.h>
 #include <xen/pfn.h>
 #include <xen/sections.h>
+#include <xen/sizes.h>
 
 #include <asm/early_printk.h>
 #include <asm/csr.h>
@@ -435,3 +438,55 @@ inline pte_t mfn_to_xen_entry(mfn_t mfn, unsigned int attr)
 
     return mfn_to_pte(mfn);
 }
+
+void * __init early_fdt_map(paddr_t fdt_paddr)
+{
+    /* We are using 2MB superpage for mapping the FDT */
+    paddr_t base_paddr = fdt_paddr & XEN_PT_LEVEL_MAP_MASK(1);
+    paddr_t offset;
+    void *fdt_virt;
+    uint32_t size;
+    int rc;
+
+    /*
+     * Check whether the physical FDT address is set and meets the minimum
+     * alignment requirement. Since we are relying on MIN_FDT_ALIGN to be at
+     * least 8 bytes so that we always access the magic and size fields
+     * of the FDT header after mapping the first chunk, double check if
+     * that is indeed the case.
+     */
+    BUILD_BUG_ON(MIN_FDT_ALIGN < 8);
+    if ( !fdt_paddr || fdt_paddr % MIN_FDT_ALIGN )
+        return NULL;
+
+    /* The FDT is mapped using 2MB superpage */
+    BUILD_BUG_ON(BOOT_FDT_VIRT_START % SZ_2M);
+
+    rc = map_pages_to_xen(BOOT_FDT_VIRT_START, maddr_to_mfn(base_paddr),
+                          SZ_2M >> PAGE_SHIFT,
+                          PAGE_HYPERVISOR_RO | _PAGE_BLOCK);
+    if ( rc )
+        panic("Unable to map the device-tree.\n");
+
+    offset = fdt_paddr % XEN_PT_LEVEL_SIZE(1);
+    fdt_virt = (void *)BOOT_FDT_VIRT_START + offset;
+
+    if ( fdt_magic(fdt_virt) != FDT_MAGIC )
+        return NULL;
+
+    size = fdt_totalsize(fdt_virt);
+    if ( size > BOOT_FDT_VIRT_SIZE )
+        return NULL;
+
+    if ( (offset + size) > SZ_2M )
+    {
+        rc = map_pages_to_xen(BOOT_FDT_VIRT_START + SZ_2M,
+                              maddr_to_mfn(base_paddr + SZ_2M),
+                              SZ_2M >> PAGE_SHIFT,
+                              PAGE_HYPERVISOR_RO | _PAGE_BLOCK);
+        if ( rc )
+            panic("Unable to map the device-tree\n");
+    }
+
+    return fdt_virt;
+}
diff --git a/xen/arch/riscv/setup.c b/xen/arch/riscv/setup.c
index 13f0e8c77d..21628b7300 100644
--- a/xen/arch/riscv/setup.c
+++ b/xen/arch/riscv/setup.c
@@ -2,6 +2,7 @@
 
 #include <xen/bug.h>
 #include <xen/compile.h>
+#include <xen/device_tree.h>
 #include <xen/init.h>
 #include <xen/mm.h>
 
@@ -48,6 +49,14 @@ void __init noreturn start_xen(unsigned long bootcpu_id,
 
     setup_fixmap_mappings();
 
+    device_tree_flattened = early_fdt_map(dtb_addr);
+    if ( device_tree_flattened )
+        panic("Invalid device tree blob at physical address %#lx.\n"
+              "The DTB must be 8-byte aligned and must not exceed %lld "
+              "bytes in size.\n\n"
+              "Please check your bootloader.\n",
+              dtb_addr, BOOT_FDT_VIRT_SIZE);
+
     printk("All set up\n");
 
     for ( ;; )
-- 
2.45.2