[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[XEN PATCH v14 1/5] xen/pci: Add hypercall to support reset of pcidev


  • To: <xen-devel@xxxxxxxxxxxxxxxxxxxx>
  • From: Jiqian Chen <Jiqian.Chen@xxxxxxx>
  • Date: Tue, 3 Sep 2024 15:04:20 +0800
  • Arc-authentication-results: i=1; mx.microsoft.com 1; spf=pass (sender ip is 165.204.84.17) smtp.rcpttodomain=lists.xenproject.org smtp.mailfrom=amd.com; dmarc=pass (p=quarantine sp=quarantine pct=100) action=none header.from=amd.com; dkim=none (message not signed); arc=none (0)
  • Arc-message-signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector10001; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=XlGmQrhKjci9o9jmUzzgn/490yIpsScEMAu2suA8Qt0=; b=OmlS3+BthIXZxmNDk9L0YhqvVyVSNb4yqWFMnEWULD3n0jWtFiEKhHYkGZrL3SIpRgBreY96E2Rww8XG4kTAowpYZRS+b0yveCx8/6aC7n28Ey4PJrXCKX1aqUo02A0xfDp7jpmFuDexUU5QA2X9v2v62Eaerx1Ym/zE0898/ejzLYyUQVc3eBoMzBmxAQVfhMi0BSsFFUWnuQj+uMKcE66nIxC11yr4IKBQc49/lINNZPznHWH6QBZp+wKtiGtEGWnDLBtBt4BCEj88SOgOejT1qjV+C3EhP/+z1x8GkiPuPgDpCcyjL9kRBMvwbXF3/um7xokTBL/Vodd3DeUX0A==
  • Arc-seal: i=1; a=rsa-sha256; s=arcselector10001; d=microsoft.com; cv=none; b=BFIOY5PDbm2IJ2Bc68LT0KV8N2P/rB4mcwJBaHdGlqBBt/wmhEYDm6/2ICmg0vr8CyaoNmf4a7qUF7hL/3EXO0yjUT4MGBWdbOf7V8H0V8qmSHuhhNrjjdO6zShAxvZ/0YED/uWDGOU+aEE+N5wWrGxBxTKhSs0RzMQcDmABqXJqpdavwQslE+obkWiNF7TiNWLR0GgcdMhUtkSdhUDpuJIwg7fzIxs87XwjigKsAA+KWs2OxVzV+ZLFs5ULoHk4g84Bza5FlpYlq07RFwEwZhZemrLUw2Yd8iFtHv8X92w2Wvl3cJovCp1qDBe03Yk5flFLwdTtY+mXyE2Eu8Jj+A==
  • Cc: Jan Beulich <jbeulich@xxxxxxxx>, Andrew Cooper <andrew.cooper3@xxxxxxxxxx>, Roger Pau Monné <roger.pau@xxxxxxxxxx>, Wei Liu <wl@xxxxxxx>, George Dunlap <gwd@xxxxxxxxxxxxxx>, Julien Grall <julien@xxxxxxx>, Stefano Stabellini <sstabellini@xxxxxxxxxx>, Anthony PERARD <anthony@xxxxxxxxxxxxxx>, "Juergen Gross" <jgross@xxxxxxxx>, "Daniel P . Smith" <dpsmith@xxxxxxxxxxxxxxxxxxxx>, Stewart Hildebrand <Stewart.Hildebrand@xxxxxxx>, Jiqian Chen <Jiqian.Chen@xxxxxxx>, Huang Rui <ray.huang@xxxxxxx>
  • Delivery-date: Tue, 03 Sep 2024 07:05:01 +0000
  • List-id: Xen developer discussion <xen-devel.lists.xenproject.org>

When a device has been reset on dom0 side, the Xen hypervisor
doesn't get notification, so the cached state in vpci is all
out of date compare with the real device state.

To solve that problem, add a new hypercall to support the reset
of pcidev and clear the vpci state of device. So that once the
state of device is reset on dom0 side, dom0 can call this
hypercall to notify hypervisor.

The behavior of different reset types may be different in the
future, so divide them now so that they can be easily modified
in the future without affecting the hypercall interface.

Signed-off-by: Jiqian Chen <Jiqian.Chen@xxxxxxx>
Signed-off-by: Huang Rui <ray.huang@xxxxxxx>
Signed-off-by: Jiqian Chen <Jiqian.Chen@xxxxxxx>
---
v13->v14 changes:
Removed the check ( !is_pci_passthrough_enabled() ).
Added if ( dev_reset.flags & ~PCI_DEVICE_RESET_MASK ) to check if the other 
bits are zero.

v12->v13 changes:
Deleted all "state" words in new code, because it is not necessary.
Deleted unnecessary parameter reset_type of function vpci_reset_device, and 
changed this function to inline function
Added description to commit message to indicate that the classification of 
reset types is for possible different behaviors in the future
Renamed reset_type of struct pci_device_reset to flags, and modified the value 
of macro definition of reset, let them occupy two lowest bits.
Change the function vpci_reset_device to an inline function and delete the 
ASSERT(rw_is_write_locked(&pdev->domain->pci_lock)); because this call exists 
in subsequent functions and it accesses domain and pci_lock, which will affect 
the compilation process.

v11->v12 changes:
Change the title of this patch(Add hypercall to support reset of pcidev).
Remove unnecessary notes, erroneous stamps, and #define.

v10->v11 changes:
Move the curly braces of "case PHYSDEVOP_pci_device_state_reset" to the next 
line.
Delete unnecessary local variables "struct physdev_pci_device *dev".
Downgrade printk to dprintk.
Moved struct pci_device_state_reset to the public header file.
Delete enum pci_device_state_reset_type, and use macro definitions to represent 
different reset types.
Delete pci_device_state_reset_method, and add switch cases in 
PHYSDEVOP_pci_device_state_reset to handle different reset functions.
Add reset type as a function parameter for vpci_reset_device_state for possible 
future use.

v9->v10 changes:
Nothing.

v8->v9 changes:
Move pcidevs_unlock below write_lock, and remove "ASSERT(pcidevs_locked());" 
from vpci_reset_device_state;
Add pci_device_state_reset_type to distinguish the reset types.

v7->v8 changes:
Nothing.

v6->v7 changes:
Nothing.

v5->v6 changes:
Rebase code and change old function vpci_remove_device, vpci_add_handlers to 
vpci_deassign_device, vpci_assign_device.

v4->v5 changes:
Add pci_lock wrap function vpci_reset_device_state.

v3->v4 changes:
Change the comment of PHYSDEVOP_pci_device_state_reset;
Move printings behind pcidevs_unlock.

v2->v3 changes:
Move the content out of pci_reset_device_state and delete 
pci_reset_device_state;
Add xsm_resource_setup_pci check for PHYSDEVOP_pci_device_state_reset;
Add description for PHYSDEVOP_pci_device_state_reset;

for patch 1
---
 xen/arch/x86/hvm/hypercall.c |  1 +
 xen/drivers/pci/physdev.c    | 52 ++++++++++++++++++++++++++++++++++++
 xen/include/public/physdev.h | 17 ++++++++++++
 xen/include/xen/vpci.h       |  6 +++++
 4 files changed, 76 insertions(+)

diff --git a/xen/arch/x86/hvm/hypercall.c b/xen/arch/x86/hvm/hypercall.c
index 44342e7e7fc3..f023f7879e24 100644
--- a/xen/arch/x86/hvm/hypercall.c
+++ b/xen/arch/x86/hvm/hypercall.c
@@ -84,6 +84,7 @@ long hvm_physdev_op(int cmd, XEN_GUEST_HANDLE_PARAM(void) arg)
     case PHYSDEVOP_pci_mmcfg_reserved:
     case PHYSDEVOP_pci_device_add:
     case PHYSDEVOP_pci_device_remove:
+    case PHYSDEVOP_pci_device_reset:
     case PHYSDEVOP_dbgp_op:
         if ( !is_hardware_domain(currd) )
             return -ENOSYS;
diff --git a/xen/drivers/pci/physdev.c b/xen/drivers/pci/physdev.c
index 42db3e6d133c..0161a85e1e9c 100644
--- a/xen/drivers/pci/physdev.c
+++ b/xen/drivers/pci/physdev.c
@@ -2,6 +2,7 @@
 #include <xen/guest_access.h>
 #include <xen/hypercall.h>
 #include <xen/init.h>
+#include <xen/vpci.h>
 
 #ifndef COMPAT
 typedef long ret_t;
@@ -67,6 +68,57 @@ ret_t pci_physdev_op(int cmd, XEN_GUEST_HANDLE_PARAM(void) 
arg)
         break;
     }
 
+    case PHYSDEVOP_pci_device_reset:
+    {
+        struct pci_device_reset dev_reset;
+        struct pci_dev *pdev;
+        pci_sbdf_t sbdf;
+
+        ret = -EFAULT;
+        if ( copy_from_guest(&dev_reset, arg, 1) != 0 )
+            break;
+
+        ret = -EINVAL;
+        if ( dev_reset.flags & ~PCI_DEVICE_RESET_MASK )
+            break;
+
+        sbdf = PCI_SBDF(dev_reset.dev.seg,
+                        dev_reset.dev.bus,
+                        dev_reset.dev.devfn);
+
+        ret = xsm_resource_setup_pci(XSM_PRIV, sbdf.sbdf);
+        if ( ret )
+            break;
+
+        pcidevs_lock();
+        pdev = pci_get_pdev(NULL, sbdf);
+        if ( !pdev )
+        {
+            pcidevs_unlock();
+            ret = -ENODEV;
+            break;
+        }
+
+        write_lock(&pdev->domain->pci_lock);
+        pcidevs_unlock();
+        switch ( dev_reset.flags & PCI_DEVICE_RESET_MASK )
+        {
+        case PCI_DEVICE_RESET_COLD:
+        case PCI_DEVICE_RESET_WARM:
+        case PCI_DEVICE_RESET_HOT:
+        case PCI_DEVICE_RESET_FLR:
+            ret = vpci_reset_device(pdev);
+            break;
+
+        default:
+            ret = -EINVAL;
+            break;
+        }
+        write_unlock(&pdev->domain->pci_lock);
+
+        break;
+    }
+
     default:
         ret = -ENOSYS;
         break;
diff --git a/xen/include/public/physdev.h b/xen/include/public/physdev.h
index f0c0d4727c0b..45e1c18541c8 100644
--- a/xen/include/public/physdev.h
+++ b/xen/include/public/physdev.h
@@ -296,6 +296,13 @@ DEFINE_XEN_GUEST_HANDLE(physdev_pci_device_add_t);
  */
 #define PHYSDEVOP_prepare_msix          30
 #define PHYSDEVOP_release_msix          31
+/*
+ * Notify the hypervisor that a PCI device has been reset, so that any
+ * internally cached state is regenerated.  Should be called after any
+ * device reset performed by the hardware domain.
+ */
+#define PHYSDEVOP_pci_device_reset      32
+
 struct physdev_pci_device {
     /* IN */
     uint16_t seg;
@@ -305,6 +312,16 @@ struct physdev_pci_device {
 typedef struct physdev_pci_device physdev_pci_device_t;
 DEFINE_XEN_GUEST_HANDLE(physdev_pci_device_t);
 
+struct pci_device_reset {
+    physdev_pci_device_t dev;
+#define PCI_DEVICE_RESET_COLD 0x0
+#define PCI_DEVICE_RESET_WARM 0x1
+#define PCI_DEVICE_RESET_HOT  0x2
+#define PCI_DEVICE_RESET_FLR  0x3
+#define PCI_DEVICE_RESET_MASK 0x3
+    uint32_t flags;
+};
+
 #define PHYSDEVOP_DBGP_RESET_PREPARE    1
 #define PHYSDEVOP_DBGP_RESET_DONE       2
 
diff --git a/xen/include/xen/vpci.h b/xen/include/xen/vpci.h
index da8d0f41e6f4..41e7c3bc2791 100644
--- a/xen/include/xen/vpci.h
+++ b/xen/include/xen/vpci.h
@@ -304,6 +304,12 @@ static inline bool __must_check 
vpci_process_pending(struct vcpu *v)
 }
 #endif
 
+static inline int __must_check vpci_reset_device(struct pci_dev *pdev)
+{
+    vpci_deassign_device(pdev);
+    return vpci_assign_device(pdev);
+}
+
 #endif
 
 /*
-- 
2.34.1




 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.