[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [PATCH v7 08/11] Arm32: use new-style entry annotations for MMU code
On 01.10.2024 17:16, Jan Beulich wrote: > Locally override SYM_PUSH_SECTION() to retain the intended section > association. > > Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> > --- > v7: New. I'm sorry, I failed to Cc maintainers here. Jan > --- a/xen/arch/arm/arm32/mmu/head.S > +++ b/xen/arch/arm/arm32/mmu/head.S > @@ -160,6 +160,13 @@ > .endm > > .section .text.idmap, "ax", %progbits > +/* > + * Code below wants to all live in the section established above. > Annotations > + * from xen/linkage.h therefore may not switch sections (honoring > + * CONFIG_CC_SPLIT_SECTIONS). Override the respective macro. > + */ > +#undef SYM_PUSH_SECTION > +#define SYM_PUSH_SECTION(name, attr) > > /* > * Rebuild the boot pagetable's first-level entries. The structure > @@ -174,7 +181,7 @@ > * > * Clobbers r0 - r5 > */ > -create_page_tables: > +FUNC_LOCAL(create_page_tables) > /* Prepare the page-tables for mapping Xen */ > mov_w r0, XEN_VIRT_START > > @@ -263,7 +270,7 @@ use_temporary_mapping: > > mov r12, #1 /* r12 := temporary mapping created */ > mov pc, lr > -ENDPROC(create_page_tables) > +END(create_page_tables) > > /* > * Turn on the Data Cache and the MMU. The function will return > @@ -276,7 +283,7 @@ ENDPROC(create_page_tables) > * > * Clobbers r0 - r5 > */ > -enable_mmu: > +FUNC_LOCAL(enable_mmu) > PRINT("- Turning on paging -\r\n") > > /* > @@ -346,7 +353,7 @@ enable_mmu: > teq r12, #0 > beq remove_identity_mapping > b remove_temporary_mapping > -ENDPROC(enable_mmu) > +END(enable_mmu) > > /* > * Switch to the runtime mapping. The logic depends on whether the > @@ -366,7 +373,7 @@ ENDPROC(enable_mmu) > * > * Clobbers r0 - r4 > */ > -switch_to_runtime_mapping: > +FUNC_LOCAL(switch_to_runtime_mapping) > /* > * Jump to the runtime mapping if the virt and phys are not > * clashing > @@ -411,7 +418,7 @@ ready_to_switch: > PRINT_ID("- Jumping to runtime address -\r\n") > > mov pc, lr > -ENDPROC(switch_to_runtime_mapping) > +END(switch_to_runtime_mapping) > > /* > * Enable mm (turn on the data cache and the MMU) for secondary CPUs. > @@ -428,7 +435,7 @@ ENDPROC(switch_to_runtime_mapping) > * > * Clobbers r0 - r6 > */ > -ENTRY(enable_secondary_cpu_mm) > +FUNC(enable_secondary_cpu_mm) > mov r6, lr > > bl create_page_tables > @@ -456,7 +463,7 @@ ENTRY(enable_secondary_cpu_mm) > > /* Return to the virtual address requested by the caller. */ > mov pc, r6 > -ENDPROC(enable_secondary_cpu_mm) > +END(enable_secondary_cpu_mm) > > /* > * Enable mm (turn on the data cache and the MMU) for the boot CPU. > @@ -474,7 +481,7 @@ ENDPROC(enable_secondary_cpu_mm) > * > * Clobbers r0 - r6 > */ > -ENTRY(enable_boot_cpu_mm) > +FUNC(enable_boot_cpu_mm) > mov r6, lr > > #ifdef CONFIG_EARLY_PRINTK > @@ -491,7 +498,7 @@ ENTRY(enable_boot_cpu_mm) > /* Address in the runtime mapping to jump to after the MMU is > enabled */ > mov lr, r6 > b enable_mmu > -ENDPROC(enable_boot_cpu_mm) > +END(enable_boot_cpu_mm) > > /* > * Remove the 1:1 map from the page-tables. It is not easy to keep track > @@ -503,7 +510,7 @@ ENDPROC(enable_boot_cpu_mm) > * > * Clobbers r0 - r3 > */ > -remove_identity_mapping: > +FUNC_LOCAL(remove_identity_mapping) > PRINT("- Removing the identity mapping -\r\n") > > /* r2:r3 := invalid page-table entry */ > @@ -518,14 +525,14 @@ remove_identity_mapping: > > flush_xen_tlb_local r0 > mov pc, lr > -ENDPROC(remove_identity_mapping) > +END(remove_identity_mapping) > > /* > * Remove the temporary mapping of Xen starting at TEMPORARY_XEN_VIRT_START. > * > * Clobbers r0 - r3 > */ > -remove_temporary_mapping: > +FUNC_LOCAL(remove_temporary_mapping) > PRINT("- Removing the temporary mapping -\r\n") > > /* r2:r3 := invalid page-table entry */ > @@ -541,13 +548,14 @@ remove_temporary_mapping: > flush_xen_tlb_local r0 > > mov pc, lr > -ENDPROC(remove_temporary_mapping) > +END(remove_temporary_mapping) > > /* Fail-stop */ > -fail: PRINT("- Boot failed -\r\n") > +FUNC_LOCAL(fail) > + PRINT("- Boot failed -\r\n") > 1: wfe > b 1b > -ENDPROC(fail) > +END(fail) > > /* > * Switch TTBR > @@ -555,7 +563,7 @@ ENDPROC(fail) > * > * TODO: This code does not comply with break-before-make. > */ > -ENTRY(switch_ttbr) > +FUNC(switch_ttbr) > dsb /* Ensure the flushes happen before > * continuing */ > isb /* Ensure synchronization with > previous > @@ -579,4 +587,4 @@ ENTRY(switch_ttbr) > isb > > mov pc, lr > -ENDPROC(switch_ttbr) > +END(switch_ttbr) >
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |