|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [PATCH v5 2/5] x86/boot: Reuse code to relocate trampoline
Move code from efi-boot.h to a separate, new, reloc-trampoline.c file.
Reuse this new code, compiling it for 32bit as well, to replace assembly
code in head.S doing the same thing.
Signed-off-by: Frediano Ziglio <frediano.ziglio@xxxxxxxxx>
Reviewed-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
---
Changes since v3:
- fixed a typo in comment;
- added Reviewed-by.
---
xen/arch/x86/boot/Makefile | 12 ++++++----
xen/arch/x86/boot/build32.lds.S | 5 ++++
xen/arch/x86/boot/head.S | 23 +-----------------
xen/arch/x86/boot/reloc-trampoline.c | 36 ++++++++++++++++++++++++++++
xen/arch/x86/efi/efi-boot.h | 15 ++----------
5 files changed, 52 insertions(+), 39 deletions(-)
create mode 100644 xen/arch/x86/boot/reloc-trampoline.c
diff --git a/xen/arch/x86/boot/Makefile b/xen/arch/x86/boot/Makefile
index c665a9b420..c57c9f83d3 100644
--- a/xen/arch/x86/boot/Makefile
+++ b/xen/arch/x86/boot/Makefile
@@ -1,12 +1,16 @@
obj-bin-y += head.o
obj-bin-y += built-in-32.o
+obj-bin-y += $(obj64)
obj32 := cmdline.32.o
obj32 += reloc.32.o
+obj32 += reloc-trampoline.32.o
-nocov-y += $(obj32)
-noubsan-y += $(obj32)
-targets += $(obj32)
+obj64 := reloc-trampoline.o
+
+nocov-y += $(obj32) $(obj64)
+noubsan-y += $(obj32) $(obj64)
+targets += $(obj32) $(obj64)
obj32 := $(addprefix $(obj)/,$(obj32))
@@ -57,7 +61,7 @@ $(obj)/built-in-32.S: $(obj)/built-in-32.other.bin
$(obj)/built-in-32.final.bin
--bin1 $(obj)/built-in-32.other.bin \
--bin2 $(obj)/built-in-32.final.bin \
--map $(obj)/built-in-32.final.map \
- --exports cmdline_parse_early,reloc \
+ --exports cmdline_parse_early,reloc,reloc_trampoline32 \
--output $@
clean-files := built-in-32.*.bin built-in-32.*.map build32.*.lds
diff --git a/xen/arch/x86/boot/build32.lds.S b/xen/arch/x86/boot/build32.lds.S
index e3f5e55261..fa282370f4 100644
--- a/xen/arch/x86/boot/build32.lds.S
+++ b/xen/arch/x86/boot/build32.lds.S
@@ -41,6 +41,11 @@ SECTIONS
* Potentially they should be all variables. */
DECLARE_IMPORT(__base_relocs_start);
DECLARE_IMPORT(__base_relocs_end);
+ DECLARE_IMPORT(__trampoline_rel_start);
+ DECLARE_IMPORT(__trampoline_rel_stop);
+ DECLARE_IMPORT(__trampoline_seg_start);
+ DECLARE_IMPORT(__trampoline_seg_stop);
+ DECLARE_IMPORT(trampoline_phys);
. = . + GAP;
*(.text)
*(.text.*)
diff --git a/xen/arch/x86/boot/head.S b/xen/arch/x86/boot/head.S
index e0776e3896..ade2c5c43d 100644
--- a/xen/arch/x86/boot/head.S
+++ b/xen/arch/x86/boot/head.S
@@ -706,28 +706,7 @@ trampoline_setup:
mov %edx, sym_offs(l1_bootmap)(%esi, %ecx, 8)
/* Apply relocations to bootstrap trampoline. */
- mov sym_esi(trampoline_phys), %edx
- lea sym_esi(__trampoline_rel_start), %edi
- lea sym_esi(__trampoline_rel_stop), %ecx
-1:
- mov (%edi), %eax
- add %edx, (%edi, %eax)
- add $4,%edi
-
- cmp %ecx, %edi
- jb 1b
-
- /* Patch in the trampoline segment. */
- shr $4,%edx
- lea sym_esi(__trampoline_seg_start), %edi
- lea sym_esi(__trampoline_seg_stop), %ecx
-1:
- mov (%edi), %eax
- mov %dx, (%edi, %eax)
- add $4,%edi
-
- cmp %ecx, %edi
- jb 1b
+ call reloc_trampoline32
/* Do not parse command line on EFI platform here. */
cmpb $0, sym_esi(efi_platform)
diff --git a/xen/arch/x86/boot/reloc-trampoline.c
b/xen/arch/x86/boot/reloc-trampoline.c
new file mode 100644
index 0000000000..0a74c1e75a
--- /dev/null
+++ b/xen/arch/x86/boot/reloc-trampoline.c
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <xen/compiler.h>
+#include <xen/stdint.h>
+#include <asm/trampoline.h>
+
+extern const int32_t __trampoline_rel_start[], __trampoline_rel_stop[];
+extern const int32_t __trampoline_seg_start[], __trampoline_seg_stop[];
+
+#if defined(__i386__)
+void reloc_trampoline32(void)
+#elif defined (__x86_64__)
+void reloc_trampoline64(void)
+#else
+#error Unknown architecture
+#endif
+{
+ unsigned long phys = trampoline_phys;
+ const int32_t *trampoline_ptr;
+
+ /*
+ * Apply relocations to trampoline.
+ *
+ * This modifies the trampoline in place within Xen, so that it will
+ * operate correctly when copied into place.
+ */
+ for ( trampoline_ptr = __trampoline_rel_start;
+ trampoline_ptr < __trampoline_rel_stop;
+ ++trampoline_ptr )
+ *(uint32_t *)(*trampoline_ptr + (long)trampoline_ptr) += phys;
+
+ for ( trampoline_ptr = __trampoline_seg_start;
+ trampoline_ptr < __trampoline_seg_stop;
+ ++trampoline_ptr )
+ *(uint16_t *)(*trampoline_ptr + (long)trampoline_ptr) = phys >> 4;
+}
diff --git a/xen/arch/x86/efi/efi-boot.h b/xen/arch/x86/efi/efi-boot.h
index 94f3443364..1acceec471 100644
--- a/xen/arch/x86/efi/efi-boot.h
+++ b/xen/arch/x86/efi/efi-boot.h
@@ -103,27 +103,16 @@ static void __init efi_arch_relocate_image(unsigned long
delta)
}
}
-extern const int32_t __trampoline_rel_start[], __trampoline_rel_stop[];
-extern const int32_t __trampoline_seg_start[], __trampoline_seg_stop[];
+void reloc_trampoline64(void);
static void __init relocate_trampoline(unsigned long phys)
{
- const int32_t *trampoline_ptr;
-
trampoline_phys = phys;
if ( !efi_enabled(EFI_LOADER) )
return;
- /* Apply relocations to trampoline. */
- for ( trampoline_ptr = __trampoline_rel_start;
- trampoline_ptr < __trampoline_rel_stop;
- ++trampoline_ptr )
- *(u32 *)(*trampoline_ptr + (long)trampoline_ptr) += phys;
- for ( trampoline_ptr = __trampoline_seg_start;
- trampoline_ptr < __trampoline_seg_stop;
- ++trampoline_ptr )
- *(u16 *)(*trampoline_ptr + (long)trampoline_ptr) = phys >> 4;
+ reloc_trampoline64();
}
static void __init place_string(u32 *addr, const char *s)
--
2.34.1
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |