[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [RFC TEST_ARTIFACTS PATCH 1/2] artifacts: Initial commit
On Tue, 22 Oct 2024, victorm.lira@xxxxxxx wrote: > From: Stefano Stabellini <sstabellini@xxxxxxxxxx> Hi Victor, I think this was a mistake, maybe due to the fact that I created the repository for you. The From field represent the vauthor and in this case it should be you. > Create new repository to produce common artifacts for Xen tests > > Requested-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> > Signed-off-by: Victor Lira <victorm.lira@xxxxxxx> > --- > Cc: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> > Cc: Marek Marczykowski-Górecki <marmarek@xxxxxxxxxxxxxxxxxxxxxx> > Cc: Doug Goldstein <cardoe@xxxxxxxxxx> > Cc: Stefano Stabellini <sstabellini@xxxxxxxxxx> > Cc: xen-devel@xxxxxxxxxxxxxxxxxxxx > --- > .gitlab-ci.yml | 48 ++++++++++++++++++++ > README.md | 10 ++++ > binaries/.gitignore | 3 ++ > images/Makefile | 20 ++++++++ > images/alpine/x86_64-build.dockerfile | 25 ++++++++++ > images/alpine/x86_64-rootfs.dockerfile | 4 ++ > scripts/x86_64-argo-linux.sh | 63 ++++++++++++++++++++++++++ > scripts/x86_64-kernel-linux.sh | 31 +++++++++++++ > scripts/x86_64-rootfs-alpine.sh | 58 ++++++++++++++++++++++++ > 9 files changed, 262 insertions(+) > create mode 100644 .gitlab-ci.yml > create mode 100644 README.md > create mode 100644 binaries/.gitignore > create mode 100644 images/Makefile > create mode 100644 images/alpine/x86_64-build.dockerfile > create mode 100644 images/alpine/x86_64-rootfs.dockerfile > create mode 100755 scripts/x86_64-argo-linux.sh > create mode 100755 scripts/x86_64-kernel-linux.sh > create mode 100755 scripts/x86_64-rootfs-alpine.sh > > diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml > new file mode 100644 > index 0000000..f2f7738 > --- /dev/null > +++ b/.gitlab-ci.yml > @@ -0,0 +1,48 @@ > +workflow: > + name: "xen test artifacts" > + > +.artifacts: > + stage: build > + image: > + name: > registry.gitlab.com/xen-project/people/victormlira/test-artifacts/${CONTAINER} This of course needs to be changed before the series is committed > + artifacts: > + name: "${CI_JOB_NAME_SLUG}" > + paths: > + - binaries/ > + > +.x86_64-artifacts: > + extends: .artifacts > + image: > + docker: > + platform: linux/amd64 > + user: xenproject > + variables: > + CONTAINER: alpine:x86_64-build > + tags: > + - x86_64 > + > +x86_64-kernel-linux-6.6.56: > + extends: .x86_64-artifacts > + script: > + - . scripts/x86_64-kernel-linux.sh > + variables: > + LINUX_VERSION: 6.6.56 > + > +x86_64-rootfs-alpine-3.18: > + extends: .x86_64-artifacts > + variables: > + CONTAINER: alpine:x86_64-rootfs > + image: > + docker: > + user: root > + script: > + - . scripts/x86_64-rootfs-alpine.sh > + > +x86_64-argo-linux-6.6.56: > + extends: .x86_64-artifacts > + script: > + - . scripts/x86_64-argo-linux.sh > + variables: > + LINUX_VERSION: 6.6.56 > + ARGO_SHA: "705a7a8a624b42e13e655d3042059b8a85cdf6a3" > + ARGOEXEC_SHA: "d900429f6640acc6f68a3d3a4c945d7da60625d8" > diff --git a/README.md b/README.md > new file mode 100644 > index 0000000..0d72519 > --- /dev/null > +++ b/README.md > @@ -0,0 +1,10 @@ > +# Xen Project Test Artifacts > + > +## Overview > + > +This repository is used to produce common artifacts for Xen tests. > + > +## > + > + > +## > diff --git a/binaries/.gitignore b/binaries/.gitignore > new file mode 100644 > index 0000000..95e2a2e > --- /dev/null > +++ b/binaries/.gitignore > @@ -0,0 +1,3 @@ > +# Keep this directory around to be available in CI/CD jobs. > +* > +!.gitignore > diff --git a/images/Makefile b/images/Makefile > new file mode 100644 > index 0000000..41638d7 > --- /dev/null > +++ b/images/Makefile > @@ -0,0 +1,20 @@ > + > +# The base of where these containers will appear > +REGISTRY := registry.gitlab.com/xen-project/people/victormlira/test-artifacts also this > +CONTAINERS = $(subst .dockerfile,,$(wildcard */*.dockerfile)) > + > +help: > + @echo "Containers to build test artifacts." > + @echo "To build one run 'make DISTRO/TAG'." > + @echo "Available containers:" > + @$(foreach file,$(sort $(CONTAINERS)),echo ${file};) > + @echo "To push container builds, set the environment variable PUSH" > + > +%: %.dockerfile ## Builds containers > + docker build --pull -t $(REGISTRY)/$(@D):$(@F) -f $< $(<D) > + @if [ ! -z $${PUSH+x} ]; then \ > + docker push $(REGISTRY)/$(@D):$(@F); \ > + fi > + > +.PHONY: all > +all: $(CONTAINERS) > diff --git a/images/alpine/x86_64-build.dockerfile > b/images/alpine/x86_64-build.dockerfile > new file mode 100644 > index 0000000..374952f > --- /dev/null > +++ b/images/alpine/x86_64-build.dockerfile > @@ -0,0 +1,25 @@ > +# syntax=docker/dockerfile:1 > +FROM --platform=linux/amd64 alpine:3.18 > +LABEL maintainer.name="The Xen Project" \ > + maintainer.email="xen-devel@xxxxxxxxxxxxxxxxxxxx" > + > +WORKDIR /build/ > + > +RUN <<EOF > +adduser -D xenproject > +apk --no-cache add \ > + musl-dev \ > + build-base \ > + libc6-compat \ > + linux-headers \ > + bash \ > + git \ > + curl \ > + flex \ > + bison \ > + elfutils-dev \ > + autoconf \ > + automake \ > + libtool \ > + openssl-dev Use the DEPS variable like here to make it a bit more readable: automation/build/fedora/40-x86_64.dockerfile > +EOF > diff --git a/images/alpine/x86_64-rootfs.dockerfile > b/images/alpine/x86_64-rootfs.dockerfile > new file mode 100644 > index 0000000..b912e9c > --- /dev/null > +++ b/images/alpine/x86_64-rootfs.dockerfile > @@ -0,0 +1,4 @@ > +# syntax=docker/dockerfile:1 > +FROM --platform=linux/amd64 alpine:3.18 > +LABEL maintainer.name="The Xen Project" \ > + maintainer.email="xen-devel@xxxxxxxxxxxxxxxxxxxx" > diff --git a/scripts/x86_64-argo-linux.sh b/scripts/x86_64-argo-linux.sh > new file mode 100755 > index 0000000..a110a33 > --- /dev/null > +++ b/scripts/x86_64-argo-linux.sh > @@ -0,0 +1,63 @@ > +#!/usr/bin/env bash > + > +if test -z "${LINUX_VERSION}" > +then > + >&2 echo "LINUX_VERSION must be set"; exit 1 > +fi > + > +set -ex -o pipefail > + > +BUILDDIR="${PWD}" > +COPYDIR="${BUILDDIR}/binaries/" > + > +# Prepare Linux sources > +curl -fsSLO \ > + > https://cdn.kernel.org/pub/linux/kernel/v6.x/linux-"${LINUX_VERSION}".tar.xz > +tar xJf linux-"${LINUX_VERSION}".tar.xz > +cd linux-"${LINUX_VERSION}" > +make ARCH=x86 defconfig > +make ARCH=x86 xen.config > +./scripts/config --enable BRIDGE > +./scripts/config --enable IGC > +./scripts/config --enable TUN > +cp .config .config.orig > +cat .config.orig \ > + | grep 'XEN' \ > + | grep '=m' \ > + | sed 's/=m/=y/g' \ > + >> .config > +make ARCH=x86 olddefconfig > +make ARCH=x86 modules_prepare > + > +# Build Linux kernel module for Xen Argo > +cd "${BUILDDIR}" > +git clone \ > + --depth=1 --branch=master \ > + https://github.com/OpenXT/linux-xen-argo.git > +git -C "${BUILDDIR}/linux-xen-argo" switch --detach "${ARGO_SHA}" > +make -C "linux-${LINUX_VERSION}" M="${BUILDDIR}/linux-xen-argo/argo-linux" \ > + CFLAGS_MODULE="-Wno-error" KBUILD_MODPOST_WARN=1 > +cp "linux-xen-argo/argo-linux/xen-argo.ko" "${COPYDIR}/xen-argo.ko" > + > +# Build Linux libargo shared library, applying fixes to build in Alpine Linux > +cd "${BUILDDIR}/linux-xen-argo/libargo" > +sed -i "s|AM_INIT_AUTOMAKE|AC_CONFIG_AUX_DIR(.)\nAM_INIT_AUTOMAKE|" > configure.ac > +sed -i "s/__SOCKADDR_COMMON (sxenargo_)/sa_family_t sxenargo_family/" > src/libargo.h > +sed -i "s/__SOCKADDR_COMMON_SIZE/(sizeof (unsigned short int))/" > src/libargo.h > +autoreconf --install > +./configure --prefix="${COPYDIR}" CPPFLAGS="-I${PWD}/../argo-linux/include" > +make > +make install > + > +# Build Linux user program, modifying for xilinx argo test > +cd "${BUILDDIR}" > +wget "https://raw.githubusercontent.com/OpenXT/xenclient-oe/${ARGOEXEC_SHA}/\ > +recipes-openxt/argo-exec/argo-exec/argo-exec.c" > +sed -i "s|#include <xen/xen.h>||" argo-exec.c > +sed -i "s|ret = shuffle(s, fds\[0\], fds\[1\]);|ret = shuffle(s, 0, 1);|" \ > + argo-exec.c > +gcc -I"${BUILDDIR}/linux-xen-argo/libargo/src" \ > + -I"${BUILDDIR}/linux-xen-argo/argo-linux/include" \ > + -L"${COPYDIR}/lib/" \ > + -o argo-exec argo-exec.c -largo > +cp argo-exec "${COPYDIR}" > diff --git a/scripts/x86_64-kernel-linux.sh b/scripts/x86_64-kernel-linux.sh > new file mode 100755 > index 0000000..17be36b > --- /dev/null > +++ b/scripts/x86_64-kernel-linux.sh > @@ -0,0 +1,31 @@ > +#!/usr/bin/env bash > + > +if test -z "${LINUX_VERSION}" > +then > + >&2 echo "LINUX_VERSION must be set"; exit 1 > +fi > + > +set -ex -o pipefail > + > +WORKDIR="${PWD}" > +COPYDIR="${WORKDIR}/binaries/" > + > +# Build Linux > +curl -fsSLO \ > + > https://cdn.kernel.org/pub/linux/kernel/v6.x/linux-"${LINUX_VERSION}".tar.xz > +tar xJf linux-"${LINUX_VERSION}".tar.xz > +cd linux-"${LINUX_VERSION}" > +make ARCH=x86 defconfig > +make ARCH=x86 xen.config > +./scripts/config --enable BRIDGE > +./scripts/config --enable IGC > +./scripts/config --enable TUN > +cp .config .config.orig > +cat .config.orig \ > + | grep 'XEN' \ > + | grep '=m' \ > + | sed 's/=m/=y/g' \ > + >> .config > +make ARCH=x86 olddefconfig > +make ARCH=x86 "-j$(nproc)" --quiet > +cp arch/x86/boot/bzImage "${COPYDIR}" > diff --git a/scripts/x86_64-rootfs-alpine.sh b/scripts/x86_64-rootfs-alpine.sh > new file mode 100755 > index 0000000..28d8e30 > --- /dev/null > +++ b/scripts/x86_64-rootfs-alpine.sh > @@ -0,0 +1,58 @@ > +WORKDIR="${PWD}" > + > +apk update > + > +# xen runtime deps > +apk add musl > +apk add libgcc > +apk add openrc > +apk add busybox > +apk add sudo > +apk add dbus > +apk add bash > +apk add python3 > +apk add zlib > +apk add ncurses > +apk add yajl > +apk add libaio > +apk add xz > +apk add util-linux > +apk add argp-standalone > +apk add libfdt > +apk add glib > +apk add pixman > +apk add curl > +apk add udev > +apk add pciutils > +apk add libelf > + > +# Xen > +cd / > +# Minimal ramdisk environment in case of cpio output > +rc-update add udev > +rc-update add udev-trigger > +rc-update add udev-settle > +rc-update add loopback sysinit > +rc-update add bootmisc boot > +rc-update add devfs sysinit > +rc-update add dmesg sysinit > +rc-update add hostname boot > +rc-update add hwclock boot > +rc-update add hwdrivers sysinit > +rc-update add modules boot > +rc-update add killprocs shutdown > +rc-update add mount-ro shutdown > +rc-update add savecache shutdown > +rc-update add local default > +cp -a /sbin/init /init > +echo "ttyS0" >> /etc/securetty > +echo "hvc0" >> /etc/securetty > +echo "ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100" >> /etc/inittab > +echo "hvc0::respawn:/sbin/getty -L hvc0 115200 vt100" >> /etc/inittab > +echo > /etc/modules > +passwd -d "root" root > + > +# Create rootfs > +cd / > +tar cvzf "${WORKDIR}/binaries/initrd.tar.gz" \ > + bin dev etc home init lib mnt opt root sbin usr var > -- > 2.25.1 >
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |