[PATCH v7 11/16] emul/ns16x50: implement FCR register (write-only)

[dmukhin@xxxxxxx]

From: Denis Mukhin <dmukhin@xxxxxxxx> 

Add emulation logic for FCR register.

Note, that does not hook FIFO interrupt moderation to the FIFO management
code for simplicity.

Signed-off-by: Denis Mukhin <dmukhin@xxxxxxxx>
---
Changes since v6:
- dropped UART_IIR_THR handling from UART_FCR_CLTX case
---
 xen/common/emul/vuart/ns16x50.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/xen/common/emul/vuart/ns16x50.c b/xen/common/emul/vuart/ns16x50.c
index 137ce08f4e1d..a92df6923aa5 100644
--- a/xen/common/emul/vuart/ns16x50.c
+++ b/xen/common/emul/vuart/ns16x50.c
@@ -374,6 +374,33 @@ static int ns16x50_io_write8(
             regs[UART_IER] = val & UART_IER_MASK;
             break;
 
+        case UART_FCR: /* WO */
+            if ( val & UART_FCR_RSRVD0 )
+                ns16x50_warn(vdev, "FCR: attempt to set reserved bit: %x\n",
+                             UART_FCR_RSRVD0);
+
+            if ( val & UART_FCR_RSRVD1 )
+                ns16x50_warn(vdev, "FCR: attempt to set reserved bit: %x\n",
+                             UART_FCR_RSRVD1);
+
+            if ( val & UART_FCR_CLRX )
+            {
+                ns16x50_fifo_rx_reset(vdev);
+                regs[UART_LSR] &= ~UART_LSR_DR;
+            }
+
+            if ( val & UART_FCR_CLTX )
+                ns16x50_fifo_tx_reset(vdev);
+
+            if ( val & UART_FCR_ENABLE )
+                val &= UART_FCR_ENABLE | UART_FCR_DMA | UART_FCR_TRG_MASK;
+            else
+                val = 0;
+
+            regs[UART_FCR] = val;
+
+            break;
+
         case UART_LCR:
             regs[UART_LCR] = val;
             break;
-- 
2.51.0