Re: [PATCH v1 03/17] xen/riscv: add missing APLIC register offsets, masks to asm/aplic.h

[Jan Beulich <jbeulich@xxxxxxxx>]

On 29.07.2026 17:26, Oleksii Kurochko wrote:
> 
> 
> On 7/28/26 2:02 PM, Jan Beulich wrote:
>> On 20.07.2026 18:02, Oleksii Kurochko wrote:
>>> @@ -25,6 +27,7 @@
>>>   #define APLIC_DOMAINCFG_DM      BIT(2, U)
>>>   #define APLIC_DOMAINCFG_BE      BIT(0, U)
>>>   
>>> +/* sourcecfg register fields */
>>>   #define APLIC_SOURCECFG_SM_INACTIVE     0x0
>>>   #define APLIC_SOURCECFG_SM_DETACH       0x1
>>>   #define APLIC_SOURCECFG_SM_EDGE_RISE    0x4
>>> @@ -32,7 +35,39 @@
>>>   #define APLIC_SOURCECFG_SM_LEVEL_HIGH   0x6
>>>   #define APLIC_SOURCECFG_SM_LEVEL_LOW    0x7
>>>   
>>> +/* target register fields */
>>>   #define APLIC_TARGET_HART_IDX_SHIFT 18
>>> +#define APLIC_TARGET_EIID_MASK      0x7ff
>>
>> So why would these live here, far ahead of ...
>>
>>> +#define APLIC_DOMAINCFG         0x0000
>>> +#define APLIC_SOURCECFG_BASE    0x0004
>>> +#define APLIC_SOURCECFG_LAST    0x0ffc
>>> +
>>> +#define APLIC_SMSICFGADDR       0x1bc8
>>> +#define APLIC_SMSICFGADDRH      0x1bcc
>>> +
>>> +#define APLIC_SETIP_BASE        0x1c00
>>> +#define APLIC_SETIP_LAST        0x1c7c
>>> +#define APLIC_SETIPNUM          0x1cdc
>>> +
>>> +#define APLIC_CLRIP_BASE        0x1d00
>>> +#define APLIC_CLRIP_LAST        0x1d7c
>>> +#define APLIC_CLRIPNUM          0x1ddc
>>> +
>>> +#define APLIC_SETIE_BASE        0x1e00
>>> +#define APLIC_SETIE_LAST        0x1e7c
>>> +#define APLIC_SETIENUM          0x1edc
>>> +
>>> +#define APLIC_CLRIE_BASE        0x1f00
>>> +#define APLIC_CLRIE_LAST        0x1f7c
>>> +#define APLIC_CLRIENUM          0x1fdc
>>> +
>>> +#define APLIC_SETIPNUM_LE       0x2000
>>> +
>>> +#define APLIC_GENMSI            0x3000
>>> +
>>> +#define APLIC_TARGET_BASE       0x3004
>>> +#define APLIC_TARGET_LAST       0x3ffc
>>
>> ... the register definition itself. Would you mind taking a look at the top
>> third (or so) of arch/x86/include/asm/msr-index.h? There you'll find MSR
>> index values of MSRs we use, immediately followed by field definitions (of
>> course only where applicable). With such an arrangement, the extra comments
>> you add can easily be omitted.
> 
> I'll move the definitions mentioned above to the suggested location and 
> follow this pattern in future changes. I just thought it would be better 
> to keep the APLIC register definitions together in memory layout order.

Retaining that order is certainly wanted. Keeping them together is also wanted,
just with the bit/field definitions inserted accordingly.

Jan