[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] Problems starting xend



Hi

I have managed to fix my networking issues.

However, I am still having problems starting xend.

When I try and start xend via "sudo xend start" it appears to start
( and the log claims it has started )  :-

[2005-06-09 20:14:09 xend] INFO (SrvDaemon:610) Xend Daemon started
[2005-06-10 18:56:12 xend] INFO (SrvDaemon:610) Xend Daemon started
[2005-06-10 19:00:28 xend] INFO (SrvDaemon:610) Xend Daemon started
[2005-06-11 10:57:49 xend] INFO (SrvDaemon:610) Xend Daemon started
[2005-06-11 11:45:55 xend] INFO (SrvDaemon:610) Xend Daemon started
[2005-06-11 12:00:08 xend] INFO (SrvDaemon:610) Xend Daemon started



but "sudo xend status" shows nothing.

ifconfig shows :-

eth0      Link encap:Ethernet  HWaddr 00:0D:61:1A:E2:25  
          inet addr:81.77.153.206  Bcast:255.255.255.255
Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:161 errors:0 dropped:0 overruns:0 frame:0
          TX packets:246 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:24562 (23.9 KiB)  TX bytes:28627 (27.9 KiB)
          Interrupt:19 Base address:0xe000 

eth1      Link encap:Ethernet  HWaddr 00:04:5A:8C:67:6A  
          inet addr:192.168.0.1  Bcast:192.168.0.255  Mask:255.0.0.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 b)  TX bytes:1282 (1.2 KiB)
          Interrupt:17 Base address:0xe400 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:5717 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5717 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:1503288 (1.4 MiB)  TX bytes:1503288 (1.4 MiB)

xen-br0   Link encap:Ethernet  HWaddr 00:0D:61:1A:E2:25  
          inet addr:84.67.38.123  Bcast:255.255.255.255
Mask:255.255.255.255
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:138 errors:0 dropped:0 overruns:0 frame:0
          TX packets:56 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:16408 (16.0 KiB)  TX bytes:8254 (8.0 KiB)

which looks correct.


However, when I then try and start a new domain via

"xm create -c config vmid=1"

I get the following error :-


stewart@gateway:~$ xm create -c config vmid=1
Using config file "config".
(111, 'Connection refused')
Error: Error connecting to xend, is xend running?
stewart@gateway:~$

Any ideas what's going wrong here ?

Regards


Stewart




_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.