[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] Failed to Install



Hello

We have the following Configuration

Hardware:
IBM 346
Dual Xeon 3,4 Ghz
6 GB Ram
4 x 73,3 GB SCSI Disc (Raid5)
IBM Serveraid Adapter 7k

Software:
Debian Sarge

Kernel:
Modified Debian Kernel 2.6.8 with PAE support, Servraid, Nic and fs Driver build into the Kernel.

I tried to install Xen-Stable.

Result
Unable to mount root Filesystem.

I tried to build unstable from source

but the result was the same.

The Xen Kernel boots. It Seams without PAE which i activated in Config.mk. But thet is a lesser Problem.

The Configuration of Grub seems to be correct.

title Xen 3.0 / XenLinux 2.6.12
kernel          /boot/xen.gz dom0_mem=64000
module          /boot/vmlinuz-2.6-xen0 root=/dev/sda1 ro console=tty0

title           Debian GNU/Linux, kernel 2.6.8
root            (hd0,0)
kernel          /boot/vmlinuz-2.6.8 root=/dev/sda1 ro
initrd          /boot/initrd.img-2.6.8
savedefault
boot

The Kernel 2.6.8 works.

The Problem is that i dont see the detection of the Serveraid adpater if
dom0 ist booting.
so if the Adpater is not recognized the root fs will not be found.

Where do i have to configure the Options that the
dom0 Kernel uses the Drivers the actual Kernel uses?

Greets Dominik

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.