[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] Using modem in DomU
On Tuesday 23 August 2005 12:40, Denny Schierz wrote: > title Xen 2.0 / XenLinux 2.6.11 > kernel /boot/xen.gz dom0_mem=64000 physdev_dom0_hide='(00:2f.8)' > max_loop=32 module /boot/xen-linux-2.6.11.12-xen0.xen.kernel root=/dev/hda2 > ro > > i used the entries from dmesg: > > Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled > ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > ... > #pci=['00,2f,8'] The "pci" and "physdev_dom0_hide" parameters take PCI IDs as parameters (Bus number:device number:function, as displayed by "lspci"), not ISA Bus Port numbers. AFAIK sharing of ISA resources isn't implemented, so you'll have to use a PCI Serial Card or an USB->Serial converter if you want a real serial port under domU /Ernst _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |