[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] GFS into the kernel.


  • To: xen-users@xxxxxxxxxxxxxxxxxxx
  • From: Ghe Rivero <ghe.rivero@xxxxxxxxx>
  • Date: Thu, 15 Sep 2005 22:23:25 +0200
  • Delivery-date: Thu, 15 Sep 2005 20:19:07 +0000
  • Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:subject:from:to:in-reply-to:references:content-type:date:message-id:mime-version:x-mailer:content-transfer-encoding; b=RRTSXk74xouDaNLcEGIN1tPjASbRO4U8vCESDGmqLwgvHHoACE6rXkqEla7ToKqZ5pf1o6+kqaN0uqlgUSXGdaedkUbcdN1/027jXHHFgbcB5yQmnSiEvZYP5ELYLFXQWB+/vHI4sEQRIYYkE4lRCjgh2+TZGL+lPr8IgYNPNkE=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

Hi Andy,
        which version of Debian are you using? Xen 2.0 cannot be compiled on
etch, sid and Hoary cause it doesn't support gcc-4.0.

        Ghe Rivero

El jue, 15-09-2005 a las 18:40 +0100, Andy Davidson escribió:
> Mark Williamson wrote:
> > Does this procedure work for you when compiling a native x86 kernel (i.e. 
> > remove the Xenification?).
> 
> Thank you for replying.
> 
> I did all the steps requoted below except for using mkbuildtree - the 
> .config was the default one for 2.6.12 with DLM and GFS added rather 
> than my Xen .config - but i trust the .config as it's pulled from a 
> working box.
> 
> The kernel builds cleanly, but I didn't try booting it (the box is a few 
> miles away).
> 
> [...]
> 
> >>  - grabbed Linux 2.6.12 from kernel.org.
> >>
> >>  - patched in the -mm2 set for this version (gfs needs the dlm feature
> >>in this patchset.)
> >>
> >>  - patched in the gfs stuff from http://redhat.com/~teigland/gfs2
> 
> === missed the below steps
> >>  - used "xen-2.0-testing/linux-2.6-xen-sparse/mkbuildtree" to xenify my
> >>working copy of this kernel.
> 
> >>  - grabbed the /boot/config-2.6.11.10-xen0 file from my Xen host.
> >>Dropped it into the right place to use as a reference point for my new
> >>kernel.
> >>
> >>  - edited arch/xen/Kconfig.drivers and added a    source
> >>"drivers/dlm/Kconfig"   line underneath the 'menu' line towards the top
> >>of the file
> >>
> >>  - ran  ARCH=xen make menuconfig  and enabled DLM and GFS support.
> >>Sanity checked the rest of the config (e.g. ensured that my network hw
> >>was still listed as supported).
> 
> == ran make menuconfig as discussed above and continued below step
> 
> >>  - ran 'make-kpkg --append-to-version=xen0 --revision=ad1 --arch=xen
> >>kernel_image'
> 
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.