[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] MPT failure on booting into Dom0
I cannot boot my xen 3.0 master. It hangs on system startup: mptbase: Initiating ioc0 bringup ioc0: 53c130: Capabilities={Initiator} mptbase: Initiating ioc0 recovery qla2300 0000.04.02.0: Mailbox command timeout occured. Issuing ISP abort. qla2300 0000.04.02.0: Performing ISP error recovery - ha= c7e58254. qla2300 0000.04.02.0: LIP reset occured (f7f7). qla2300 0000.04.02.0: LOOP UP detected (2Gbps). qla2300 0000.04.02.0: scs(0:1:0) Abort command issued -- 2 2003 scsi: Device offlined - not reade after error recovery. host 2 channel 0 id 0 lun 0 mptscsih: ioc0. >> Attemting task abort! (sc=c7fef200) mptbase: Initiating ioc0 recovery mptbase: Initiating ioc0 recovery With standard kernel the system starts up without any problems. Here the used kernel modules: Module Size Used by ipv6 329728 12 edd 26848 0 tg3 118276 0 generic 20740 0 [permanent] ide_core 148816 1 generic i2c_i801 25100 0 i2c_core 37632 1 i2c_i801 ehci_hcd 51592 0 hw_random 21780 0 uhci_hcd 51856 0 usbcore 139392 3 ehci_hcd,uhci_hcd parport_pc 57668 0 lp 28068 0 parport 52680 2 parport_pc,lp dm_mod 75292 1 reiserfs 281712 1 processor 44648 0 st 57120 0 qla2300 140672 0 qla2xxx 141020 8 qla2300 firmware_class 26624 1 qla2xxx scsi_transport_fc 44800 1 qla2xxx mptspi 25096 0 mptscsih 52692 1 mptspi mptbase 61024 2 mptspi,mptscsih sg 54816 0 sr_mod 33572 1 cdrom 55200 1 sr_mod ata_piix 26244 1 libata 69252 1 ata_piix sd_mod 36096 13 scsi_mod 155240 9 st,qla2xxx,scsi_transport_fc,mptspi,mptscsih,sg, sr_mod,libata,sd_mod Is this a well known problem? Do someone know a workarround? Stephan _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |