[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] Centos + Xen 3.0 + Root on md = bad



Hey Lars,

I had the same problem. Fixed it with compiling the RAID modules
in (CONFIG_MD_*).

See:
http://marc.theaimsgroup.com/?l=xen-users&m=113439862419211&w=2

larsks.21230602@xxxxxxxxxxxxx wrote:
I'm trying to boot Xen 3.0 on a Centos 4(.2) system with root
on a software raid1 volume.  When booting the Xen kernel, 'raidautorun' in
the /init nash script fails to assemble either the root md or the raid5 md
containing my LVM volumes.



If I move root to /dev/hda1, the system boots
fine.  raidautorun still fails to assemble the md devices, but mdadm later
on in the boot process works just fine.



I see what looks like a similar
problem reported in May of this year with Xen 2.0.something.  Does this continue
to be a known problem?  I'm going to try adding mdadm to the initrd and see
if replacing 'raidautorun' with 'mdadm --assemble --scan' solves the problem,
but I'm curious if there are other solutions.



Thanks,



  -- Lars



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


--
  Taneli Leppà        | Crasman Co Ltd
  <taneli@xxxxxxxxxx>  | <http://www.crasman.fi/>

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.