[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] "netdev watchdog" error and non-working sis900 networkcard - solution



Ian Pratt wrote:
[...]
Xen and Linux must agree on whether they're using the ioapic/acpi or
not. If the apci= parameter goes on the xen command line, xen will also
add it to Linux's.

Using acpi=off is far from ideal -- its much better to use an ioapic if
you have one.

Is ioapic just another word for acpi?

[...]
Was you're problem that the network failed intermittently when allowing
the ioapic to be used? If so, I'm very interested. If it was just that
it didn't work at all then that suggests a bios bug (possibly solveable
by an upgrade), and isn't a big deal.

The network card was shown in "ifconfig" after putting it up. But it neither got any dhcp messages and couldn't be assigned an IP address, any try to access it, e.g. with ifconfig results in the "netdev watchdog" errors mentioned (see the diffs). So it looks like it's not working at all, not just intermittently.

I'll see if I can get a BIOS upgrade, or just live with it as it's only a testing machine which doesn't have to do anything especially reliable.


Thanks for the information.
Henning

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.