[Xen-users] XEN Networking Woes

["Nick Couchman" <Nick.Couchman@xxxxxxxxx>]

More issues with XEN networking.  Basically I'm running Xen 3.0 under Gentoo.  
When Xend starts and configures the bridge, I lose network connectivity.  I 
have an Intel ProV100 network card, eth0.  Xen creates the "peth0" as the 
physical network card and also creates vif0.0 and xenbr0 for the bridge.  The 
interfaces vif0.0 and xenbr0 get added to the bridge successfully.  The IP 
address is still assigned to the "eth0" device, but the machine is unable to 
talk to anything on the network.  Pinging it's own IP address works, but 
pinging any machine - whether or the same subnet or a different one fails.

Is there anything special or specific I need to do to get this working?

Thanks,


Nick Couchman
Systems Integrator
SEAKR Engineering, Inc.
6221 South Racine Circle
Centennial, CO 80111
Main: (303) 790-8499
Fax: (303) 790-8720
Web: http://www.seakr.com



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users