[Xen-users] Re: ctrl-c doesn't work in domU consoles

[Anders Siverby <ampe83@xxxxxxxxx>]

We had the same problem. I changed the line
0:2345:respawn:/sbin/qlogin /dev/ttys/0 root
to
0:2345:respawn:/sbin/qlogin /dev/tty1 root
in /etc/inittab on domU. We are using qlogin so I don't know if this 
applies to you but you could check it out.
/Anders

Moritz Bunkus wrote:
> Hey,
>
> I've installed Xen 3.0 on a freshly installed Debian Sarge. dom0 is
> working nicely (kernel 2.6.12.6-xen0). Then I created a domU, again with
> Debian Sarge, booting Xen's vmlinuz-2.6.12-xenU. Unfortunately ctrl-c
> does not work in the domU's console, neither if I create the domU
> with "xm create -c ..." nor if I attach to it later. It doesn't matter
> if I do this over ssh or directly on the dom0's console -- in both cases
> nothing happens if I press ctrl-c. Note that ctrl-] works and detaches
> the console normally.
>
> Any tips? Thanks in advance.
>
> Regards,
> Moritz
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users