[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] (domU) Device 0 (vif) could not be connected. Hotplug scripts not working.
Hi, i cant run domU, because of this error: xen xen # xm create -c client1 Using config file "client1". Error: Device 0 (vif) could not be connected. Hotplug scripts not working. my config file for the domU is: kernel = "/boot/linux-2.6.12-xenU" memory = 512 name = "domU" # doesnt change error type if i uncomment or i comment the following line... #vif = [ 'mac=aa:00:00:00:00:11, bridge=xenbr0' ] disk = [ 'phy:sda1,sda1,w' ] root = "/dev/sda1 ro" extra = "4" (like the default conf file...)i also installed udev, hotplug, bridge-utils, sysfsutils like said in other thread with the same problem... but nothing change... what's wrong? /var/log/messages: Jan 30 11:45:44 xen kernel: EXT3 FS on sda1, internal journal Jan 30 11:45:46 xen uptimed: created bootid: 1138621512 Jan 30 11:45:47 xen kernel: tg3: eth0: Link is up at 100 Mbps, full duplex.Jan 30 11:45:47 xen kernel: tg3: eth0: Flow control is off for TX and off for RX. Jan 30 11:46:08 xen kernel: device vif0.0 entered promiscuous mode Jan 30 11:46:08 xen kernel: bridge: can't decode speed from peth0: 0 Jan 30 11:46:08 xen kernel: device peth0 entered promiscuous mode Jan 30 11:46:08 xen kernel: xenbr0: port 1(vif0.0) entering learning state Jan 30 11:46:08 xen kernel: xenbr0: topology change detected, propagating Jan 30 11:46:08 xen kernel: xenbr0: port 1(vif0.0) entering forwarding state Jan 30 11:46:10 xen kernel: tg3: peth0: Link is up at 100 Mbps, full duplex.Jan 30 11:46:10 xen kernel: tg3: peth0: Flow control is off for TX and off for RX. Jan 30 11:46:10 xen kernel: xenbr0: port 2(peth0) entering learning state Jan 30 11:46:10 xen kernel: xenbr0: topology change detected, propagating Jan 30 11:46:10 xen kernel: xenbr0: port 2(peth0) entering forwarding state /var/log/xend.log:[2006-01-30 11:41:24 xend.XendDomainInfo] DEBUG (XendDomainInfo:177) XendDomainInfo.create(['vm', ['name', 'ClientDiProva'], ['memory', '512'], ['image', ['linux', ['kernel', '/boot/linux-2.6.12-xenU'], ['root', '/dev/sda1 ro'], ['args', '4'], ['vcpus', '1'], ['vcpus', '1'], ['boot', 'c'], ['nics', '2']]], ['device', ['vbd', ['uname', 'phy:sda1'], ['dev', 'sda1'], ['mode', 'w']]], ['device', ['vif']], ['device', ['vif']]]) [2006-01-30 11:41:24 xend.XendDomainInfo] DEBUG (XendDomainInfo:282) parseConfig: config is ['vm', ['name', 'ClientDiProva'], ['memory', '512'], ['image', ['linux', ['kernel', '/boot/linux-2.6.12-xenU'], ['root', '/dev/sda1 ro'], ['args', '4'], ['vcpus', '1'], ['vcpus', '1'], ['boot', 'c'], ['nics', '2']]], ['device', ['vbd', ['uname', 'phy:sda1'], ['dev', 'sda1'], ['mode', 'w']]], ['device', ['vif']], ['device', ['vif']]] [2006-01-30 11:41:24 xend.XendDomainInfo] DEBUG (XendDomainInfo:374) parseConfig: result is {'ssidref': None, 'uuid': None, 'on_crash': None, 'on_reboot': None, 'image': ['linux', ['kernel', '/boot/linux-2.6.12-xenU'], ['root', '/dev/sda1 ro'], ['args', '4'], ['vcpus', '1'], ['vcpus', '1'], ['boot', 'c'], ['nics', '2']], 'on_poweroff': None, 'cpus': None, 'name': 'ClientDiProva', 'backend': [], 'vcpus': 1, 'cpu_weight': None, 'vcpu_avail': None, 'memory': 512, 'device': [('vbd', ['vbd', ['uname', 'phy:sda1'], ['dev', 'sda1'], ['mode', 'w']]), ('vif', ['vif']), ('vif', ['vif'])], 'bootloader': None, 'cpu': None, 'maxmem': None} [2006-01-30 11:41:24 xend.XendDomainInfo] DEBUG (XendDomainInfo:1129) XendDomainInfo.construct: None 0 [2006-01-30 11:41:24 xend.XendDomainInfo] DEBUG (XendDomainInfo:1161) XendDomainInfo.initDomain: 9 1.0 [2006-01-30 11:41:24 xend] DEBUG (balloon:84) Balloon: free 1547; need 513; done. [2006-01-30 11:41:24 xend] INFO (image:132) buildDomain os=linux dom=9 vcpus=1 [2006-01-30 11:41:24 xend] DEBUG (image:170) dom = 9[2006-01-30 11:41:24 xend] DEBUG (image:171) image = /boot/linux-2.6.12-xenU [2006-01-30 11:41:24 xend] DEBUG (image:172) store_evtchn = 1 [2006-01-30 11:41:24 xend] DEBUG (image:173) console_evtchn = 2[2006-01-30 11:41:24 xend] DEBUG (image:174) cmdline = root=/dev/sda1 ro 4 [2006-01-30 11:41:24 xend] DEBUG (image:175) ramdisk = [2006-01-30 11:41:24 xend] DEBUG (image:176) vcpus = 1[2006-01-30 11:41:24 xend] DEBUG (DevController:104) DevController: writing {'virtual-device': '2049', 'backend-id': '0', 'state': '1', 'backend': '/local/domain/0/backend/vbd/9/2049'} to /local/domain/9/device/vbd/2049. [2006-01-30 11:41:24 xend] DEBUG (DevController:106) DevController: writing {'domain': 'ClientDiProva', 'frontend': '/local/domain/9/device/vbd/2049', 'dev': 'sda1', 'state': '1', 'params': 'sda1', 'mode': 'w', 'frontend-id': '9', 'type': 'phy'} to /local/domain/0/backend/vbd/9/2049. [2006-01-30 11:41:24 xend] DEBUG (DevController:104) DevController: writing {'backend-id': '0', 'mac': '00:16:3e:10:e5:5f', 'handle': '0', 'state': '1', 'backend': '/local/domain/0/backend/vif/9/0'} to /local/domain/9/device/vif/0. [2006-01-30 11:41:24 xend] DEBUG (DevController:106) DevController: writing {'mac': '00:16:3e:10:e5:5f', 'state': '1', 'handle': '0', 'script': '/etc/xen/scripts/vif-bridge', 'frontend-id': '9', 'domain': 'ClientDiProva', 'frontend': '/local/domain/9/device/vif/0'} to /local/domain/0/backend/vif/9/0. [2006-01-30 11:41:24 xend] DEBUG (DevController:104) DevController: writing {'backend-id': '0', 'mac': '00:16:3e:1d:40:8e', 'handle': '1', 'state': '1', 'backend': '/local/domain/0/backend/vif/9/1'} to /local/domain/9/device/vif/1. [2006-01-30 11:41:24 xend] DEBUG (DevController:106) DevController: writing {'mac': '00:16:3e:1d:40:8e', 'state': '1', 'handle': '1', 'script': '/etc/xen/scripts/vif-bridge', 'frontend-id': '9', 'domain': 'ClientDiProva', 'frontend': '/local/domain/9/device/vif/1'} to /local/domain/0/backend/vif/9/1. [2006-01-30 11:41:24 xend.XendDomainInfo] DEBUG (XendDomainInfo:661) Storing VM details: {'ssidref': '0', 'uuid': '236d893e-86f21df9-e5271fb6-cdbf77db', 'on_reboot': 'restart', 'start_time': '1138621284.98', 'on_poweroff': 'destroy', 'name': 'ClientDiProva', 'vcpus': '1', 'vcpu_avail': '1', 'memory': '512', 'on_crash': 'restart', 'image': "(linux (kernel /boot/linux-2.6.12-xenU) (root '/dev/sda1 ro') (args 4) (vcpus 1) (vcpus 1) (boot c) (nics 2))", 'maxmem': '512'} [2006-01-30 11:41:24 xend.XendDomainInfo] DEBUG (XendDomainInfo:686) Storing domain details: {'console/ring-ref': '902087', 'console/port': '2', 'name': 'ClientDiProva', 'console/limit': '1048576', 'vm': '/vm/236d893e-86f21df9-e5271fb6-cdbf77db', 'domid': '9', 'cpu/0/availability': 'online', 'memory/target': '524288', 'store/ring-ref': '902088', 'store/port': '1'} [2006-01-30 11:41:25 xend] DEBUG (DevController:133) Waiting for devices vif. [2006-01-30 11:41:25 xend] DEBUG (DevController:139) Waiting for 0.[2006-01-30 11:41:25 xend] DEBUG (DevController:409) hotplugStatusCallback /local/domain/0/backend/vif/9/0/hotplug-status. [2006-01-30 11:41:35 xend] ERROR (SrvBase:87) Request wait_for_devices failed. Traceback (most recent call last): File "/usr/lib/python/xen/web/SrvBase.py", line 85, in perform return op_method(op, req)File "/usr/lib/python/xen/xend/server/SrvDomain.py", line 72, in op_wait_for_devices return self.dom.waitForDevices()File "/usr/lib/python/xen/xend/XendDomainInfo.py", line 1349, in waitForDevices self.waitForDevices_(c)File "/usr/lib/python/xen/xend/XendDomainInfo.py", line 977, in waitForDevices_ return self.getDeviceController(deviceClass).waitForDevices()File "/usr/lib/python/xen/xend/server/DevController.py", line 135, in waitForDevices return map(self.waitForDevice, self.deviceIDs())File "/usr/lib/python/xen/xend/server/DevController.py", line 145, in waitForDevice raise VmError("Device %s (%s) could not be connected. " VmError: Device 0 (vif) could not be connected. Hotplug scripts not working. thank you for the help Enrico _________________________________________________________________ Blocca le pop-up pubblicitarie con MSN Toolbar! http://toolbar.msn.it/ _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |