Re: [Xen-users] AMD-8131

[Sebastian Böhm <seb@xxxxxxxx>]

Hi,

could it be that the bridge not gets detected cause I boot with the 
"noapic" option ?
I boot the native kernel also with "noapic" and there it gets detected, 
but maybe under xen this behaves differend.
I need "noapic", because otherwise sata_nv would crash.

/sebastian

Sebastian Böhm schrieb:
> > Can you verify that any config options for your board that are enabled in your 
> > native Linux build are also enabled under the Xen 3-patched Linux kernel?
> >   
> 100% sure.
>
> I tested also with the http://xenbits.xensource.com/linux-2.6-xen.hg 
> kernel.
> I made one with "Xen-Compatible" and one with "PC-Compatible", so all 
> device options are 100% the same.
> The direct-booted "PC-Compatible" Kernel detected the PCI-Bus behind 
> that amd-8131 bridge, the "Xen-Compatible" kernel booted with 
> xen3-unstable did not detect the PCI-X Bridge and all devices behind it.
> So there must be a problem with xen, I presume.
>
> /sebastian
> > Cheers,
> > Mark
> >
> >   
> ------------------------------------------------------------------------
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users