Re: [Xen-users] Re: Dom0 lvm/software raid rhel4.1 booting issues.

[Michael Montgomery <mmontgomery@xxxxxxxxxxxxx>]

http://lists.xensource.com/archives/html/xen-users/2006-02/msg00053.html

I believe the above answers the question.  Sorry for the multiple posts.

Michael Montgomery wrote:
> Well I reinstalled only making root a software raid, and now I get this 
> kernel panic, which basically states
> raidautorun: RAID_AUTORUN failed: 19
> raidautorun: RAID_AUTORUN failed: 19
> raidautorun: RAID_AUTORUN failed: 19
>
> Does anyone have any ideas why it would do this?
>
> ----------------------------------------
>
> Red Hat nash version 4.2.1.6 starting
> Mounted /proc filesystem
> Mounting sysfs
> Creating /dev
> Starting udev
> Loading scsi_mod.ko module
> scsi_mod: no version for "struct_module" found: kernel tainted.
> SCSI subsystem initialized
> Loading sd_mod.ko module
> Loading mptbase.ko module
> Fusion MPT base driver 3.01.20
> Copyright (c) 1999-2004 LSI Logic Corporation
> ACPI: PCI Interrupt 0000:04:05.0[A] -> GSI 18 (level, low) -> IRQ 18
> mptbase: Initiating ioc0 bringup
> ioc0: 53C1030: Capabilities={Initiator,Target}
> ACPI: PCI Interrupt 0000:04:05.1[B] -> GSI 19 (level, low) -> IRQ 19
> mptbase: Initiating ioc1 bringup
> ioc1: 53C1030: Capabilities={Initiator,Target}
> Loading mptscsih.ko module
> Fusion MPT SCSI Host driver 3.01.20
> scsi0 : ioc0: LSI53C1030, FwRev=01032300h, Ports=1, MaxQ=255, IRQ=18
>   Vendor: FUJITSU   Model: MAP3735NC         Rev: 5608
>   Type:   Direct-Access                      ANSI SCSI revision: 03
> SCSI device sda: 143374650 512-byte hdwr sectors (73408 MB)
> SCSI device sda: drive cache: write through
> SCSI device sda: 143374650 512-byte hdwr sectors (73408 MB)
> SCSI device sda: drive cache: write through
>  sda: sda1 sda2 sda3 sda4 < sda5 >
> Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>   Vendor: FUJITSU   Model: MAP3735NC         Rev: 5608
>   Type:   Direct-Access                      ANSI SCSI revision: 03
> SCSI device sdb: 143374650 512-byte hdwr sectors (73408 MB)
> SCSI device sdb: drive cache: write through
> SCSI device sdb: 143374650 512-byte hdwr sectors (73408 MB)
> SCSI device sdb: drive cache: write through
>  sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
> Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
>   Vendor: FUJITSU   Model: MAP3735NC         Rev: 5608
>   Type:   Direct-Access                      ANSI SCSI revision: 03
> SCSI device sdc: 143374650 512-byte hdwr sectors (73408 MB)
> SCSI device sdc: drive cache: write through
> SCSI device sdc: 143374650 512-byte hdwr sectors (73408 MB)
> SCSI device sdc: drive cache: write through
>  sdc: sdc1
> Attached scsi disk sdc at scsi0, channel 0, id 2, lun 0
>   Vendor: PE/PV     Model: 1x3 SCSI BP       Rev: 1.1
>   Type:   Processor                          ANSI SCSI revision: 02
> scsi1 : ioc1: LSI53C1030, FwRev=01032300h, Ports=1, MaxQ=255, IRQ=19
> Loading dm-mod.ko module
> device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@xxxxxxxxxx
> Loading md.ko module
> md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
> Loading raid1.ko module
> md: raid1 personality registered as nr 3
> Loading jbd.ko module
> Loading ext3.ko module
> raidautorun: RAID_AUTORUN failed: 19
> raidautorun: RAID_AUTORUN failed: 19
> raidautorun: RAID_AUTORUN failed: 19
> Creating root device
> Mounting root filesystem
> EXT3-fs: unable to read superblock
> mount: error 22 mounting ext3
> mount: error 2 mounting none
> Switching to new root
> switchroot: mount failed: 22
> umount /initrd/dev failed: 2
> Kernel panic - not syncing: Attempted to kill init!
>  (XEN) Domain 0 shutdown: rebooting machine.
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
--
Michael Montgomery
Systems Administrator
http://theplanet.com

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users