Re: [Xen-users] Re: Dom0 lvm/software raid rhel4.1 booting issues.

[Michael Montgomery <mmontgomery@xxxxxxxxxxxxx>]

Well I reinstalled only making root a software raid, and now I get this 
kernel panic, which basically states
raidautorun: RAID_AUTORUN failed: 19
raidautorun: RAID_AUTORUN failed: 19
raidautorun: RAID_AUTORUN failed: 19

Does anyone have any ideas why it would do this?

----------------------------------------

Red Hat nash version 4.2.1.6 starting
Mounted /proc filesystem
Mounting sysfs
Creating /dev
Starting udev
Loading scsi_mod.ko module
scsi_mod: no version for "struct_module" found: kernel tainted.
SCSI subsystem initialized
Loading sd_mod.ko module
Loading mptbase.ko module
Fusion MPT base driver 3.01.20
Copyright (c) 1999-2004 LSI Logic Corporation
ACPI: PCI Interrupt 0000:04:05.0[A] -> GSI 18 (level, low) -> IRQ 18
mptbase: Initiating ioc0 bringup
ioc0: 53C1030: Capabilities={Initiator,Target}
ACPI: PCI Interrupt 0000:04:05.1[B] -> GSI 19 (level, low) -> IRQ 19
mptbase: Initiating ioc1 bringup
ioc1: 53C1030: Capabilities={Initiator,Target}
Loading mptscsih.ko module
Fusion MPT SCSI Host driver 3.01.20
scsi0 : ioc0: LSI53C1030, FwRev=01032300h, Ports=1, MaxQ=255, IRQ=18
  Vendor: FUJITSU   Model: MAP3735NC         Rev: 5608
  Type:   Direct-Access                      ANSI SCSI revision: 03
SCSI device sda: 143374650 512-byte hdwr sectors (73408 MB)
SCSI device sda: drive cache: write through
SCSI device sda: 143374650 512-byte hdwr sectors (73408 MB)
SCSI device sda: drive cache: write through
 sda: sda1 sda2 sda3 sda4 < sda5 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
  Vendor: FUJITSU   Model: MAP3735NC         Rev: 5608
  Type:   Direct-Access                      ANSI SCSI revision: 03
SCSI device sdb: 143374650 512-byte hdwr sectors (73408 MB)
SCSI device sdb: drive cache: write through
SCSI device sdb: 143374650 512-byte hdwr sectors (73408 MB)
SCSI device sdb: drive cache: write through
 sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
  Vendor: FUJITSU   Model: MAP3735NC         Rev: 5608
  Type:   Direct-Access                      ANSI SCSI revision: 03
SCSI device sdc: 143374650 512-byte hdwr sectors (73408 MB)
SCSI device sdc: drive cache: write through
SCSI device sdc: 143374650 512-byte hdwr sectors (73408 MB)
SCSI device sdc: drive cache: write through
 sdc: sdc1
Attached scsi disk sdc at scsi0, channel 0, id 2, lun 0
  Vendor: PE/PV     Model: 1x3 SCSI BP       Rev: 1.1
  Type:   Processor                          ANSI SCSI revision: 02
scsi1 : ioc1: LSI53C1030, FwRev=01032300h, Ports=1, MaxQ=255, IRQ=19
Loading dm-mod.ko module
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@xxxxxxxxxx
Loading md.ko module
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
Loading raid1.ko module
md: raid1 personality registered as nr 3
Loading jbd.ko module
Loading ext3.ko module
raidautorun: RAID_AUTORUN failed: 19
raidautorun: RAID_AUTORUN failed: 19
raidautorun: RAID_AUTORUN failed: 19
Creating root device
Mounting root filesystem
EXT3-fs: unable to read superblock
mount: error 22 mounting ext3
mount: error 2 mounting none
Switching to new root
switchroot: mount failed: 22
umount /initrd/dev failed: 2
Kernel panic - not syncing: Attempted to kill init!
 (XEN) Domain 0 shutdown: rebooting machine. 


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users