[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] Xen 3.0.1 on Debian sarge kernel crash on Dual XEON Machine


  • To: xen-users@xxxxxxxxxxxxxxxxxxx
  • From: Ralf Schenk <rs@xxxxxxxxxx>
  • Date: Tue, 21 Mar 2006 11:11:48 +0100
  • Delivery-date: Tue, 21 Mar 2006 10:13:18 +0000
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

Hello !

I'm using the latest xen packages from
http://packages.debianbase.de/sarge/amd64/xen3/ on debian sarge
with the provided kernel linux-xen0-2.6_2.6.12+xen3.0.1-0tha6_amd64.deb
(xen-linux-2.6.12.6-xen).

I successfully installed that combo on a Tyan GT20 Server with an
Athlon64 3000+ (Venice), 1GB RAM . Thats running fine, I made some
debootstrapped filebased debian sarge systems with xen-tools - no problem.

Thanks to Ralph Passgang for this nice compilation !

However this was only testing - My real machines are a twin of
Supermicro servers (Equipped with mainboard X6DHR-TG
(http://www.supermicro.com/products/motherboard/Xeon800/E7520/X6DHR-TG.cfm).
2x XEON 3,2 EMT64 with 4 GB RAM and SATA RAID1 (HW-Raid aacraid).
Chipset is Intel 7520 (Lindenhurst).

These machines are normally running sarge (64bit) and kernel
2.6.8-11-em64t-p4-smp for one year without problems.

I installed the same packages, created initrd and so on and tried to
boot the system with Dom0 with xen-linux-2.6.12.6-xen.

XEN loads and starts to boot up the kernel but then the kernel crashes.
I connected a serial console and logged the output (see attachement).

I played around with various xen and kernel parameters like acpi=off,
noirqbalance, nosmp, nousb, noapic, apic=..... with no success.

I thought of an ACPI related problem and updated system bios to latest
bios from January 2006. Nothing helped. If I want to boot to my normal
system after such a crash I've to power the machine off (not reboot !)
and erase the BIOS PCI Tables (ESDT Tables) to get it up and running
again. If I don't do this even the standard kernel crashes while
initalising.

I downloaded latest xenoppix and booted the system off the cd. This
works ! It uses the 2 CPU's (plus the 2 HT CPU's), since it is 32-bit
with no PAE extensions I can only use 3 GB of my physical RAM. Also the
provided knoppixU DomU boots up fine.

After 2 days of rebooting this system I've no more ideas. I can use the
xen console to provide other information if needed.

-- 
__________________________________________________

Ralf Schenk
fon (02 41) 9 91 21-0
fax (02 41) 9 91 21-59
rs@xxxxxxxxxx

Databay AG
Hüttenstraße 7
D-52068 Aachen
www.databay.de

Sitz/Amtsgericht Aachen
HRB:8437
USt-IdNr.: DE 210844202

Databay - einfach machen.

_________________________________________________

Diese E-Mail und etwa angehängte Dateien enthalten vertrauliche
Informationen und sind ausschließlich für den Adressaten bestimmt.
Sollten Sie irrtümlich diese E-Mail erhalten haben, bitten wir Sie,
uns darüber unter info@xxxxxxxxxx zu informieren und die E-Mail
aus Ihrem System zu löschen.

This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
info@xxxxxxxxxxx If you are not the named recipient, you should return
this message and delete it from your system.
  Booting 'Xen 3.0.1 - Linux 2.6.12.6-xen'

root            (hd0,0)
 Filesystem type is ext2fs, partition type 0x83
kernel          /xen-3.0.1.gz dom0_mem=262144 com1=115200,8n1
   [Multiboot-elf, <0x100000:0x78408:0x2ebf8>, shtab=0x1a7078, entry=0x100000]
module          /xen-linux-2.6.12.6-xen root=/dev/mapper/system-system ro 
console=ttyS0,115200 console=tty0
   [Multiboot-module @ 0x1a8000, 0x5e3660 bytes]
module          /xen-modules-2.6.12.6-xen
   [Multiboot-module__  __            _____  ___   _
 \ \/ /___ _ __   |___ / / _ \ / |
  \  // _ \ '_ \    |_ \| | | || |
  /  \  __/ | | |  ___) | |_| || |
 /_/\_\___|_| |_| |____(_)___(_)_|

 http://www.cl.cam.ac.uk/netos/xen
 University of Cambridge Computer Laboratory

 Xen version 3.0.1 (root@localdomain) (gcc version 3.3.5 (Debian 1:3.3.5-13)) T6
 Latest ChangeSet: Sun Mar 12 19:36:00 2006 +0100

(XEN) Physical RAM map:
(XEN)  0000000000000000 - 0000000000099400 (usable)
(XEN)  0000000000099400 - 00000000000a0000 (reserved)
(XEN)  00000000000ce000 - 00000000000d0000 (reserved)
(XEN)  00000000000e4000 - 0000000000100000 (reserved)
(XEN)  0000000000100000 - 00000000cff70000 (usable)
(XEN)  00000000cff70000 - 00000000cff78000 (ACPI data)
(XEN)  00000000cff78000 - 00000000cff80000 (ACPI NVS)
(XEN)  00000000cff80000 - 00000000d0000000 (reserved)
(XEN)  00000000e0000000 - 00000000f0000000 (reserved)
(XEN)  00000000fec00000 - 00000000fec10000 (reserved)
(XEN)  00000000fee00000 - 00000000fee01000 (reserved)
(XEN)  00000000ff800000 - 00000000ffc00000 (reserved)
(XEN)  00000000fffffc00 - 0000000100000000 (reserved)
(XEN)  0000000100000000 - 0000000130000000 (usable)
(XEN) System RAM: 4095MB (4193316kB)
(XEN) Xen heap: 14MB (14536kB)
(XEN) Using scheduler: Simple EDF Scheduler (sedf)
(XEN) found SMP MP-table at 000f5d90
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: RSDP (v000 PTLTD                                 ) @ 0x00000000000f0
(XEN) ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x000000004
(XEN) ACPI: FADT (v001 INTEL  LINDHRST 0x06040000 PTL  0x00000003) @ 0x000000008
(XEN) ACPI: MADT (v001 PTLTD     APIC   0x06040000  LTP 0x00000000) @ 0x0000000c
(XEN) ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x000000008
(XEN) ACPI: SPCR (v001 PTLTD  $UCRTBL$ 0x06040000 PTL  0x00000001) @ 0x000000000
(XEN) ACPI: MCFG (v001 PTLTD     MCFG   0x06040000  LTP 0x00000000) @ 0x00000000
(XEN) ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20030224) @ 0x000000000
(XEN) ACPI: DSDT (v001  Intel LINDHRST 0x06040000 MSFT 0x0100000e) @ 0x000000000
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
(XEN) Processor #6 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
(XEN) Processor #7 15:4 APIC version 20
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
(XEN) IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47
(XEN) ACPI: IOAPIC (id[0x04] address[0xfec80400] gsi_base[48])
(XEN) IOAPIC[2]: apic_id 4, version 32, address 0xfec80400, GSI 48-71
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode:  Flat.  Using 3 I/O APICs
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Initializing CPU#0
(XEN) Detected 3200.295 MHz processor.
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 1024K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU0: Intel(R) Xeon(TM) CPU 3.20GHz stepping 01
(XEN) Booting processor 1/1 eip 90000
(XEN) Initializing CPU#1
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 1024K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU1: Intel(R) Xeon(TM) CPU 3.20GHz stepping 01
(XEN) Booting processor 2/6 eip 90000
(XEN) Initializing CPU#2
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 1024K
(XEN) CPU: Physical Processor ID: 3
(XEN) CPU2: Intel(R) Xeon(TM) CPU 3.20GHz stepping 01
(XEN) Booting processor 3/7 eip 90000
(XEN) Initializing CPU#3
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 1024K
(XEN) CPU: Physical Processor ID: 3
(XEN) CPU3: Intel(R) Xeon(TM) CPU 3.20GHz stepping 01
(XEN) Total of 4 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) ..TIMER: vector=0x31 pin1=2 pin2=-1
(XEN) checking TSC synchronization across 4 CPUs: passed.
(XEN) Platform timer is 1.193MHz PIT
(XEN) Brought up 4 CPUs
(XEN) mtrr: v2.0 (20020519)
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen-ELF header found: 'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=xen-3.0,VIRT_'
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Dom0 alloc.:   0000000005000000->0000000006000000 (61440 pages to be all)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: ffffffff80100000->ffffffff804dbc60
(XEN)  Init. ramdisk: ffffffff804dc000->ffffffff808dc000
(XEN)  Phys-Mach map: ffffffff808dc000->ffffffff8095c000
(XEN)  Start info:    ffffffff8095c000->ffffffff8095d000
(XEN)  Page tables:   ffffffff8095d000->ffffffff80966000
(XEN)  Boot stack:    ffffffff80966000->ffffffff80967000
(XEN)  TOTAL:         ffffffff80000000->ffffffff80c00000
(XEN)  ENTRY ADDRESS: ffffffff80100000
(XEN) Initrd len 0x400000, start at 0xffffffff804dc000
(XEN) Scrubbing Free RAM: .................................................done.
(XEN) Xen trace buffers: disabled
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xe.
Linux version 2.6.12.6-xen (root@pc1) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #6
kernel direct mapping tables upto 10800000 @ 966000-9ec000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47
ACPI: IOAPIC (id[0x04] address[0xfec80400] gsi_base[48])
IOAPIC[2]: apic_id 4, version 32, address 0xfec80400, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Setting APIC routing to xen
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
Built 1 zonelists
Kernel command line: root=/dev/mapper/system-system ro console=ttyS0,1150
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 65536 bytes)
Xen reported: 3200.110 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Software IO TLB enabled:
 Aperture:     64 megabytes
 Bus range:    0x000000000c000000 - 0x0000000010000000
 Kernel range: 0xffff88000153b000 - 0xffff88000553b000
Memory: 181248k/270336k available (2279k kernel code, 88408k reserved, 944k dat)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
Initializing CPU#1
Initializing CPU#2
Brought up 4 CPUs
Initializing CPU#3
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like d
Grant table initialized
NET: Registered protocol family 16
PCI: Using configuration type 1
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 *10 11 14 15)
xen_mem: Initialising balloon driver.
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
IA-32 Microcode Update Driver: v1.14-xen <tigran@xxxxxxxxxxx>
Simple Boot Flag at 0x39 set to 0x1
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
Real Time Clock Driver v1.12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Xen virtual console successfully installed as ttyS0
Event-channel device installed.
blkif_init: reqs=64, pages=704, mmap_vstart=0xffff88000f400000
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x14a0-0x14a7, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x14a8-0x14af, BIOS settings: hdc:DMA, hdd:pio
hdc: CD-224E, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 16Kbytes
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4096KiB [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
input: AT Translated Set 2 keyboard on isa0060/serio0
Red Hat/Adaptec aacraid driver (1.1.2-lk2 Mar 14 2006)
ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 58 (level, low) -> IRQ 58
AAC0: kernel 4.2-0[7673]
AAC0: monitor 4.2-0[7673]
AAC0: bios 4.2-0[7673]
AAC0: serial c0b2b0
AAC0: Non-DASD support enabled.
AAC0: 64bit support enabled.
AAC0: 64 Bit DAC enabled
scsi0 : aacraid
  Vendor: ADAPTEC   Model: SYSTEM            Rev: V1.0
  Type:   Direct-Access                      ANSI SCSI revision: 02
SCSI device sda: 488279040 512-byte hdwr sectors (249999 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write through
SCSI device sda: 488279040 512-byte hdwr sectors (249999 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write through
 sda: sda1 sda2 < sda5 >
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@xxxxxxxxxx
Intel(R) PRO/1000 Network Driver - version 6.0.54-k2-NAPI
Copyright (c) 1999-2004 Intel Corporation.
ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 30 (level, low) -> IRQ 30
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt 0000:02:03.1[B] -> GSI 31 (level, low) -> IRQ 31
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001400
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001420
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001440
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001460
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 4-0:1.0: over-current change on port 1
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd4001000
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
hub 4-0:1.0: over-current change on port 2
hub 5-0:1.0: over-current change on port 7
hub 5-0:1.0: over-current change on port 8
Kernel panic - not syncing: Attempted to kill init!
 <0>general protection fault: 0000 [1] SMP
CPU 0
Modules linked in: ext3 jbd reiserfs ehci_hcd uhci_hcd e1000 dm_mod aacraid
Pid: 22, comm: kacpid Not tainted 2.6.12.6-xen
RIP: e030:[<ffffffff80117460>] <ffffffff80117460>{smp_really_stop_cpu+16}
RSP: e02b:ffff88000ff059e8  EFLAGS: 00010246
RAX: ffffffffff578000 RBX: 0000000000000000 RCX: ffff880080f53f60
RDX: ffffffff80117450 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: ffff880000b98400
R10: 00000000ffffffff R11: 0000002000000000 R12: ffff88000ff05ac8
R13: 0000000000000102 R14: 0000000000000000 R15: ffff88000ff05ac8
FS:  00002aaaab00c4a0(0000) GS:ffffffff80497180(0000) knlGS:ffffffff80497180
CS:  e033 DS: 0000 ES: 0000
Process kacpid (pid: 22, threadinfo ffff88000ff04000, task ffff88000fcf3580)
Stack: 00000000ffff8f2a ffffffff8011753e ffff8800009468c0 ffffffff801560dc
       0000000000008100 0000000000000102 ffffffff804a0200 ffffffff804a0228
       ffff8800009468c0 ffffffff801561f8
Call Trace:<ffffffff8011753e>{smp_call_function_interrupt+62} <ffffffff801560dc}
       <ffffffff801561f8>{__do_IRQ+200} <ffffffff80116e04>{do_IRQ+52}
       <ffffffff8010e9b4>{evtchn_do_upcall+180} <ffffffff80113a3d>{do_hyperviso}
       <ffffffff8020af4e>{acpi_os_read_port+38} <ffffffff802172c9>{acpi_hw_low_}
       <ffffffff80210dce>{acpi_ev_gpe_detect+121} <ffffffff8020f786>{acpi_ev_sc}
       <ffffffff8020ade9>{acpi_irq+14} <ffffffff801560dc>{handle_IRQ_event+76}
       <ffffffff801561f8>{__do_IRQ+200} <ffffffff80116e04>{do_IRQ+52}
       <ffffffff8010e9b4>{evtchn_do_upcall+180} <ffffffff80113a3d>{do_hyperviso}
       <ffffffff803357f6>{schedule+374} <ffffffff80335775>{schedule+245}
       <ffffffff80220c66>{acpi_ut_release_mutex+116} <ffffffff80220bd3>{acpi_ut}
       <ffffffff80220c66>{acpi_ut_release_mutex+116} <ffffffff802187f1>{acpi_ge}
       <ffffffff80130fa3>{__wake_up+67} <ffffffff8020b2c0>{acpi_os_execute_defe}
       <ffffffff801478ee>{worker_thread+270} <ffffffff80130ee0>{default_wake_fu}
       <ffffffff80130f33>{__wake_up_common+67} <ffffffff80130ee0>{default_wake_}
       <ffffffff8014c240>{keventd_create_kthread+0} <ffffffff801477e0>{worker_t}
       <ffffffff8014c240>{keventd_create_kthread+0} <ffffffff8014c202>{kthread+}
       <ffffffff80113cab>{child_rip+8} <ffffffff8014c240>{keventd_create_kthrea}
       <ffffffff8014c170>{kthread+0} <ffffffff80113ca3>{child_rip+0}


Code: f4 eb fd 66 66 66 90 66 66 90 66 66 90 66 66 90 53 48 c7 c7
RIP <ffffffff80117460>{smp_really_stop_cpu+16} RSP <ffff88000ff059e8>
 <0>Kernel panic - not syncing: Aiee, killing interrupt handler!
general protection fault: 0000 [2] SMP
CPU 3
Modules linked in: ext3 jbd reiserfs ehci_hcd uhci_hcd e1000 dm_mod aacraid
Pid: 0, comm: swapper Not tainted 2.6.12.6-xen
RIP: e030:[<ffffffff80117460>] <ffffffff80117460>{smp_really_stop_cpu+16}
RSP: e02b:ffff88000090fd98  EFLAGS: 00010246
RAX: ffffffffff5780c0 RBX: 0000000000000000 RCX: ffff880080f6bf60
RDX: ffffffff80117450 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 00000000ffff8f2b R09: 00000000ffff8f2b
R10: 0000000000000000 R11: 0000000000000246 R12: ffff88000090fe78
R13: 000000000000010a R14: 0000000000000000 R15: ffff88000090fe78
FS:  00002aaaaae00640(0000) GS:ffffffff80497300(0000) knlGS:ffffffff80497300
CS:  e033 DS: 002b ES: 002b
Process swapper (pid: 0, threadinfo ffff88000090e000, task ffff880000900030)
Stack: ffff8800014470a0 ffffffff8011753e ffff8800008ead80 ffffffff801560dc
       0000000000008500 000000000000010a ffffffff804a0600 ffffffff804a0628
       ffff8800008ead80 ffffffff801561f8
Call Trace:<ffffffff8011753e>{smp_call_function_interrupt+62} <ffffffff801560dc}
       <ffffffff801561f8>{__do_IRQ+200} <ffffffff80116e04>{do_IRQ+52}
       <ffffffff8010e9b4>{evtchn_do_upcall+180} <ffffffff80113a3d>{do_hyperviso}
       <ffffffff8010d0ca>{hypercall_page+202} <ffffffff8010d0ca>{hypercall_page}
       <ffffffff80110f51>{xen_idle+113} <ffffffff80110f9d>{cpu_idle+61}


Code: f4 eb fd 66 66 66 90 66 66 90 66 66 90 66 66 90 53 48 c7 c7
RIP <ffffffff80117460>{smp_really_stop_cpu+16} RSP <ffff88000090fd98>
 <0>Kernel panic - not syncing: Aiee, killing interrupt handler!
 <0>general protection fault: 0000 [3] SMP
CPU 1
Modules linked in: ext3 jbd reiserfs ehci_hcd uhci_hcd e1000 dm_mod aacraid
Pid: 0, comm: swapper Not tainted 2.6.12.6-xen
RIP: e030:[<ffffffff80117460>] <ffffffff80117460>{smp_really_stop_cpu+16}
RSP: e02b:ffff880000909d98  EFLAGS: 00010246
RAX: ffffffffff578040 RBX: 0000000000000000 RCX: ffff880080f5bf60
RDX: ffffffff80117450 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 00000000ffff8f2d R09: 00000000ffff8f2d
R10: 0000000000000000 R11: 0000000000000246 R12: ffff880000909e78
R13: 0000000000000104 R14: 0000000000000000 R15: ffff880000909e78
FS:  00002aaaaae00640(0000) GS:ffffffff80497200(0000) knlGS:ffffffff80497200
CS:  e033 DS: 002b ES: 002b
Process swapper (pid: 0, threadinfo ffff880000908000, task ffff880000900d90)
Stack: 0000000000000105 ffffffff8011753e ffff880000946400 ffffffff801560dc
       0000000000008200 0000000000000104 ffffffff804a0300 ffffffff804a0328
       ffff880000946400 ffffffff801561f8
Call Trace:<ffffffff8011753e>{smp_call_function_interrupt+62} <ffffffff801560dc}
       <ffffffff801561f8>{__do_IRQ+200} <ffffffff80116e04>{do_IRQ+52}
       <ffffffff8010e9b4>{evtchn_do_upcall+180} <ffffffff80113a3d>{do_hyperviso}
       <ffffffff8010d0ca>{hypercall_page+202} <ffffffff8010d0ca>{hypercall_page}
       <ffffffff80110f51>{xen_idle+113} <ffffffff80110f9d>{cpu_idle+61}


Code: f4 eb fd 66 66 66 90 66 66 90 66 66 90 66 66 90 53 48 c7 c7
RIP <ffffffff80117460>{smp_really_stop_cpu+16} RSP <ffff880000909d98>
 <0>Kernel panic - not syncing: Aiee, killing interrupt handler!
 Badness in do_unblank_screen at drivers/char/vt.c:2822

Call Trace:<ffffffff8023a029>{do_unblank_screen+73} <ffffffff8011f1dc>{bust_spi}
       <ffffffff80135dd6>{panic+198} <ffffffff80114430>{show_stack+192}
       <ffffffff80114549>{show_registers+233} <ffffffff80239ff5>{do_unblank_scr}
       <ffffffff80138ed5>{do_exit+85} <ffffffff801147e5>{die+69}
       <ffffffff8011520e>{do_general_protection+302} <ffffffff8011399f>{error_e}
       <ffffffff80117450>{smp_really_stop_cpu+0} <ffffffff80117460>{smp_really_}
       <ffffffff80117459>{smp_really_stop_cpu+9} <ffffffff8011753e>{smp_call_fu}
       <ffffffff801560dc>{handle_IRQ_event+76} <ffffffff801561f8>{__do_IRQ+200}
       <ffffffff80116e04>{do_IRQ+52} <ffffffff8010e9b4>{evtchn_do_upcall+180}
       <ffffffff80113a3d>{do_hypervisor_callback+17} <ffffffff8020af4e>{acpi_os}
       <ffffffff802172c9>{acpi_hw_low_level_read+119} <ffffffff80210dce>{acpi_e}
       <ffffffff8020f786>{acpi_ev_sci_xrupt_handler+22} <ffffffff8020ade9>{acpi}
       <ffffffff801560dc>{handle_IRQ_event+76} <ffffffff801561f8>{__do_IRQ+200}
       <ffffffff80116e04>{do_IRQ+52} <ffffffff8010e9b4>{evtchn_do_upcall+180}
       <ffffffff80113a3d>{do_hypervisor_callback+17} <ffffffff803357f6>{schedul}
       <ffffffff80335775>{schedule+245} <ffffffff80220c66>{acpi_ut_release_mute}
       <ffffffff80220bd3>{acpi_ut_acquire_mutex+58} <ffffffff80220c66>{acpi_ut_}
       <ffffffff802187f1>{acpi_get_data+97} <ffffffff80130fa3>{__wake_up+67}
       <ffffffff8020b2c0>{acpi_os_execute_deferred+0} <ffffffff801478ee>{worker}
       <ffffffff80130ee0>{default_wake_function+0} <ffffffff80130f33>{__wake_up}
       <ffffffff80130ee0>{default_wake_function+0} <ffffffff8014c240>{keventd_c}
       <ffffffff801477e0>{worker_thread+0} <ffffffff8014c240>{keventd_create_kt}
       <ffffffff8014c202>{kthread+146} <ffffffff80113cab>{child_rip+8}
       <ffffffff8014c240>{keventd_create_kthread+0} <ffffffff8014c170>{kthread+}
       <ffffffff80113ca3>{child_rip+0}

 CTRL-A Z for help |115200 8N1 | NOR | Minicom 2.1    | VT102 | Online 00:01
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.