[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] Xen reboots



Hello Seneca

here is the requested information:

xen@ubuntu:~$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
/dev/md2        /               ext3    defaults,errors=remount-ro 0       1
/dev/md0        /boot           ext3    defaults        0       2
/dev/md3        /srv            ext3    defaults        0       2
/dev/md1        none            swap    sw              0       0
/dev/hdb        /media/cdrom0   udf,iso9660 user,noauto     0       0
xen@ubuntu:~$

/boot/grub/menu.lst:
title           Ubuntu, kernel 2.6.12-9-386
root            (hd0,0)
kernel          /vmlinuz-2.6.12-9-386 root=/dev/md2 ro quiet splash
initrd          /initrd.img-2.6.12-9-386
savedefault
boot

title Xen 3.0 / XenLinux 2.6.16
root            (hd0,0)
kernel          /xen-3.0.2.gz noreboot dom0_mem=262144
module          /vmlinuz-2.6.16-xen root=/dev/md2 ro console=tty0
module          /initrd.img-2.6.16.xen
savedefault
boot

title           Ubuntu, kernel 2.6.12-9-386 (recovery mode)
root            (hd0,0)
kernel          /vmlinuz-2.6.12-9-386 root=/dev/md2 ro single
initrd          /initrd.img-2.6.12-9-386
boot

title           Ubuntu, memtest86+
root            (hd0,0)
kernel          /memtest86+.bin
boot

and last the boot dir:



Am Dienstag, den 11.04.2006, 08:25 +0200 schrieb Seneca:
Hello Tulasi,

I see a misspeling in my suggestion, once it is

    initrd.img-2.6.16-xen

and once

    initrd.img-2.6.16.xen

It must be exactly the same of cause, otherwise the file will not be
found by grub.


T> mdadm: error opening /devfs/md/1: No such file or directory
T> mdadm: error opening /devfs/md/2: No such file or directory

Now this looks really odd. Could you post your /etc/fstab file,
the current menu.lst and a dir of /boot ?

Seneca



You wrote at Montag, 10. April 2006 23:57:

T> Thanks Seneca


T> still get error:

T> mdadm: error opening /devfs/md/1: No such file or directory
T> mdadm: error opening /devfs/md/2: No such file or directory
T> mount: devfs: not mounted
T> mount: unknown filesystem type "devfs"
T> ivot_root: No such file or directory
T> sbin/init: 428: cannot open dev/console: No such file
T> kernel panic: bla bla bla.....

T> regards

T> Am Sonntag, den 09.04.2006, 23:39 +0200 schrieb Seneca:

T> Hello Tulasi,

T> I think the problem is not the SATA driver, but that you are running
T> on a RAID (md2). As seen in your non-Xen booting, you are using a
T> initrd, so you also need to create and use one for your xen boot.

T> For Xen 3.0.2 it works this way:

T> depmod 2.6.16-xen
T> mkinitrd -o /boot/initrd.img-2.6.16.xen 2.6.16-xen

T> In menu.lst:

T> title           Xen 3.0.2 / XenLinux 2.6.16
T> root            (hd0,0)
T> kernel          /boot/xen-3.0.2.gz dom0_mem=262144
T> module          /boot/vmlinuz-2.6.16-xen root=/dev/md2 ro console=tty0
T> module          /boot/initrd.img-2.6.16-xen
T> savedefault
T> boot

T> Seneca

T>> non of the kernels seems to understand my nVidia Sata controller:

T>> Cannot open root device "md2" or unknown block(0,0)
T>> please append a correct "root=" boot option
T>> kernel panic - not syncing: VFS: Unable to mount root fs on
T>> unknown-block(0,0)

T>> here is my grub conf.

T>> title           Ubuntu, kernel 2.6.12-9-386
T>> root            (hd0,0)
T>> kernel          /vmlinuz-2.6.12-9-386 root=/dev/md2 ro quiet splash
T>> initrd          /initrd.img-2.6.12-9-386
T>> savedefault
T>> boot

T>> title Xen 3.0 / XenLinux 2.6
T>> kernel          /xen-3.0.1.gz noreboot
T>> module          /vmlinuz-2.6.12.6-xen root=/dev/md2 ro console=tty0

T>> title Xen 3.0 / XenLinux 2.6
T>> kernel          /xen-3.0.2.gz noreboot
T>> module          /vmlinuz-2.6.16-xen root=/dev/md2 ro console=tty0

T>> strange Ubuntu 5.10 does recognize the harddrives not so the the
T> latest
T>> Ubuntu Dapper, same with Fedora4 and the latest Fedora5

T>> should i get just two IDE Harddisk?

T>> thanks

T>> Am Sonntag, den 09.04.2006, 15:29 +0200 schrieb Peter Fokkinga:
>>> Quoting Tulasi <kuzum@xxxxxxxxxx>:
>>> > I made a install of XEN but after booting into xen, it reboots
>>> > sometime later, without an information.
>>> >
>>> > does anyone know what to do.
>>> >
>>> Add 'noreboot' (without quotes) to the Xen commandline in your
>>> grub or lilo configuration. Now Xen will just halt when something
>>> goes wrong instead of immediately rebooting, thus allowing you
>>> to see what went wrong. See section 10.3 in the Xen users manual,
>>> http://www.cl.cam.ac.uk/Research/SRG/netos/xen/readmes/user/user.html
>>> 
>>> It's quite possible that the 2.6.12 kernel does not support your
>>> nVidia SATA controller. I would recommend you try Xen 3.0.2 that
>>> was released a few days ago (it uses kernel 2.6.16). It can be
>>> found at http://www.cl.cam.ac.uk/Research/SRG/netos/xen/downloads
>>> 
>>> Cheers, Peter
>>> 
>>> _______________________________________________
>>> Xen-users mailing list
>>> Xen-users@xxxxxxxxxxxxxxxxxxx
>>> http://lists.xensource.com/xen-users


T>> _______________________________________________
T>> Xen-users mailing list
T>> Xen-users@xxxxxxxxxxxxxxxxxxx
T>> http://lists.xensource.com/xen-users


T> _______________________________________________
T> Xen-users mailing list
T> Xen-users@xxxxxxxxxxxxxxxxxxx
T> http://lists.xensource.com/xen-users


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.