[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] dom0 NAT Router



On Sun, 2006-06-25 at 13:13 +0200, hega72@xxxxxx wrote:
> Hi,
> I try to ge the follwoing configuration to work:
> 
> Physikal host with two nics.
> eth0 does dsl via ppp0
> eth1 is LAN Interface with DHCP Sever ( 192.168.1.0/24 )
> The box is acting as a router into the internet for the LAN Clients.
> And I want it to do the same for the domU's
> 
> The Problem is, as soon, as I start up xend - (network-script 'network-bridge 
> netdev=eth1') is in its config - the whole routing does not work anymore; the 
> LAN Clients cannot connect to the Internet anymore - and if I start up a 
> domU, it does not get an IP via dhcp either.
> 
> I thought this configuration not to be that complex, but I don't get it 
> working.
> 
> Anyone done this befor, or a different configuration, that serves the same 
> purpose ?

Tom Eastep has it sorted ;-)

http://www.shorewall.net/XenMyWay.html

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.