|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] DomU WinXP no network connection
I assigned a static ip. Is dynamic ip required for domU WinXP to work? Simon Zhao, Yunfeng wrote: > Did you check if the guest got dynamic ip? > > > Thanks > Yunfeng > > >> -----Original Message----- >> From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx >> [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Simon Gao >> Sent: 2006年7月21日 16:16 >> To: xen-users@xxxxxxxxxxxxxxxxxxx >> Subject: [Xen-users] DomU WinXP no network connection >> >> Hi, >> >> Just installed Windows XP on Gentoo 2006.0 with VT support. WinXP boots >> up ok and virtual network interface is configured, but can't connect to >> anywhere even to dom0. >> >> Here are config file for domU WinXP and some logs. Any help is appreciated. >> >> Simon Gao >> >> =================================== >> kernel = "/usr/lib/xen/boot/hvmloader" >> builder='hvm' >> memory = 512 >> name = "WinXP" >> vif = [ 'type=ioemu, bridge=xenbr0' ] >> disk = [ 'file:/vms/xms/windisk.img,ioemu:hda,w' ] >> on_poweroff = 'destroy' >> on_reboot = 'destroy' >> on_crash = 'destroy' >> device_model = '/usr/lib/xen/bin/qemu-dm' >> #cdrom='/images/winxp/winxp_sp2.iso' >> boot='c' >> sdl=1 >> vnc=0 >> vncviewer=0 >> =================================== >> >> # dmesg >> >> .... >> xenbr0: port 3(vif1.0) entering learning state >> xenbr0: topology change detected, propagating >> xenbr0: port 3(vif1.0) entering forwarding state >> xenbr0: port 3(vif1.0) entering disabled state >> device vif1.0 left promiscuous mode >> xenbr0: port 3(vif1.0) entering disabled state >> device vif2.0 entered promiscuous mode >> xenbr0: port 3(vif2.0) entering learning state >> xenbr0: topology change detected, propagating >> xenbr0: port 3(vif2.0) entering forwarding state >> xenbr0: port 3(vif2.0) entering disabled state >> device vif2.0 left promiscuous mode >> xenbr0: port 3(vif2.0) entering disabled state >> device vif3.0 entered promiscuous mode >> xenbr0: port 3(vif3.0) entering learning state >> xenbr0: topology change detected, propagating >> xenbr0: port 3(vif3.0) entering forwarding state >> xenbr0: port 3(vif3.0) entering learning state >> xenbr0: topology change detected, propagating >> xenbr0: port 3(vif3.0) entering forwarding state >> xenbr0: port 3(vif3.0) entering disabled state >> device vif3.0 left promiscuous mode >> xenbr0: port 3(vif3.0) entering disabled state >> device vif4.0 entered promiscuous mode >> xenbr0: port 3(vif4.0) entering learning state >> xenbr0: topology change detected, propagating >> xenbr0: port 3(vif4.0) entering forwarding state >> xenbr0: port 3(vif4.0) entering learning state >> xenbr0: topology change detected, propagating >> xenbr0: port 3(vif4.0) entering forwarding state >> xenbr0: port 3(vif4.0) entering disabled state >> device vif4.0 left promiscuous mode >> xenbr0: port 3(vif4.0) entering disabled state >> device vif6.0 entered promiscuous mode >> xenbr0: port 3(vif6.0) entering learning state >> xenbr0: topology change detected, propagating >> xenbr0: port 3(vif6.0) entering forwarding state >> >> >> # xm dmesg >> __ __ _____ ___ ____ >> \ \/ /___ _ __ |___ / / _ \ |___ \ >> \ // _ \ '_ \ |_ \| | | | __) | >> / \ __/ | | | ___) | |_| | / __/ >> /_/\_\___|_| |_| |____(_)___(_)_____| >> >> http://www.cl.cam.ac.uk/netos/xen >> University of Cambridge Computer Laboratory >> >> Xen version 3.0.2 (root@xxxxxxxxxx) (gcc version 3.4.5 (Gentoo >> 3.4.5-r1, ssp-3.4.5-1.0, pie-8.7.9)) Sat Apr 22 22:02:54 PDT 2006 >> Latest ChangeSet: Sat Apr 8 12:14:27 2006 +0100 9598:1bce05ff1e52 >> >> (XEN) Physical RAM map: >> (XEN) 0000000000000000 - 000000000009f000 (usable) >> (XEN) 000000000009f000 - 00000000000a0000 (reserved) >> (XEN) 0000000000100000 - 000000007fe91400 (usable) >> (XEN) 000000007fe91400 - 0000000080000000 (reserved) >> (XEN) 00000000e0000000 - 00000000f0007000 (reserved) >> (XEN) 00000000f0008000 - 00000000f000c000 (reserved) >> (XEN) 00000000fec00000 - 00000000fec10000 (reserved) >> (XEN) 00000000fed20000 - 00000000feda0000 (reserved) >> (XEN) 00000000fee00000 - 00000000fee10000 (reserved) >> (XEN) 00000000ffb00000 - 0000000100000000 (reserved) >> (XEN) System RAM: 2046MB (2095296kB) >> (XEN) Xen heap: 10MB (10572kB) >> (XEN) Using scheduler: Simple EDF Scheduler (sedf) >> (XEN) PAE disabled. >> (XEN) DMI 2.4 present. >> (XEN) Using APIC driver default >> (XEN) ACPI: RSDP (v000 DELL ) @ 0x000fc370 >> (XEN) ACPI: RSDT (v001 DELL M07 0x27d60317 ASL 0x00000061) @ >> 0x7fe91a11 >> (XEN) ACPI: FADT (v001 DELL M07 0x27d60317 ASL 0x00000061) @ >> 0x7fe92800 >> (XEN) ACPI: MADT (v001 DELL M07 0x27d60317 ASL 0x00000047) @ >> 0x7fe93000 >> (XEN) ACPI: ASF! (v016 DELL M07 0x27d60317 ASL 0x00000061) @ >> 0x7fe92c00 >> (XEN) ACPI: MCFG (v016 DELL M07 0x27d60317 ASL 0x00000061) @ >> 0x7fe92fc0 >> (XEN) ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @ >> 0x7fe91a8c >> (XEN) ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 INTL 0x20050624) @ >> 0x00000000 >> (XEN) ACPI: Local APIC address 0xfee00000 >> (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) >> (XEN) Processor #0 6:14 APIC version 20 >> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) >> (XEN) Processor #1 6:14 APIC version 20 >> (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) >> (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) >> (XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) >> (XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 >> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >> (XEN) ACPI: IRQ0 used by override. >> (XEN) ACPI: IRQ2 used by override. >> (XEN) ACPI: IRQ9 used by override. >> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs >> (XEN) Using ACPI (MADT) for SMP configuration information >> (XEN) Initializing CPU#0 >> (XEN) Detected 1997.384 MHz processor. >> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K >> (XEN) CPU: L2 cache: 2048K >> (XEN) CPU: Physical Processor ID: 0 >> (XEN) CPU: Processor Core ID: 0 >> (XEN) VMXON is done >> (XEN) Intel machine check architecture supported. >> (XEN) Intel machine check reporting enabled on CPU#0. >> (XEN) CPU0: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz >> stepping 08 >> (XEN) Booting processor 1/1 eip 90000 >> (XEN) Initializing CPU#1 >> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K >> (XEN) CPU: L2 cache: 2048K >> (XEN) CPU: Physical Processor ID: 0 >> (XEN) CPU: Processor Core ID: 1 >> (XEN) VMXON is done >> (XEN) Intel machine check architecture supported. >> (XEN) Intel machine check reporting enabled on CPU#1. >> (XEN) CPU1: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz >> stepping 08 >> (XEN) Total of 2 processors activated. >> (XEN) ENABLING IO-APIC IRQs >> (XEN) ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 >> (XEN) checking TSC synchronization across 2 CPUs: >> (XEN) CPU#0 had 0 usecs TSC skew, fixed it up. >> (XEN) CPU#1 had 1274465 usecs TSC skew, fixed it up. >> (XEN) Platform timer is 1.193MHz PIT >> (XEN) Brought up 2 CPUs >> (XEN) Machine check exception polling timer started. >> (XEN) Using IPI Shortcut mode >> (XEN) *** LOADING DOMAIN 0 *** >> (XEN) Domain 0 kernel supports features = { 0000001f }. >> (XEN) Domain 0 kernel requires features = { 00000000 }. >> (XEN) PHYSICAL MEMORY ARRANGEMENT: >> (XEN) Dom0 alloc.: 7f000000->7f800000 (128983 pages to be allocated) >> (XEN) VIRTUAL MEMORY ARRANGEMENT: >> (XEN) Loaded kernel: c0100000->c044463c >> (XEN) Init. ramdisk: c0445000->c0445000 >> (XEN) Phys-Mach map: c0445000->c04c4f5c >> (XEN) Start info: c04c5000->c04c6000 >> (XEN) Page tables: c04c6000->c04c9000 >> (XEN) Boot stack: c04c9000->c04ca000 >> (XEN) TOTAL: c0000000->c0800000 >> (XEN) ENTRY ADDRESS: c0100000 >> (XEN) Dom0 has maximum 2 VCPUs >> (XEN) Scrubbing Free RAM: .....................done. >> (XEN) Xen trace buffers: disabled >> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch >> input to Xen). >> (XEN) (GUEST: 2) HVM Loader >> (XEN) (GUEST: 2) Loading ROMBIOS ... >> (XEN) (GUEST: 2) Loading Cirrus VGABIOS ... >> (XEN) (GUEST: 2) Loading VMXAssist ... >> (XEN) (GUEST: 2) VMX go ... >> (XEN) (GUEST: 2) VMXAssist (Jun 9 2006) >> (XEN) (GUEST: 2) Memory size 256 MB >> (XEN) (GUEST: 2) E820 map: >> (XEN) (GUEST: 2) 0000000000000000 - 000000000009F800 (RAM) >> (XEN) (GUEST: 2) 000000000009F800 - 00000000000A0000 (Reserved) >> (XEN) (GUEST: 2) 00000000000A0000 - 00000000000C0000 (Type 16) >> (XEN) (GUEST: 2) 00000000000F0000 - 0000000000100000 (Reserved) >> (XEN) (GUEST: 2) 0000000000100000 - 000000000FFFE000 (RAM) >> (XEN) (GUEST: 2) 000000000FFFE000 - 000000000FFFF000 (Type 18) >> (XEN) (GUEST: 2) 000000000FFFF000 - 0000000010000000 (Type 17) >> (XEN) (GUEST: 2) 0000000010000000 - 0000000010003000 (ACPI NVS) >> (XEN) (GUEST: 2) 0000000010003000 - 000000001000D000 (ACPI Data) >> (XEN) (GUEST: 2) 00000000FEC00000 - 0000000100000000 (Type 16) >> (XEN) (GUEST: 2) >> (XEN) (GUEST: 2) Start BIOS ... >> (XEN) (GUEST: 2) Starting emulated 16-bit real-mode: ip=F000:FFF0 >> (XEN) (GUEST: 2) rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $ >> (XEN) HVM_PIT: guest freq in cycles=99869116 >> (XEN) (GUEST: 2) Remapping master: ICW2 0x8 -> 0x20 >> (XEN) (GUEST: 2) Remapping slave: ICW2 0x70 -> 0x28 >> (XEN) (GUEST: 2) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50 >> vruppert Exp $ >> (XEN) (GUEST: 2) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date: >> 2005/05/07 15:55:26 $ >> (XEN) (GUEST: 2) >> (XEN) (GUEST: 2) ata0-0: PCHS=8322/16/63 translation=lba LCHS=522/255/63 >> (XEN) (GUEST: 2) ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (4096 MBytes) >> (XEN) (GUEST: 2) ata0 slave: Unknown device >> (XEN) (GUEST: 2) ata1 master: QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom >> (XEN) (GUEST: 2) ata1 slave: Unknown device >> (XEN) (GUEST: 2) >> (XEN) (GUEST: 2) Booting from CD-Rom... >> (XEN) (GUEST: 2) unsupported PCI BIOS function 0x0E >> (XEN) (GUEST: 2) int13_harddisk: function 15, unmapped device for ELDL=81 >> (XEN) (GUEST: 2) KBD: int09h_handler(): unknown scancode read! >> (XEN) HVM_PIT: guest freq in cycles=20002616 >> (XEN) (GUEST: 3) HVM Loader >> (XEN) (GUEST: 3) Loading ROMBIOS ... >> (XEN) (GUEST: 3) Loading Cirrus VGABIOS ... >> (XEN) (GUEST: 3) Loading VMXAssist ... >> (XEN) (GUEST: 3) VMX go ... >> (XEN) (GUEST: 3) VMXAssist (Jun 9 2006) >> (XEN) (GUEST: 3) Memory size 256 MB >> (XEN) (GUEST: 3) E820 map: >> (XEN) (GUEST: 3) 0000000000000000 - 000000000009F800 (RAM) >> (XEN) (GUEST: 3) 000000000009F800 - 00000000000A0000 (Reserved) >> (XEN) (GUEST: 3) 00000000000A0000 - 00000000000C0000 (Type 16) >> (XEN) (GUEST: 3) 00000000000F0000 - 0000000000100000 (Reserved) >> (XEN) (GUEST: 3) 0000000000100000 - 000000000FFFE000 (RAM) >> (XEN) (GUEST: 3) 000000000FFFE000 - 000000000FFFF000 (Type 18) >> (XEN) (GUEST: 3) 000000000FFFF000 - 0000000010000000 (Type 17) >> (XEN) (GUEST: 3) 0000000010000000 - 0000000010003000 (ACPI NVS) >> (XEN) (GUEST: 3) 0000000010003000 - 000000001000D000 (ACPI Data) >> (XEN) (GUEST: 3) 00000000FEC00000 - 0000000100000000 (Type 16) >> (XEN) (GUEST: 3) >> (XEN) (GUEST: 3) Start BIOS ... >> (XEN) (GUEST: 3) Starting emulated 16-bit real-mode: ip=F000:FFF0 >> (XEN) (GUEST: 3) rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $ >> (XEN) HVM_PIT: guest freq in cycles=99869116 >> (XEN) (GUEST: 3) Remapping master: ICW2 0x8 -> 0x20 >> (XEN) (GUEST: 3) Remapping slave: ICW2 0x70 -> 0x28 >> (XEN) (GUEST: 3) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50 >> vruppert Exp $ >> (XEN) (GUEST: 3) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date: >> 2005/05/07 15:55:26 $ >> (XEN) (GUEST: 3) >> (XEN) (GUEST: 3) ata0-0: PCHS=8322/16/63 translation=lba LCHS=522/255/63 >> (XEN) (GUEST: 3) ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (4096 MBytes) >> (XEN) (GUEST: 3) ata0 slave: Unknown device >> (XEN) (GUEST: 3) ata1 master: QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom >> (XEN) (GUEST: 3) ata1 slave: Unknown device >> (XEN) (GUEST: 3) >> (XEN) (GUEST: 3) Booting from CD-Rom... >> (XEN) (GUEST: 3) unsupported PCI BIOS function 0x0E >> (XEN) (GUEST: 3) int13_harddisk: function 15, unmapped device for ELDL=81 >> (XEN) HVM_PIT: guest freq in cycles=20002616 >> (XEN) HVM_PIT: guest freq in cycles=2003777 >> (XEN) HVM_PIT: guest freq in cycles=20002616 >> (XEN) HVM_PIT: guest freq in cycles=2003777 >> (XEN) HVM_PIT: guest freq in cycles=20002616 >> (XEN) (GUEST: 4) HVM Loader >> (XEN) (GUEST: 4) Loading ROMBIOS ... >> (XEN) (GUEST: 4) Loading Cirrus VGABIOS ... >> (XEN) (GUEST: 4) Loading VMXAssist ... >> (XEN) (GUEST: 4) VMX go ... >> (XEN) (GUEST: 4) VMXAssist (Jun 9 2006) >> (XEN) (GUEST: 4) Memory size 256 MB >> (XEN) (GUEST: 4) E820 map: >> (XEN) (GUEST: 4) 0000000000000000 - 000000000009F800 (RAM) >> (XEN) (GUEST: 4) 000000000009F800 - 00000000000A0000 (Reserved) >> (XEN) (GUEST: 4) 00000000000A0000 - 00000000000C0000 (Type 16) >> (XEN) (GUEST: 4) 00000000000F0000 - 0000000000100000 (Reserved) >> (XEN) (GUEST: 4) 0000000000100000 - 000000000FFFE000 (RAM) >> (XEN) (GUEST: 4) 000000000FFFE000 - 000000000FFFF000 (Type 18) >> (XEN) (GUEST: 4) 000000000FFFF000 - 0000000010000000 (Type 17) >> (XEN) (GUEST: 4) 0000000010000000 - 0000000010003000 (ACPI NVS) >> (XEN) (GUEST: 4) 0000000010003000 - 000000001000D000 (ACPI Data) >> (XEN) (GUEST: 4) 00000000FEC00000 - 0000000100000000 (Type 16) >> (XEN) (GUEST: 4) >> (XEN) (GUEST: 4) Start BIOS ... >> (XEN) (GUEST: 4) Starting emulated 16-bit real-mode: ip=F000:FFF0 >> (XEN) (GUEST: 4) rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $ >> (XEN) HVM_PIT: guest freq in cycles=99869116 >> (XEN) (GUEST: 4) Remapping master: ICW2 0x8 -> 0x20 >> (XEN) (GUEST: 4) Remapping slave: ICW2 0x70 -> 0x28 >> (XEN) (GUEST: 4) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50 >> vruppert Exp $ >> (XEN) (GUEST: 4) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date: >> 2005/05/07 15:55:26 $ >> (XEN) (GUEST: 4) >> (XEN) (GUEST: 4) ata0-0: PCHS=8322/16/63 translation=lba LCHS=522/255/63 >> (XEN) (GUEST: 4) ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (4096 MBytes) >> (XEN) (GUEST: 4) ata0 slave: Unknown device >> (XEN) (GUEST: 4) ata1 master: QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom >> (XEN) (GUEST: 4) ata1 slave: Unknown device >> (XEN) (GUEST: 4) >> (XEN) (GUEST: 4) Booting from CD-Rom... >> (XEN) (GUEST: 4) unsupported PCI BIOS function 0x0E >> (XEN) (GUEST: 4) int13_harddisk: function 15, unmapped device for ELDL=81 >> (XEN) HVM_PIT: guest freq in cycles=20002616 >> (XEN) HVM_PIT: guest freq in cycles=2003777 >> (XEN) HVM_PIT: guest freq in cycles=20002616 >> (XEN) (GUEST: 6) HVM Loader >> (XEN) (GUEST: 6) Loading ROMBIOS ... >> (XEN) (GUEST: 6) Loading Cirrus VGABIOS ... >> (XEN) (GUEST: 6) Loading VMXAssist ... >> (XEN) (GUEST: 6) VMX go ... >> (XEN) (GUEST: 6) VMXAssist (Jun 9 2006) >> (XEN) (GUEST: 6) Memory size 512 MB >> (XEN) (GUEST: 6) E820 map: >> (XEN) (GUEST: 6) 0000000000000000 - 000000000009F800 (RAM) >> (XEN) (GUEST: 6) 000000000009F800 - 00000000000A0000 (Reserved) >> (XEN) (GUEST: 6) 00000000000A0000 - 00000000000C0000 (Type 16) >> (XEN) (GUEST: 6) 00000000000F0000 - 0000000000100000 (Reserved) >> (XEN) (GUEST: 6) 0000000000100000 - 000000001FFFE000 (RAM) >> (XEN) (GUEST: 6) 000000001FFFE000 - 000000001FFFF000 (Type 18) >> (XEN) (GUEST: 6) 000000001FFFF000 - 0000000020000000 (Type 17) >> (XEN) (GUEST: 6) 0000000020000000 - 0000000020003000 (ACPI NVS) >> (XEN) (GUEST: 6) 0000000020003000 - 000000002000D000 (ACPI Data) >> (XEN) (GUEST: 6) 00000000FEC00000 - 0000000100000000 (Type 16) >> (XEN) (GUEST: 6) >> (XEN) (GUEST: 6) Start BIOS ... >> (XEN) (GUEST: 6) Starting emulated 16-bit real-mode: ip=F000:FFF0 >> (XEN) (GUEST: 6) rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $ >> (XEN) HVM_PIT: guest freq in cycles=99869116 >> (XEN) (GUEST: 6) Remapping master: ICW2 0x8 -> 0x20 >> (XEN) (GUEST: 6) Remapping slave: ICW2 0x70 -> 0x28 >> (XEN) (GUEST: 6) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50 >> vruppert Exp $ >> (XEN) (GUEST: 6) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date: >> 2005/05/07 15:55:26 $ >> (XEN) (GUEST: 6) >> (XEN) (GUEST: 6) ata0-0: PCHS=8322/16/63 translation=lba LCHS=522/255/63 >> (XEN) (GUEST: 6) ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (4096 MBytes) >> (XEN) (GUEST: 6) ata0 slave: Unknown device >> (XEN) (GUEST: 6) ata1 master: QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom >> (XEN) (GUEST: 6) ata1 slave: Unknown device >> (XEN) (GUEST: 6) >> (XEN) (GUEST: 6) Booting from Hard Disk... >> (XEN) (GUEST: 6) unsupported PCI BIOS function 0x0E >> (XEN) (GUEST: 6) int13_harddisk: function 15, unmapped device for ELDL=81 >> (XEN) HVM_PIT: guest freq in cycles=20002616 >> >> >> >> >> _______________________________________________ >> Xen-users mailing list >> Xen-users@xxxxxxxxxxxxxxxxxxx >> http://lists.xensource.com/xen-users >> _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |