[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] DomU WinXP no network connection



Well, somewhere on this mailing-list is a post with a hint to load the
"tun" module first before starting the domU. Did you try this?

Greets,
Tiziano

(Simon: sorry for the private post, hit the wrong button :-)


Simon Gao wrote:
> I assigned a static ip. Is dynamic ip required for domU WinXP to work?
>
> Simon
>
>
> Zhao, Yunfeng wrote:
>   
>> Did you check if the guest got dynamic ip?
>>
>>
>> Thanks
>> Yunfeng
>>
>>   
>>     
>>> -----Original Message-----
>>> From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
>>> [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Simon Gao
>>> Sent: 2006年7月21日 16:16
>>> To: xen-users@xxxxxxxxxxxxxxxxxxx
>>> Subject: [Xen-users] DomU WinXP no network connection
>>>
>>> Hi,
>>>
>>> Just installed Windows XP on Gentoo 2006.0 with VT support. WinXP boots
>>> up ok and virtual network interface is configured, but can't connect to
>>> anywhere even to dom0.
>>>
>>> Here are config file for domU WinXP and some logs. Any help is appreciated.
>>>
>>> Simon Gao
>>>
>>> ===================================
>>> kernel = "/usr/lib/xen/boot/hvmloader"
>>> builder='hvm'
>>> memory = 512
>>> name = "WinXP"
>>> vif = [ 'type=ioemu, bridge=xenbr0' ]
>>> disk = [ 'file:/vms/xms/windisk.img,ioemu:hda,w' ]
>>> on_poweroff = 'destroy'
>>> on_reboot   = 'destroy'
>>> on_crash    = 'destroy'
>>> device_model = '/usr/lib/xen/bin/qemu-dm'
>>> #cdrom='/images/winxp/winxp_sp2.iso'
>>> boot='c'
>>> sdl=1
>>> vnc=0
>>> vncviewer=0
>>> ===================================
>>>
>>> # dmesg
>>>
>>> ....
>>> xenbr0: port 3(vif1.0) entering learning state
>>> xenbr0: topology change detected, propagating
>>> xenbr0: port 3(vif1.0) entering forwarding state
>>> xenbr0: port 3(vif1.0) entering disabled state
>>> device vif1.0 left promiscuous mode
>>> xenbr0: port 3(vif1.0) entering disabled state
>>> device vif2.0 entered promiscuous mode
>>> xenbr0: port 3(vif2.0) entering learning state
>>> xenbr0: topology change detected, propagating
>>> xenbr0: port 3(vif2.0) entering forwarding state
>>> xenbr0: port 3(vif2.0) entering disabled state
>>> device vif2.0 left promiscuous mode
>>> xenbr0: port 3(vif2.0) entering disabled state
>>> device vif3.0 entered promiscuous mode
>>> xenbr0: port 3(vif3.0) entering learning state
>>> xenbr0: topology change detected, propagating
>>> xenbr0: port 3(vif3.0) entering forwarding state
>>> xenbr0: port 3(vif3.0) entering learning state
>>> xenbr0: topology change detected, propagating
>>> xenbr0: port 3(vif3.0) entering forwarding state
>>> xenbr0: port 3(vif3.0) entering disabled state
>>> device vif3.0 left promiscuous mode
>>> xenbr0: port 3(vif3.0) entering disabled state
>>> device vif4.0 entered promiscuous mode
>>> xenbr0: port 3(vif4.0) entering learning state
>>> xenbr0: topology change detected, propagating
>>> xenbr0: port 3(vif4.0) entering forwarding state
>>> xenbr0: port 3(vif4.0) entering learning state
>>> xenbr0: topology change detected, propagating
>>> xenbr0: port 3(vif4.0) entering forwarding state
>>> xenbr0: port 3(vif4.0) entering disabled state
>>> device vif4.0 left promiscuous mode
>>> xenbr0: port 3(vif4.0) entering disabled state
>>> device vif6.0 entered promiscuous mode
>>> xenbr0: port 3(vif6.0) entering learning state
>>> xenbr0: topology change detected, propagating
>>> xenbr0: port 3(vif6.0) entering forwarding state
>>>
>>>
>>> # xm dmesg
>>> __  __            _____  ___   ____
>>> \ \/ /___ _ __   |___ / / _ \ |___ \
>>>  \  // _ \ '_ \    |_ \| | | |  __) |
>>>  /  \  __/ | | |  ___) | |_| | / __/
>>> /_/\_\___|_| |_| |____(_)___(_)_____|
>>>
>>> http://www.cl.cam.ac.uk/netos/xen
>>> University of Cambridge Computer Laboratory
>>>
>>> Xen version 3.0.2 (root@xxxxxxxxxx) (gcc version 3.4.5 (Gentoo
>>> 3.4.5-r1, ssp-3.4.5-1.0, pie-8.7.9)) Sat Apr 22 22:02:54 PDT 2006
>>> Latest ChangeSet: Sat Apr  8 12:14:27 2006 +0100 9598:1bce05ff1e52
>>>
>>> (XEN) Physical RAM map:
>>> (XEN)  0000000000000000 - 000000000009f000 (usable)
>>> (XEN)  000000000009f000 - 00000000000a0000 (reserved)
>>> (XEN)  0000000000100000 - 000000007fe91400 (usable)
>>> (XEN)  000000007fe91400 - 0000000080000000 (reserved)
>>> (XEN)  00000000e0000000 - 00000000f0007000 (reserved)
>>> (XEN)  00000000f0008000 - 00000000f000c000 (reserved)
>>> (XEN)  00000000fec00000 - 00000000fec10000 (reserved)
>>> (XEN)  00000000fed20000 - 00000000feda0000 (reserved)
>>> (XEN)  00000000fee00000 - 00000000fee10000 (reserved)
>>> (XEN)  00000000ffb00000 - 0000000100000000 (reserved)
>>> (XEN) System RAM: 2046MB (2095296kB)
>>> (XEN) Xen heap: 10MB (10572kB)
>>> (XEN) Using scheduler: Simple EDF Scheduler (sedf)
>>> (XEN) PAE disabled.
>>> (XEN) DMI 2.4 present.
>>> (XEN) Using APIC driver default
>>> (XEN) ACPI: RSDP (v000 DELL                                  ) @ 0x000fc370
>>> (XEN) ACPI: RSDT (v001 DELL    M07     0x27d60317 ASL  0x00000061) @
>>> 0x7fe91a11
>>> (XEN) ACPI: FADT (v001 DELL    M07     0x27d60317 ASL  0x00000061) @
>>> 0x7fe92800
>>> (XEN) ACPI: MADT (v001 DELL    M07     0x27d60317 ASL  0x00000047) @
>>> 0x7fe93000
>>> (XEN) ACPI: ASF! (v016 DELL    M07     0x27d60317 ASL  0x00000061) @
>>> 0x7fe92c00
>>> (XEN) ACPI: MCFG (v016 DELL    M07     0x27d60317 ASL  0x00000061) @
>>> 0x7fe92fc0
>>> (XEN) ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20050624) @
>>> 0x7fe91a8c
>>> (XEN) ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 INTL 0x20050624) @
>>> 0x00000000
>>> (XEN) ACPI: Local APIC address 0xfee00000
>>> (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>>> (XEN) Processor #0 6:14 APIC version 20
>>> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>>> (XEN) Processor #1 6:14 APIC version 20
>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>>> (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>>> (XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>>> (XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>>> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>>> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>>> (XEN) ACPI: IRQ0 used by override.
>>> (XEN) ACPI: IRQ2 used by override.
>>> (XEN) ACPI: IRQ9 used by override.
>>> (XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
>>> (XEN) Using ACPI (MADT) for SMP configuration information
>>> (XEN) Initializing CPU#0
>>> (XEN) Detected 1997.384 MHz processor.
>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>> (XEN) CPU: L2 cache: 2048K
>>> (XEN) CPU: Physical Processor ID: 0
>>> (XEN) CPU: Processor Core ID: 0
>>> (XEN) VMXON is done
>>> (XEN) Intel machine check architecture supported.
>>> (XEN) Intel machine check reporting enabled on CPU#0.
>>> (XEN) CPU0: Intel Genuine Intel(R) CPU           T2500  @ 2.00GHz
>>> stepping 08
>>> (XEN) Booting processor 1/1 eip 90000
>>> (XEN) Initializing CPU#1
>>> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>>> (XEN) CPU: L2 cache: 2048K
>>> (XEN) CPU: Physical Processor ID: 0
>>> (XEN) CPU: Processor Core ID: 1
>>> (XEN) VMXON is done
>>> (XEN) Intel machine check architecture supported.
>>> (XEN) Intel machine check reporting enabled on CPU#1.
>>> (XEN) CPU1: Intel Genuine Intel(R) CPU           T2500  @ 2.00GHz
>>> stepping 08
>>> (XEN) Total of 2 processors activated.
>>> (XEN) ENABLING IO-APIC IRQs
>>> (XEN) ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>>> (XEN) checking TSC synchronization across 2 CPUs:
>>> (XEN) CPU#0 had 0 usecs TSC skew, fixed it up.
>>> (XEN) CPU#1 had 1274465 usecs TSC skew, fixed it up.
>>> (XEN) Platform timer is 1.193MHz PIT
>>> (XEN) Brought up 2 CPUs
>>> (XEN) Machine check exception polling timer started.
>>> (XEN) Using IPI Shortcut mode
>>> (XEN) *** LOADING DOMAIN 0 ***
>>> (XEN) Domain 0 kernel supports features = { 0000001f }.
>>> (XEN) Domain 0 kernel requires features = { 00000000 }.
>>> (XEN) PHYSICAL MEMORY ARRANGEMENT:
>>> (XEN)  Dom0 alloc.:   7f000000->7f800000 (128983 pages to be allocated)
>>> (XEN) VIRTUAL MEMORY ARRANGEMENT:
>>> (XEN)  Loaded kernel: c0100000->c044463c
>>> (XEN)  Init. ramdisk: c0445000->c0445000
>>> (XEN)  Phys-Mach map: c0445000->c04c4f5c
>>> (XEN)  Start info:    c04c5000->c04c6000
>>> (XEN)  Page tables:   c04c6000->c04c9000
>>> (XEN)  Boot stack:    c04c9000->c04ca000
>>> (XEN)  TOTAL:         c0000000->c0800000
>>> (XEN)  ENTRY ADDRESS: c0100000
>>> (XEN) Dom0 has maximum 2 VCPUs
>>> (XEN) Scrubbing Free RAM: .....................done.
>>> (XEN) Xen trace buffers: disabled
>>> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
>>> input to Xen).
>>> (XEN) (GUEST: 2) HVM Loader
>>> (XEN) (GUEST: 2) Loading ROMBIOS ...
>>> (XEN) (GUEST: 2) Loading Cirrus VGABIOS ...
>>> (XEN) (GUEST: 2) Loading VMXAssist ...
>>> (XEN) (GUEST: 2) VMX go ...
>>> (XEN) (GUEST: 2) VMXAssist (Jun  9 2006)
>>> (XEN) (GUEST: 2) Memory size 256 MB
>>> (XEN) (GUEST: 2) E820 map:
>>> (XEN) (GUEST: 2) 0000000000000000 - 000000000009F800 (RAM)
>>> (XEN) (GUEST: 2) 000000000009F800 - 00000000000A0000 (Reserved)
>>> (XEN) (GUEST: 2) 00000000000A0000 - 00000000000C0000 (Type 16)
>>> (XEN) (GUEST: 2) 00000000000F0000 - 0000000000100000 (Reserved)
>>> (XEN) (GUEST: 2) 0000000000100000 - 000000000FFFE000 (RAM)
>>> (XEN) (GUEST: 2) 000000000FFFE000 - 000000000FFFF000 (Type 18)
>>> (XEN) (GUEST: 2) 000000000FFFF000 - 0000000010000000 (Type 17)
>>> (XEN) (GUEST: 2) 0000000010000000 - 0000000010003000 (ACPI NVS)
>>> (XEN) (GUEST: 2) 0000000010003000 - 000000001000D000 (ACPI Data)
>>> (XEN) (GUEST: 2) 00000000FEC00000 - 0000000100000000 (Type 16)
>>> (XEN) (GUEST: 2)
>>> (XEN) (GUEST: 2) Start BIOS ...
>>> (XEN) (GUEST: 2) Starting emulated 16-bit real-mode: ip=F000:FFF0
>>> (XEN) (GUEST: 2)  rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $
>>> (XEN) HVM_PIT: guest freq in cycles=99869116
>>> (XEN) (GUEST: 2) Remapping master: ICW2 0x8 -> 0x20
>>> (XEN) (GUEST: 2) Remapping slave: ICW2 0x70 -> 0x28
>>> (XEN) (GUEST: 2) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50
>>> vruppert Exp $
>>> (XEN) (GUEST: 2) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date:
>>> 2005/05/07 15:55:26 $
>>> (XEN) (GUEST: 2)
>>> (XEN) (GUEST: 2) ata0-0: PCHS=8322/16/63 translation=lba LCHS=522/255/63
>>> (XEN) (GUEST: 2) ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (4096 MBytes)
>>> (XEN) (GUEST: 2) ata0  slave: Unknown device
>>> (XEN) (GUEST: 2) ata1 master: QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom
>>> (XEN) (GUEST: 2) ata1  slave: Unknown device
>>> (XEN) (GUEST: 2)
>>> (XEN) (GUEST: 2) Booting from CD-Rom...
>>> (XEN) (GUEST: 2) unsupported PCI BIOS function 0x0E
>>> (XEN) (GUEST: 2) int13_harddisk: function 15, unmapped device for ELDL=81
>>> (XEN) (GUEST: 2) KBD: int09h_handler(): unknown scancode read!
>>> (XEN) HVM_PIT: guest freq in cycles=20002616
>>> (XEN) (GUEST: 3) HVM Loader
>>> (XEN) (GUEST: 3) Loading ROMBIOS ...
>>> (XEN) (GUEST: 3) Loading Cirrus VGABIOS ...
>>> (XEN) (GUEST: 3) Loading VMXAssist ...
>>> (XEN) (GUEST: 3) VMX go ...
>>> (XEN) (GUEST: 3) VMXAssist (Jun  9 2006)
>>> (XEN) (GUEST: 3) Memory size 256 MB
>>> (XEN) (GUEST: 3) E820 map:
>>> (XEN) (GUEST: 3) 0000000000000000 - 000000000009F800 (RAM)
>>> (XEN) (GUEST: 3) 000000000009F800 - 00000000000A0000 (Reserved)
>>> (XEN) (GUEST: 3) 00000000000A0000 - 00000000000C0000 (Type 16)
>>> (XEN) (GUEST: 3) 00000000000F0000 - 0000000000100000 (Reserved)
>>> (XEN) (GUEST: 3) 0000000000100000 - 000000000FFFE000 (RAM)
>>> (XEN) (GUEST: 3) 000000000FFFE000 - 000000000FFFF000 (Type 18)
>>> (XEN) (GUEST: 3) 000000000FFFF000 - 0000000010000000 (Type 17)
>>> (XEN) (GUEST: 3) 0000000010000000 - 0000000010003000 (ACPI NVS)
>>> (XEN) (GUEST: 3) 0000000010003000 - 000000001000D000 (ACPI Data)
>>> (XEN) (GUEST: 3) 00000000FEC00000 - 0000000100000000 (Type 16)
>>> (XEN) (GUEST: 3)
>>> (XEN) (GUEST: 3) Start BIOS ...
>>> (XEN) (GUEST: 3) Starting emulated 16-bit real-mode: ip=F000:FFF0
>>> (XEN) (GUEST: 3)  rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $
>>> (XEN) HVM_PIT: guest freq in cycles=99869116
>>> (XEN) (GUEST: 3) Remapping master: ICW2 0x8 -> 0x20
>>> (XEN) (GUEST: 3) Remapping slave: ICW2 0x70 -> 0x28
>>> (XEN) (GUEST: 3) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50
>>> vruppert Exp $
>>> (XEN) (GUEST: 3) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date:
>>> 2005/05/07 15:55:26 $
>>> (XEN) (GUEST: 3)
>>> (XEN) (GUEST: 3) ata0-0: PCHS=8322/16/63 translation=lba LCHS=522/255/63
>>> (XEN) (GUEST: 3) ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (4096 MBytes)
>>> (XEN) (GUEST: 3) ata0  slave: Unknown device
>>> (XEN) (GUEST: 3) ata1 master: QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom
>>> (XEN) (GUEST: 3) ata1  slave: Unknown device
>>> (XEN) (GUEST: 3)
>>> (XEN) (GUEST: 3) Booting from CD-Rom...
>>> (XEN) (GUEST: 3) unsupported PCI BIOS function 0x0E
>>> (XEN) (GUEST: 3) int13_harddisk: function 15, unmapped device for ELDL=81
>>> (XEN) HVM_PIT: guest freq in cycles=20002616
>>> (XEN) HVM_PIT: guest freq in cycles=2003777
>>> (XEN) HVM_PIT: guest freq in cycles=20002616
>>> (XEN) HVM_PIT: guest freq in cycles=2003777
>>> (XEN) HVM_PIT: guest freq in cycles=20002616
>>> (XEN) (GUEST: 4) HVM Loader
>>> (XEN) (GUEST: 4) Loading ROMBIOS ...
>>> (XEN) (GUEST: 4) Loading Cirrus VGABIOS ...
>>> (XEN) (GUEST: 4) Loading VMXAssist ...
>>> (XEN) (GUEST: 4) VMX go ...
>>> (XEN) (GUEST: 4) VMXAssist (Jun  9 2006)
>>> (XEN) (GUEST: 4) Memory size 256 MB
>>> (XEN) (GUEST: 4) E820 map:
>>> (XEN) (GUEST: 4) 0000000000000000 - 000000000009F800 (RAM)
>>> (XEN) (GUEST: 4) 000000000009F800 - 00000000000A0000 (Reserved)
>>> (XEN) (GUEST: 4) 00000000000A0000 - 00000000000C0000 (Type 16)
>>> (XEN) (GUEST: 4) 00000000000F0000 - 0000000000100000 (Reserved)
>>> (XEN) (GUEST: 4) 0000000000100000 - 000000000FFFE000 (RAM)
>>> (XEN) (GUEST: 4) 000000000FFFE000 - 000000000FFFF000 (Type 18)
>>> (XEN) (GUEST: 4) 000000000FFFF000 - 0000000010000000 (Type 17)
>>> (XEN) (GUEST: 4) 0000000010000000 - 0000000010003000 (ACPI NVS)
>>> (XEN) (GUEST: 4) 0000000010003000 - 000000001000D000 (ACPI Data)
>>> (XEN) (GUEST: 4) 00000000FEC00000 - 0000000100000000 (Type 16)
>>> (XEN) (GUEST: 4)
>>> (XEN) (GUEST: 4) Start BIOS ...
>>> (XEN) (GUEST: 4) Starting emulated 16-bit real-mode: ip=F000:FFF0
>>> (XEN) (GUEST: 4)  rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $
>>> (XEN) HVM_PIT: guest freq in cycles=99869116
>>> (XEN) (GUEST: 4) Remapping master: ICW2 0x8 -> 0x20
>>> (XEN) (GUEST: 4) Remapping slave: ICW2 0x70 -> 0x28
>>> (XEN) (GUEST: 4) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50
>>> vruppert Exp $
>>> (XEN) (GUEST: 4) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date:
>>> 2005/05/07 15:55:26 $
>>> (XEN) (GUEST: 4)
>>> (XEN) (GUEST: 4) ata0-0: PCHS=8322/16/63 translation=lba LCHS=522/255/63
>>> (XEN) (GUEST: 4) ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (4096 MBytes)
>>> (XEN) (GUEST: 4) ata0  slave: Unknown device
>>> (XEN) (GUEST: 4) ata1 master: QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom
>>> (XEN) (GUEST: 4) ata1  slave: Unknown device
>>> (XEN) (GUEST: 4)
>>> (XEN) (GUEST: 4) Booting from CD-Rom...
>>> (XEN) (GUEST: 4) unsupported PCI BIOS function 0x0E
>>> (XEN) (GUEST: 4) int13_harddisk: function 15, unmapped device for ELDL=81
>>> (XEN) HVM_PIT: guest freq in cycles=20002616
>>> (XEN) HVM_PIT: guest freq in cycles=2003777
>>> (XEN) HVM_PIT: guest freq in cycles=20002616
>>> (XEN) (GUEST: 6) HVM Loader
>>> (XEN) (GUEST: 6) Loading ROMBIOS ...
>>> (XEN) (GUEST: 6) Loading Cirrus VGABIOS ...
>>> (XEN) (GUEST: 6) Loading VMXAssist ...
>>> (XEN) (GUEST: 6) VMX go ...
>>> (XEN) (GUEST: 6) VMXAssist (Jun  9 2006)
>>> (XEN) (GUEST: 6) Memory size 512 MB
>>> (XEN) (GUEST: 6) E820 map:
>>> (XEN) (GUEST: 6) 0000000000000000 - 000000000009F800 (RAM)
>>> (XEN) (GUEST: 6) 000000000009F800 - 00000000000A0000 (Reserved)
>>> (XEN) (GUEST: 6) 00000000000A0000 - 00000000000C0000 (Type 16)
>>> (XEN) (GUEST: 6) 00000000000F0000 - 0000000000100000 (Reserved)
>>> (XEN) (GUEST: 6) 0000000000100000 - 000000001FFFE000 (RAM)
>>> (XEN) (GUEST: 6) 000000001FFFE000 - 000000001FFFF000 (Type 18)
>>> (XEN) (GUEST: 6) 000000001FFFF000 - 0000000020000000 (Type 17)
>>> (XEN) (GUEST: 6) 0000000020000000 - 0000000020003000 (ACPI NVS)
>>> (XEN) (GUEST: 6) 0000000020003000 - 000000002000D000 (ACPI Data)
>>> (XEN) (GUEST: 6) 00000000FEC00000 - 0000000100000000 (Type 16)
>>> (XEN) (GUEST: 6)
>>> (XEN) (GUEST: 6) Start BIOS ...
>>> (XEN) (GUEST: 6) Starting emulated 16-bit real-mode: ip=F000:FFF0
>>> (XEN) (GUEST: 6)  rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $
>>> (XEN) HVM_PIT: guest freq in cycles=99869116
>>> (XEN) (GUEST: 6) Remapping master: ICW2 0x8 -> 0x20
>>> (XEN) (GUEST: 6) Remapping slave: ICW2 0x70 -> 0x28
>>> (XEN) (GUEST: 6) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50
>>> vruppert Exp $
>>> (XEN) (GUEST: 6) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date:
>>> 2005/05/07 15:55:26 $
>>> (XEN) (GUEST: 6)
>>> (XEN) (GUEST: 6) ata0-0: PCHS=8322/16/63 translation=lba LCHS=522/255/63
>>> (XEN) (GUEST: 6) ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (4096 MBytes)
>>> (XEN) (GUEST: 6) ata0  slave: Unknown device
>>> (XEN) (GUEST: 6) ata1 master: QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom
>>> (XEN) (GUEST: 6) ata1  slave: Unknown device
>>> (XEN) (GUEST: 6)
>>> (XEN) (GUEST: 6) Booting from Hard Disk...
>>> (XEN) (GUEST: 6) unsupported PCI BIOS function 0x0E
>>> (XEN) (GUEST: 6) int13_harddisk: function 15, unmapped device for ELDL=81
>>> (XEN) HVM_PIT: guest freq in cycles=20002616
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Xen-users mailing list
>>> Xen-users@xxxxxxxxxxxxxxxxxxx
>>> http://lists.xensource.com/xen-users
>>>     
>>>       
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>   


-- 
Tiziano Müller
Software Development & IT

Neuronics AG
Technoparkstrasse 1
8005 Zuerich / Switzerland

Tel (direct): +41 44 445 15 31
Tel +41 44 445 16 40
Fax +41 44 445 16 44
www.neuronics.ch
--



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.