[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] Smallest Memory requirements for Dom0



If you are sparse on dom-0, and don't have too many bridges or
firewall / NAT rules going on it should be fine. More than 3 or 4
bridges and you may see some issues at that size.

I did the same with a xen 2 / open ssi lab cluster and it worked very
well.

Steer clear of iscsi if you're only giving dom-0 64 MB, if you plan on
doing any distributed / network block devices. 

HTH
-Tim

On Thu, 2006-10-05 at 12:33 -0400, Shepherd, Darren S wrote:
> All,
> 
> Has anybody tried to get Dom0 memory footprint as small as possible.  I was 
> thinking of building a cluster of PC's (I have 20 or so P4 2.4Ghz 1GB RAM 
> machines sitting around) that would be dedicated to Xen.  I typically run 
> each DomU with 1GB memory.  I was hoping I could get Dom0 down to maybe 64Mb? 
>  Has anybody tried this.  Would there be any performance impact?  I plan on 
> doing absolutely nothing in Dom0, solely run Xen.
> 
> Darren
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
> 
> 


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.