Re: [Xen-users] 3.0.2 seems not to create bridge

[Bjoern Metzdorf <bm@xxxxxxxxxxxxxxxxxxxxxxx>]

Harm Weites wrote:
> hm, the iproute package is installed so i have the IP tools. Looking at 
> the README.debian tells me networking isnt done automatically just like 
> you said (the file was in a different dir though)
> How do i create the bridge by hand ? Since there is no peth0... I can 
> create it with "brctl addbr xenbr0", but then "brctl show" only lists a 
> bridge with no interfaces. (after /etc/init.d/xend restart)
> relevant config parts:
> (xend-config.sxp)
> [...]
> (network-script network-bridge)
> (vif-script vif-bridge)
> [...]
Change network-script back to network-dummy and add this to your 
/etc/network/interfaces:
---------------------------------
auto eth0
iface eth0 inet manual

auto xenbr0
iface xenbr0 inet static
        bridge-ports eth0
        address 10.0.0.2
        netmask 255.255.255.0
        gateway 10.0.0.1
---------------------------------

The standard vif-script will use the bridge xenbr0 to add virtual 
interfaces.
Make sure package bridge-utils is installed and reboot or restart 
networking.
Regards,
Bjoern

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users