[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] Unable to deploy a VM on xen 3.0.3


  • To: xen-users@xxxxxxxxxxxxxxxxxxx
  • From: "Omer Khalid" <Omer.Khalid@xxxxxxx>
  • Date: Thu, 14 Dec 2006 17:36:44 +0100
  • Delivery-date: Thu, 14 Dec 2006 08:36:53 -0800
  • Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:sender:to:subject:in-reply-to:mime-version:content-type:references:x-google-sender-auth; b=TwBezB/Y2djW9a2bpO0gLEM0E1SME3CUw+JCEUI5DnbdyxFKWyrlCIFPV3VbxSxm33lN2S0VfxqJwP2eg1tpIoYqsZjyNKQbBShm2+U1M2EHDz7ccCvArU8YA2LrP0e1kmrPSl8pOeFhWXqZT4+jjtcl4Rna5wYaz2cO/utVBmc=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

First of all thanks of all of you for your help and advices, especially to mention Zhang Binbin and Mats Peterssons.

Status: Still not working!

Whats tried so far:
* selinux disabled for both dom0 and domU
* added "root='/dev/sda1 ro'" to xen config file. Also tried with xvd1 and hd1 in place of sd1.
* created initrd for domU

To recap, here is my

=== xen config file ===
name = "slc4xern"
hostname="M-Ctb-Generic-5"
kernel="/boot/vmlinuz-2.6.18-1.2835.slc4xen"
ramdisk="/boot/initrd-2.6.16-xen.img"
memory = 512
#vcpus = 2
disk = ['phy:vg1/slc4xernroot,sda1,w','phy:vg1/slc4xernswap,sda2,w' ]
root= "/dev/sda1 ro"
vif = [ '' ]
ip= "128.xxx.xxx.xxx"
gateway="128.xxx.1.1"
#bootloader="/usr/bin/pygrub"
on_reboot   = 'restart'
on_crash    = 'restart'


=== end of config file ===

When I try to start the domain by "xm create slc4xern -c", the output is the following:

=== domU console output ===
Using config file "/etc/xen/slc4xern".
Started domain SLC4Xern
Linux version 2.6.18-1.2835.slc4xen (root@lxcert-i386) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP WedNov 29 21:05:58 CET 2006
BIOS-provided physical RAM map:
 Xen: 0000000000000000 - 0000000020800000 (usable)
0MB HIGHMEM available.
520MB LOWMEM available.
Using x86 segment limits to approximate NX protection
ACPI in unprivileged domain disabled
Built 1 zonelists.  Total pages: 133120
Kernel command line:  ip= 128.142.200.218:1.2.3.4:128.142.1.1::M-Ctb-Generic-5:eth0:off root=/dev/sda1 ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07d4000 soft=c07b4000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Xen reported: 2790.700 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB disabled
vmalloc area: e1000000-f4ffe000, maxmem 2d7fe000
Memory: 511232k/532480k available (2071k kernel code, 12640k reserved, 877k data, 184k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6982.20 BogoMIPS (lpj=13964410)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Brought up 1 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 1507k freed
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IA-32 Microcode Update Driver: v1.14-xen <tigran@xxxxxxxxxxx>
audit: initializing netlink socket (disabled)
audit(1166113570.914:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key EE5FD53744D1DF1C
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Linux version 2.6.18-1.2835.slc4xen (root@lxcert-i386) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP WedNov 29 21:05:58 CET 2006
BIOS-provided physical RAM map:
 Xen: 0000000000000000 - 0000000020800000 (usable)
0MB HIGHMEM available.
520MB LOWMEM available.
Using x86 segment limits to approximate NX protection
ACPI in unprivileged domain disabled
Built 1 zonelists.  Total pages: 133120
Kernel command line:  ip= 128.xxx.xxx.xxx:1.2.3.4:128.xxx.1.1::M-Ctb-Generic-5:eth0:off root=/dev/sda1 ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07d4000 soft=c07b4000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Xen reported: 2790.700 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB disabled
vmalloc area: e1000000-f4ffe000, maxmem 2d7fe000
Memory: 511232k/532480k available (2071k kernel code, 12640k reserved, 877k data, 184k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6982.20 BogoMIPS (lpj=13964410)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Brought up 1 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 1507k freed
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IA-32 Microcode Update Driver: v1.14-xen <tigran@xxxxxxxxxxx>
audit: initializing netlink socket (disabled)
audit(1166113570.914:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key EE5FD53744D1DF1C
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide-floppy driver 0.99.newide
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
XENBUS: Device with no driver: device/vbd/2049
XENBUS: Device with no driver: device/vbd/2050
XENBUS: Device with no driver: device/vif/0
Freeing unused kernel memory: 184k freed
Write protecting the kernel read-only data: 348k
Red Hat nash version  starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
mknod: failed to create /dev/ram0: File exists
mknod: failed to create /dev/ram1: File exists
Setting up hotplug.
Creating block device nodes.
Loading jbd.ko module
Loading ext3.ko module
Loading dm-mod.ko module
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@xxxxxxxxxx
Loading dm-mirror.ko module
Loading dm-zero.ko module
Loading dm-snapshot.ko module
Creating root device.
Mounting root filesystem.
mount: could not find filesystem '/dev/root'
Setting up other filesystems.
Setting up new root fs
setuproot: moving /dev failed: No such file or directory
no fstab.sys, mounting internal defaults
setuproot: error mounting /proc: No such file or directory
setuproot: error mounting /sys: No such file or directory
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
switchroot: mount failed: No such file or directory
Kernel panic - not syncing: Attempted to kill init!

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.