|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] xen dom0 kernel in redhat4.4 with qla2xxx firmware
Hi, have the same setup (Xen 3.0.3 qla2xxx) and i have found out that you dont need the firmware. If the driver doesnt find the firmware it copys it from the adapter. So it should work without (as for me): qla2xxx 0000:07: 00.0: Found an ISP2432, irq 20, iobase 0xffffc20000016000 qla2xxx 0000:07:00.0: Configuring PCI space... qla2xxx 0000:07:00.0: Configure NVRAM parameters... qla2xxx 0000:07:00.0: Verifying loaded RISC code... qla2xxx 0000:07:00.0: Firmware image unavailable. qla2xxx 0000:07:00.0: Firmware images can be retrieved from: ftp://ftp.qlogic.com/outgoing/linux/firmware/. qla2xxx 0000:07:00.0: Attempting to load (potentially outdated) firmware from flash. qla2xxx 0000:07:00.0: Allocated (64 KB) for EFT... qla2xxx 0000:07:00.0: Allocated (1413 KB) for firmware dump... qla2xxx 0000:07: 00.0: Waiting for LIP to complete... qla2xxx 0000:07:00.0: LIP reset occured (f8f7). qla2xxx 0000:07:00.0: LOOP UP detected (4 Gbps). qla2xxx 0000:07:00.0: Topology - (F_Port), Host Loop address 0x0 What i have done (perhaps) different is that i boot from the SAN device and i have activated the apropriate button in the controller bios. So, flash you controller with the actual firmware and forget the error message. regards Martin _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |