Re: [Xen-users] Research -> do participate.....

[nig@xxxxxxxx]

Anant,

i did had zero problems installating a winxp hvm domU on opensuse 10.2,
just did this yesterday.

Hardware: 
MSI 9KN Platinum AM2
Athlon 3600 X2 EE

cheers
frank


> 
> This is what i read about SuSE/Novell that they are planning to support
> windows DomU sometime late quarter next yr. Which forced me to start this
> thread. So after going through all the responce that i got in this thread,
> there is no doubt left . Windows OS can be installed over XEN.
> I am having Fedora core 6 as a host and XEN 3.0.3 and after a lot of tries i
> was able to install SuSE 10 on top of XEN and that too i have to start using
> command in terminal. It doesnt start when i do it from VMM.
> Anyway , when i tried to install windows OS on top of it, immediately after
> setup completes VM disappear and then i cant even open it using command
> line. Only blank screen appears. 
> I choosed FC6 and XEN 3.0.3 because XEN was included in the installation of
> FC6 and i dont have interent for that system to install it after host OS
> installation.
> May be there is some problem with this version. 
> And about my processor..yeh it is fully virtualized intel VT PRO....as
> follows
> 
> [root@localhost ~]# cat /proc/cpuinfo
> processor       : 0
> vendor_id       : GenuineIntel
> cpu family      : 6
> model           : 15
> model name      : Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz
> stepping        : 6
> cpu MHz         : 2128.098
> cache size      : 2048 KB
> fdiv_bug        : no
> hlt_bug         : no
> f00f_bug        : no
> coma_bug        : no
> fpu             : yes
> fpu_exception   : yes
> cpuid level     : 10
> wp              : yes
> flags           : fpu tsc msr pae mce cx8 apic mtrr mca cmov pat pse36
> clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni
> monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm
> bogomips        : 5322.02
> 
> processor       : 1
> vendor_id       : GenuineIntel
> cpu family      : 6
> model           : 15
> model name      : Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz
> stepping        : 6
> cpu MHz         : 2128.098
> cache size      : 2048 KB
> fdiv_bug        : no
> hlt_bug         : no
> f00f_bug        : no
> coma_bug        : no
> fpu             : yes
> fpu_exception   : yes
> cpuid level     : 10
> wp              : yes
> flags           : fpu tsc msr pae mce cx8 apic mtrr mca cmov pat pse36
> clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc up pni
> monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm
> bogomips        : 5322.02
> 
> And memory info as follows....
> In total RAM is 1024MB but when i terminal shows like this after DOM0 starts
> up
> 
> [root@localhost ~]# cat /proc/meminfo
> MemTotal:       398720 kB
> MemFree:         11692 kB
> Buffers:         14064 kB
> Cached:         191996 kB
> SwapCached:          0 kB
> Active:         128492 kB
> Inactive:       158788 kB
> HighTotal:           0 kB
> HighFree:            0 kB
> LowTotal:       398720 kB
> LowFree:         11692 kB
> SwapTotal:     2097144 kB
> SwapFree:      2097144 kB
> Dirty:               8 kB
> Writeback:           0 kB
> AnonPages:       81264 kB
> Mapped:          35828 kB
> Slab:            18400 kB
> PageTables:       5564 kB
> NFS_Unstable:        0 kB
> Bounce:              0 kB
> CommitLimit:   2296504 kB
> Committed_AS:   368468 kB
> VmallocTotal:   450552 kB
> VmallocUsed:      6524 kB
> VmallocChunk:   443508 kB
> 
> AND WHEN I START DOMU SuSE 10 as guest on top of it memory info is like
> this....
> 
> [root@localhost ~]# xm create /etc/xen/linux_test
> Using config file "/etc/xen/linux_test".
> Started domain linux_test
> 
> [root@localhost ~]# cat /proc/meminfo
> MemTotal:       398720 kB
> MemFree:          3452 kB
> Buffers:         15288 kB
> Cached:         179664 kB
> SwapCached:          0 kB
> Active:         148100 kB
> Inactive:       146272 kB
> HighTotal:           0 kB
> HighFree:            0 kB
> LowTotal:       398720 kB
> LowFree:          3452 kB
> SwapTotal:     2097144 kB
> SwapFree:      2097144 kB
> Dirty:              92 kB
> Writeback:           0 kB
> AnonPages:       99472 kB
> Mapped:          38416 kB
> Slab:            18184 kB
> PageTables:       6824 kB
> NFS_Unstable:        0 kB
> Bounce:              0 kB
> CommitLimit:   2296504 kB
> Committed_AS:   418320 kB
> VmallocTotal:   450552 kB
> VmallocUsed:      6640 kB
> VmallocChunk:   443508 kB
> 
> I dont think its because of memory as i try with one VM at a time ...so SuSE
> was successful but not windows .
> 
> Now what do you guys say about my system hardware and all....is it allright
> to have win xp on top of xen or not.
> If there is no problem with the processor then i might try this time with
> some different host and xen version.
> Is there any other version of linux which incude XEN with its installation.
> This time i wanna try with that OS which is already been tested. 
> If there is no other OS which include XEN then is there any other way to
> have XEN if you dont have internet connection like by copying xen on cd or
> something.....
> If not then i might arrange internet for that sys....
> I desperately need that win xp on top of xen.....So do help me out by
> sharing your knowledge friends...
> Thanks a lot to all of you for replying....
> Tschuess..
> 
> 
> -- 
> View this message in context:
> http://www.nabble.com/Research--%3E-do-participate.....-tf2865994.html#a8021952
> Sent from the Xen - User mailing list archive at Nabble.com.
> 
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
> 



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users