[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] domU hardware access




Luca,

you can do with PCI devices, if the DVB-S and AVM ISDN are pci this should work, iÂve done this myself. Just hide the devices in dom0 and give the domUÂs the devices.

( this is explained in the xen manuals, keyword pciback.hide)

Can I let one domU to access to one PCI card, and another domU to another
one?

yes, just assign the individual device to the do domU in the cfg file.

Cant say anything about the dat drive. How is the dat-drive connected  ?

Cheers

Frank


--On Montag, 26. Februar 2007 20:09 +0100 Luca Lucchesi <shacky83@xxxxxxxxxx> wrote:

I need to let some domU to access to some PCI card installed on the dom0.
The domUs are using the same kernel of the dom0 (2.6.18-3-xen-686) and
Xen was installed with apt-get on Debian Etch.
The hardware I need to access on the domUs are a DAT drive, a DVB-s SAT
TV card, an AVM ISDN card, and the dom0 recognised all of these devices
correctly and is using the correct kernel drivers.
Can I let one domU to access to one PCI card, and another domU to another
one?

Could you help me, please?

Thank you very much!



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.