Re: [Bulk] Re: [Xen-users] eth0 / device problem in dom0

[Yves-gaël Chény <yves-gael.cheny@xxxxxxxxxxxxxxxxxxxxxx>]

for 00:04.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet
Controller (rev 05) have you the e1000 module with a 
" lsmod "   ?
regards
yves

phcolaris a écrit :
> hi,
>
> in non-xen system 
> # lspci
> 00:01.0 PCI bridge: Broadcom BCM5785 [HT1000] PCI/PCI-X Bridge
> 00:02.0 Host bridge: Broadcom BCM5785 [HT1000] Legacy South Bridge
> 00:02.1 IDE interface: Broadcom BCM5785 [HT1000] IDE
> 00:02.2 ISA bridge: Broadcom BCM5785 [HT1000] LPC
> 00:03.0 USB Controller: Broadcom BCM5785 [HT1000] USB (rev 01)
> 00:03.1 USB Controller: Broadcom BCM5785 [HT1000] USB (rev 01)
> 00:03.2 USB Controller: Broadcom BCM5785 [HT1000] USB (rev 01)
> 00:04.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet
> Controller (rev 05)
> 00:06.0 VGA compatible controller: XGI Technology Inc. (eXtreme Graphics
> Innovation) Volari Z7
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> HyperTransport Technology Configuration
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Address Map
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> DRAM Controller
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Miscellaneous Control
> 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> HyperTransport Technology Configuration
> 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Address Map
> 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> DRAM Controller
> 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Miscellaneous Control
> 01:0d.0 PCI bridge: Broadcom BCM5785 [HT1000] PCI/PCI-X Bridge (rev c0)
> 02:03.0 PCI bridge: Intel Corporation 80331 [Lindsay] I/O processor
> (PCI-X Bridge) (rev 0a)
> 03:0e.0 RAID bus controller: Areca Technology Corp. ARC-1110 4-Port
> PCI-X to SATA RAID Controller
>
> in xen:
> # lspci
> 00:01.0 PCI bridge: Broadcom BCM5785 [HT1000] PCI/PCI-X Bridge
> 00:02.0 Host bridge: Broadcom BCM5785 [HT1000] Legacy South Bridge
> 00:02.1 IDE interface: Broadcom BCM5785 [HT1000] IDE
> 00:02.2 ISA bridge: Broadcom BCM5785 [HT1000] LPC
> 00:03.0 USB Controller: Broadcom BCM5785 [HT1000] USB (rev 01)
> 00:03.1 USB Controller: Broadcom BCM5785 [HT1000] USB (rev 01)
> 00:03.2 USB Controller: Broadcom BCM5785 [HT1000] USB (rev 01)
> 00:04.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet
> Controller (rev 05)
> 00:06.0 VGA compatible controller: XGI Technology Inc. (eXtreme Graphics
> Innovation) Volari Z7
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> HyperTransport Technology Configuration
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Address Map
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> DRAM Controller
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Miscellaneous Control
> 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> HyperTransport Technology Configuration
> 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Address Map
> 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> DRAM Controller
> 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Miscellaneous Control
> 01:0d.0 PCI bridge: Broadcom BCM5785 [HT1000] PCI/PCI-X Bridge (rev c0)
> 02:03.0 PCI bridge: Intel Corporation 80331 [Lindsay] I/O processor
> (PCI-X Bridge) (rev 0a)
> 03:0e.0 RAID bus controller: Areca Technology Corp. ARC-1110 4-Port
> PCI-X to SATA RAID Controller
>
>
> rgds
> phil
>
> On Tue, 2007-03-27 at 12:53 +0200, Yves-gaël Chény wrote:
>   
> > what's your eth0 is in a lspci ?
> >
> > regards
> > yves
> >
> > phcolaris a écrit :
> >     
> > > hi all,
> > >
> > > I've got the stable xen 3.0.4-1 with the 2.6.16.33 kernel
> > > complied without problems, but in boot I can see this and it doesn't
> > > bring up the eth0
> > >
> > > so I guess I'm missing something in the kernel? the e1000 driver is the
> > > one I need for the network card.
> > >
> > > thanks for any hint
> > >
> > > rgds
> > > phil
> > >
> > >
> > >       
>
>                 
> ___________________________________________________________ 
> Copy addresses and emails from any email account to Yahoo! Mail - quick, easy and free. http://uk.docs.yahoo.com/trueswitch2.html
>   
--
Yves-Gaël Chény
Responsable développements techniques
Responsable Achats techniques
Responsable RH technique

261 route de Clisson 44230 St Sébastien sur Loire
Tel : 02 40 97 62 67 - 08 73 77 24 91
http://www.tranquilitsystems.com/
yves-gael.cheny@xxxxxxxxxxxxxxxxxxxxxx

Tranquil IT Systems . SAS 37 000 ¤

Attachment: yves-gael.cheny.vcf
Description: Vcard

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users