[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] XEN 3.0.4-1 / Iptables is not working properly



Hello,

this is not working in my case.
The Problem still exist.
If this is a real problem, some other people should have the same issue.

Are there any suggestions ??

Regards
Maik


Christo Buschek wrote:
Hello Maik.

I don't really have an explanation for you, but for me to make iptables
work I had to run 'ethtool -K eth0 tx off' inside the vm and dom0 on the
device. That made iptables work for me.

Maybe it also helps you.

greetinx
Christo

On Thu, 2007-04-19 at 09:18 +0200, Maik Brauer wrote:
Hello,

I've installed XEN3.0.4-1 and problems with the IPtables settings.
Please see below the firewall settings for Domain0:
Chain INPUT (policy ACCEPT)
target     prot opt source               destination
ACCEPT     0    --  anywhere             anywhere
ACCEPT     tcp  --  anywhere             mbs-rootsrv         tcp dpt:ssh
ACCEPT 0 -- anywhere anywhere ctstate RELATED,ESTABLISHED LOG 0 -- anywhere anywhere LOG level warning
DROP       0    --  anywhere             anywhere

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination


But then for example connection which are related to a server request (DNS requests / port53, etc) will be blocked by the firewall.
Here is an example of an request:
Apr 19 09:06:19 rootsrv kernel: IN=eth0 OUT= PHYSIN=peth0 PHYSOUT=vif0.0 MAC=00:e4:3c:65:37:37:03:02:85:1a:e2:e0:08:00 SRC=213.133.99.99 DST=88.198.xx.xx LEN=73 TOS=0x00 PREC=0x00 TTL=59 ID=0 DF PROTO=UDP SPT=53 DPT=32803 LEN=53 Apr 19 09:06:20 rootsrv kernel: IN=eth0 OUT= PHYSIN=peth0 PHYSOUT=vif0.0 MAC=00:e4:3c:65:37:37:03:02:85:1a:e2:e0:08:00 SRC=26.104.239.90 DST=88.198.xx.xx LEN=393 TOS=0x00 PREC=0x00 TTL=55 ID=44193 PROTO=UDP SPT=31178 DPT=1026 LEN=373 Apr 19 09:06:24 rootsrv kernel: IN=eth0 OUT= PHYSIN=peth0 PHYSOUT=vif0.0 MAC=00:e4:3c:65:37:37:03:02:85:1a:e2:e0:08:00 SRC=213.133.98.98 DST=88.198.xx.xx LEN=73 TOS=0x00 PREC=0x00 TTL=60 ID=0 DF PROTO=UDP SPT=53 DPT=32804 LEN=53 Apr 19 09:06:27 rootsrv kernel: IN=eth0 OUT= PHYSIN=peth0 PHYSOUT=vif0.0 MAC=00:e4:3c:65:37:37:03:02:85:1a:e2:e0:08:00 SRC=213.133.100.100 DST=88.198.xx.xx LEN=73 TOS=0x00 PREC=0x00 TTL=59 ID=0 DF PROTO=UDP SPT=53 DPT=32805 LEN=53 Apr 19 09:06:33 rootsrv kernel: IN=eth0 OUT= PHYSIN=peth0 PHYSOUT=vif0.0 MAC=00:e4:3c:65:37:37:03:02:85:1a:e2:e0:08:00 SRC=213.133.99.99 DST=88.198.xx.xx LEN=73 TOS=0x00 PREC=0x00 TTL=59 ID=0 DF PROTO=UDP SPT=53 DPT=32803 LEN=53 Apr 19 09:06:38 rootsrv kernel: IN=eth0 OUT= PHYSIN=peth0 PHYSOUT=vif0.0 MAC=00:e4:3c:65:37:37:03:02:85:1a:e2:e0:08:00 SRC=213.133.98.98 DST=88.198.xx.xx LEN=73 TOS=0x00 PREC=0x00 TTL=60 ID=0 DF PROTO=UDP SPT=53 DPT=32804 LEN=53


When I flush the Iptables or I will put in each request then everthing is working fine. But you never now which server will answer to a request, so it is impossible to configure all ip-addresses. This should be done due to the line: -A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
which is unfortunately not working.

What is the problem and the solution ?
Many Thanks.

Kind Regards,
Maik Brauer



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.